Modelling and capability of severe accident simulation code, AZORES to analyze In-Vessel Retention for a loop-type sodium-cooled fast reactor

被引:2
|
作者
Okawa, Tsuyoshi [1 ]
Ariyoshi, Masahiko [1 ]
Ishizu, Tomoko [1 ]
Watanabe, Hiroki [1 ]
Yamamoto, Toshihisa [1 ]
机构
[1] Secretariat Nucl Regulat Author SNRAR, Regulatory Stand & Res Dept, Tokyo, Japan
关键词
Loop-type; Sodium-cooled Fast Reactor; In-Vessel Retention; Severe accident; Simulation code;
D O I
10.1016/j.pnucene.2019.01.011
中图分类号
TL [原子能技术]; O571 [原子核物理学];
学科分类号
0827 ; 082701 ;
摘要
Research and development of the physical models and codes of safety analyses have been promoted for loop-type Sodium-cooled Fast Reactors (SFRs). A severe accident code, AZORES has been developing for the evaluation of molten corium behavior and integrity of reactor and containment vessels. AZORES enables the simulation of plant equipment behavior under severe accident conditions. In recent years, much attention regarding the mitigation of severe accident progression has been attracted to In-Vessel Retention (IVR) of SFRs, which has relatively less existing experimental and analysis results than that of the Light Water Reactor (LWR). This paper describes the status of development for main physical models and preliminary verification for IVR simulation mainly with AZORES. For a verification process, the simulation has been conducted for representative PostAccident Material Relocation (PAMR)/Post-Accident Heat Removal (PAHR) phases subsequent to an Anticipated Transients Without Scram (ATWS) to evaluate the impact of initial conditions on severe accident progression. From the study, it was found that the mass of molten corium and capability of decay heat removal were key parameters for the attainment of IVR. Furthermore, this paper describes the results of Computational Fluid Dynamics (CFD) simulations which have been conducted for molten corium relocation in a control rod assembly and for corium coolability with sodium coolant on the core catcher for the purpose of enhancing the related AZORES physical models.
引用
收藏
页码:156 / 165
页数:10
相关论文
共 40 条
  • [31] Development and Validation of SAS4A Code and Its Application to Analyses on Severe Flow Blockage Accidents in a Sodium-Cooled Fast Reactor
    Fukano, Yoshitaka
    JOURNAL OF NUCLEAR ENGINEERING AND RADIATION SCIENCE, 2019, 5 (01):
  • [32] Inelastic Cyclic Deformation Behaviors of Type 316H Stainless Steel for Reactor Pressure Vessel of Sodium-Cooled Fast Reactor at Elevated Temperatures
    Yoon, Ji-Hyun
    Kim, Young-Chun
    Hong, Seokmin
    Koo, Gyeong-Hoi
    Lee, Bong-Sang
    KOREAN JOURNAL OF METALS AND MATERIALS, 2015, 53 (10): : 681 - 687
  • [33] Inertial impaction behavior of fuel particles under severe accident scenario in pool type sodium cooled fast reactor
    Thilak, B.
    Rao, P. Mangarjuna
    Nashine, B. K.
    Chellapandi, P.
    NUCLEAR ENGINEERING AND DESIGN, 2013, 256 : 285 - 290
  • [34] NUMERICAL ANALYSIS OF UNSTEADY PHENOMENA IN UPPER PLENUM AND HOT-LEG PIPING SYSTEM OF ADVANCED LOOP-TYPE SODIUM COOLED FAST REACTOR
    Takaya, Shigeru
    Fujisaki, Tatsuya
    Tanaka, Masaaki
    PROCEEDINGS OF THE ASME PRESSURE VESSELS AND PIPING CONFERENCE, 2016, VOL 3, 2017,
  • [35] Numerical study of debris bed formation behavior for severe accident in sodium-cooled fast reactor by using least square MPS-DEM method
    Xu, Ruicong
    Liu, Xiaoxing
    Cheng, Songbai
    NUCLEAR ENGINEERING AND DESIGN, 2023, 415
  • [36] The Welded Joint Strength Reduction Factors of Modified 9Cr-1Mo Steel for the Advanced Loop-Type Sodium Cooled Fast Reactor
    Yamashita, Takuya
    Wakai, Takashi
    Onizawa, Takashi
    Satoh, Kenichiro
    Yamamoto, Kenji
    Journal of Pressure Vessel Technology, Transactions of the ASME, 2016, 138 (06):
  • [37] The Welded Joint Strength Reduction Factors of Modified 9Cr-1Mo Steel for the Advanced Loop-Type Sodium Cooled Fast Reactor
    Yamashita, Takuya
    Wakai, Takashi
    Onizawa, Takashi
    Satoh, Kenichiro
    Yamamoto, Kenji
    JOURNAL OF PRESSURE VESSEL TECHNOLOGY-TRANSACTIONS OF THE ASME, 2016, 138 (06):
  • [38] Selection of Severe Accident Prevention and Mitigation Features and Evaluation of Cooling Performance of 3,800 MWt TRU-Contained Sodium-Cooled Fast Reactor
    Lee, Hyunwoo
    Han, Ji-Woong
    Choi, Sun Rock
    Ye, Huee-Youl
    Eoh, Jaehyuk
    ATW-INTERNATIONAL JOURNAL FOR NUCLEAR POWER, 2024, 69 (06): : 70 - 78
  • [39] Overview of the SAS4A Metallic Fuel Models and Extended Analysis of a Postulated Severe Accident in the Prototype Gen-IV Sodium-Cooled Fast Reactor
    Tentner, A. M.
    Karahan, A.
    Kang, S. H.
    NUCLEAR TECHNOLOGY, 2020, 206 (02) : 242 - 254
  • [40] Review on Three-dimensional Numerical Simulation Research of Flow and Heat Transfer Characteristics in Complex Space of Pool-type Sodium-cooled Fast Reactor
    Zhang, Yuhao
    Zhao, Haiqi
    Shen, Xihao
    Yuan, Xiaoxiao
    Song, Haijie
    Lu, Daogang
    Sui, Danting
    Yuanzineng Kexue Jishu/Atomic Energy Science and Technology, 2024, 58 : 271 - 283