共 50 条
Influence of heat treatment temperature on microstructure and thermal expansion properties of 2D carbon/carbon composites
被引:18
|作者:
Fei, Ying-bo
[1
]
Lu, Jin-hua
[1
]
Li, He-jun
[1
]
Guo, Ling-jun
[1
]
Chen, Zi-shan
[1
]
机构:
[1] Northwestern Polytech Univ, State Key Lab Solidificat Proc, Xian 710072, Peoples R China
来源:
基金:
中国国家自然科学基金;
关键词:
Carbon/carbon composites;
Heat treatment temperature;
Thermal stress;
Thermal expansion;
D O I:
10.1016/j.vacuum.2013.10.018
中图分类号:
T [工业技术];
学科分类号:
08 ;
摘要:
The influence of heat treatment from 1900 to 2650 degrees C on microstructure and thermal expansion properties of thermal gradient chemical vapor infiltration (TCVI)-infiltrated 2D carbon/carbon composites was investigated. The structure evolution was characterized by polarized light microscopy, X-ray diffractometer, Raman spectroscopy and thermal expansion behavior was studied by thermal dilatometer. The results revealed that with the increasing heat treatment temperature, successive microstructural changes in carbon matrix and fibers occurred, and cracks and pores in the composites increased. These resulted in a 35.6% decrease of CTE in Z direction and a 13.9% decrease in XY direction in the composites heat-treated at 2650 degrees C compared with as-deposited composites. The CTE mainly depended on the thermal expansion of matrix in Z direction while it relied on that of the fibers in XY direction. Crown Copyright (C) 2013 Published by Elsevier Ltd. All rights reserved.
引用
收藏
页码:51 / 53
页数:3
相关论文