Catalysts of Ni/α-Al2O3 and Ni/La2O3-αAl2O3 for hydrogen production by steam reforming of bio-oil aqueous fraction with pyrolytic lignin retention

This paper reports on the steam reforming, in continuous regime, of the aqueous fraction of bio-oil obtained by flash pyrolysis of lignocellulosic biomass (sawdust). The reaction system is provided with two steps in series: i) thermal step at 200 degrees C, for the pyrolytic lignin retention, and ii) reforming in-line of the treated bio-oil in a fluidized bed reactor, in the range 600-800 degrees C, with space-time between 0.10 and 0.45 g(catalyst) h (g(bio-oil))(-1). The benefits of incorporating La2O3 to the Ni/alpha-Al2O3 catalyst on the kinetic behavior (bio-oil conversion, yield and selectivity of hydrogen) and deactivation were determined. The significant role of temperature in gasifying coke precursors was also analyzed. Complete conversion of bio-oil is achieved with the Ni/La2O3-alpha Al2O3 catalyst, at 700 degrees C and space-time of 0.22 g(catalyst) h (g(bio-oil))(-1). The catalyst deactivation is low and the hydrogen yield and selectivity achieved are 96% and 70%, respectively. Copyright (C) 2012, Hydrogen Energy Publications, LLC. Published by Elsevier Ltd. All rights reserved.