Permeation behavior of deuterium implanted into Ti-6A1-4V alloy

被引：0

作者：

Arita, M ^{[1
]}

Hayashi, T ^{[1
]}

Okuno, K ^{[1
]}

Hayashi, Y ^{[1
]}

机构：

[1] KYUSHU UNIV,FAC ENGN,DEPT MAT SCI & ENGN,HAKOZAKI,FUKUOKA 812,JAPAN

来源：

JOURNAL OF NUCLEAR MATERIALS | 1997年 / 248卷

关键词：

D O I：

10.1016/S0022-3115(97)00116-5

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

Permeation of deuterium implanted into Ti-6Al-4V alloy has been studied using 0.5 keV D+ ion beam in the temperature range of 323 to 753 K. Above 600 K, the ratio of steady state permeation flux/incident flux ranges from 3.3 x 10(-3) at 633 K to 4.8 x 10(-3) at 753 K. The activation energy of permeation is about 0.12 eV in this temperature range. At temperatures below 600 K, the permeation flux of deuterium decreases drastically. Deuterium implanted in the lower temperature range desorbed from the alloy by heating after implantation. Thus, the most of the implanted ions remain in the alloy at low temperatures. (C) 1997 Elsevier Science B.V.

引用

页码：60 / 63

页数：4

共 50 条

[1] Permeation behavior of deuterium implanted into Ti-6Al-4V alloy
Japan Atomic Energy Research Inst, Ibaraki-ken, Japan
J Nucl Mater, (60-63):
[2] Reflection, re-emission and permeation of deuterium implanted in Ti-6Al-4V alloy
Bandourko, V.
Ohkoshi, K.
Yamaguchi, K.
Yamawaki, M.
Journal of Nuclear Materials, 241-243 : 1071 - 1075
[3] Reflection, re-emission and permeation of deuterium implanted in Ti-6Al-4V alloy
Bandourko, V
Ohkoshi, K
Yamaguchi, K
Yamawaki, M
JOURNAL OF NUCLEAR MATERIALS, 1997, 241 : 1071 - 1075
[4] BETA PROCESSING OF TI-6A1-4V ALLOY
ROLAND, EH
JOURNAL OF METALS, 1969, 21 (03): : A23 - &
[5] Effect of microstructures on the dynamic deformation behavior of Ti-6A1-4V alloy
Kim, Jin-Young
Shim, In-Ok
Hong, Soon-Hyung
INTERNATIONAL JOURNAL OF MODERN PHYSICS B, 2008, 22 (9-11): : 1221 - 1227
[6] HYDROGEN EMBRITTLEMENT BEHAVIOR OF STRUCTURE CONTROLLED TI-6A1-4V ALLOY
NOZUE, A
OKUBO, T
TOKUNO, K
IKEGAYA, D
TAKATORI, H
TRANSACTIONS OF THE IRON AND STEEL INSTITUTE OF JAPAN, 1987, 27 (04) : B119 - B119
[7] Corrosion behavior of Ti-8Al-1Mo-1V alloy compared to Ti-6A1-4V
Atapour, M.
Pilchak, A. L.
Shamanian, M.
Fathi, M. H.
MATERIALS & DESIGN, 2011, 32 (03) : 1692 - 1696
[8] Corrosion fatigue behavior of Ti-6A1-4V alloy in a simulated physiological environment
Lee, B
Komotori, J
Shimizu, M
Yamazaki, T
PROGRESS IN MECHANICAL BEHAVIOUR OF MATERIALS (ICM8), VOL 1: FATIGUE AND FRACTURE, 1999, : 393 - 397
[9] EVALUATION OF TI-6A1-4V ALLOY FOR ORTHOPEDIC APPLICATIONS
BARDOS, DL
JOURNAL OF BONE AND JOINT SURGERY-AMERICAN VOLUME, 1974, A 56 (04): : 847 - 847
[10] RF PLASMA NITRIDING OF TI-6A1-4V ALLOY
RAVEH, A
AVNI, R
GRILL, A
THIN SOLID FILMS, 1990, 186 (02) : 241 - 256

← 1 2 3 4 5 →