Stress intensity factor for a thin-walled cylinder containing an edge circumferential crack under bending

被引：0

作者：

Bai, Yang ^{[1
]}

Wang, Jianwei ^{[1
]}

机构：

[1] Henan Univ Technol, Inst Sci & Engn Computat, Zhengzhou 450001, Peoples R China

来源：

ADVANCES IN STRUCTURAL ENGINEERING, PTS 1-3 | 2011年 / 94-96卷

关键词：

Thin-walled cylinder; circumferential crack; pure bending; J-integral; stress intensity factor;

D O I：

10.4028/www.scientific.net/AMM.94-96.1690

中图分类号：

TU [建筑科学];

学科分类号：

0813 ;

摘要：

The elastic stress intensity factors are important parameters used to define the stress level at a crack tip. In the paper, the linear elastic solutions for an infinite thin-walled cylinder containing an circumferential edge crack loaded in bending are studied. The finite element procedure is employed to determine the elastic stress distribution in the immediate vicinity of the crack line and then the corresponding J-integral is evaluated to link the desired stress intensity factor. Finally, numerical examples are given to demonstrate the developed numerical procedure and the effect of different crack depths on stress intensity factor is investigated.

引用

页码：1690 / 1693

页数：4

共 50 条

[31] Normalized stress intensity factor range solutions of an inner-surface circumferential crack in thin- to thick-walled cylinder under thermal striping by semi-analytical numerical method
Meshii, T
Watanabe, K
JOURNAL OF THERMAL STRESSES, 2004, 27 (03) : 253 - 267
[32] Closed-form stress intensity factor for an arbitrarily located inner circumferential surface-crack in a cylinder subjected to axisymmetric bending loads
Meshii, T
Watanabe, K
ENGINEERING FRACTURE MECHANICS, 1998, 59 (05) : 589 - 597
[33] The Stress Analysis of the Centrifuge Concrete Filled Thin-walled Steel Tubula under Bending
Qu, Chen
PROCEEDINGS OF FIRST INTERNATIONAL CONFERENCE OF MODELLING AND SIMULATION, VOL VI: MODELLING AND SIMULATION IN ARCHITECTURE, CIVIL ENGINEERING AND MATERIALS, 2008, : 389 - 393
[34] Closed form stress intensity factor of an arbitrarily located inner-surface circumferential crack in an edge-restraint cylinder under linear radial temperature distribution
Meshii, T
Watanabe, K
ENGINEERING FRACTURE MECHANICS, 1998, 60 (5-6) : 519 - 527
[35] Principal Stress and Principal Strain Response in Thin-walled Cylinder
Zhu, Yun
Zhao, Xueyou
EXPERIMENTAL AND APPLIED MECHANICS, 2014, 518 : 286 - 289
[36] Analysis of Temperature and Stress of a Thin-Walled Cylinder based on FEM
Wu Chang-wei
Wu Yong-hai
Fan Qin-man
MECHATRONICS, ROBOTICS AND AUTOMATION, PTS 1-3, 2013, 373-375 : 12 - 15
[37] Viscoplastic analysis of thin-walled tubes under cyclic bending
Pan, WF
Hsu, CM
STRUCTURAL ENGINEERING AND MECHANICS, 1999, 7 (05) : 457 - 471
[38] ULTIMATE STRENGTH OF THIN-WALLED SECTIONS UNDER COMPRESSION AND BENDING
MOHSIN, ME
SADEK, EA
STRUCTURAL ENGINEER-PART B, 1981, 59 (01): : 16 - 16
[39] Buckling of thin-walled pressurized cylinders under bending load
Limam, A.
Mathon, C.
Combescure, A.
Jullien, J. E.
STRUCTURES AND GRANULAR SOLIDS: FROM SCIENTIFIC PRINCIPLES TO ENGINEERING APPLICATIONS, 2008, : 169 - +
[40] Viscoplastic collapse of thin-walled tubes under cyclic bending
Natl Cheng Kung Univ, Tainan, Taiwan
J Eng Mater Technol Trans ASME, 4 (287-290):

← 1 2 3 4 5 →