Effects of Wear on Cutting Forces in End-Milling Nickel Alloy

被引：0
|
作者：
Estrems, M. [1 ]
Sanchez, H. T. [1 ]
Kurfess, T. [2 ]
Bunget, C. [2 ]
机构：
[1] Univ Politecn Cartagena, Mat & Mfg Engn Dept, Murcia 30202, Spain
[2] Clemson Univ, Int Ctr Automot Res, Clemson, SC 29607 USA
来源：
ADVANCES IN MATERIALS PROCESSING TECHNOLOGIES | 2012年 / 498卷
关键词：
Machining semi-experimental model; Nickel alloy machining; Tool wear;
D O I：
10.4028/www.scientific.net/AMR.498.79
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
The effect of speed on the flank wear of the cutting tool when a nickel alloy is milled is studied. From the analysis of the measured forces, a dynamic semi-experimental model is developed based on the parallelism between the curve of the thrust forces of the unworn tool and the curves when the flank of the tool is worn. Based on the change in the geometry of the contact in the flank worn face, a theory of indentation of the tool on the workpiece is formulated in such a way that upon applying equations of contact mechanics, a good approximation of the experimental results is obtained.
引用
收藏
页码：79 / +
页数：2
相关论文
共 50 条
  • [31] Wave attenuation effects on the chatter instability of end-milling
    Ozoegwu, C. G.
    Omenyi, S. N.
    [J]. NOISE CONTROL ENGINEERING JOURNAL, 2013, 61 (04) : 436 - 444
  • [32] PREDICTION OF TOOL WEAR BASED ON CUTTING FORCES WHEN END MILLING TITANIUM ALLOY TI-6AL-4V
    Stanley, Cynthia
    Ulutan, Durul
    Mears, Laine
    [J]. PROCEEDINGS OF THE ASME 9TH INTERNATIONAL MANUFACTURING SCIENCE AND ENGINEERING CONFERENCE, 2014, VOL 1, 2014,
  • [33] Application of a new thick zone model to the cutting mechanics during end-milling
    Pang, L.
    Hosseini, A.
    Hussein, H. M.
    Deiab, I.
    Kishawy, H. A.
    [J]. INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES, 2015, 96-97 : 91 - 100
  • [34] Effects of Different Coating Materials on Tool Wear, Cutting Forces and Surface Roughness in Milling of
    Kuram, Emel
    [J]. JOURNAL OF POLYTECHNIC-POLITEKNIK DERGISI, 2016, 19 (04): : 433 - 443
  • [35] Cutting forces modeling for end milling of curved surfaces
    Luo Zhi-Wen
    Shi Wei
    Wang Shui-Ming
    Zheng Ji-Gui
    Huang Yu-Ping
    [J]. 2017 CHINESE AUTOMATION CONGRESS (CAC), 2017, : 7462 - 7467
  • [36] Simulation of cutting forces in ball-end milling
    Milfelner, M
    Cus, F
    [J]. ROBOTICS AND COMPUTER-INTEGRATED MANUFACTURING, 2003, 19 (1-2) : 99 - 106
  • [37] Cutting forces in micro-end-milling processes
    Zhang, Xuewei
    Ehmann, Kornel F.
    Yu, Tianbiao
    Wang, Wanshan
    [J]. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, 2016, 107 : 21 - 40
  • [38] Modeling of cutting forces in end milling based on oblique cutting analysis
    Bin Lin
    Lei Wang
    Yu Guo
    Jiming Yao
    [J]. The International Journal of Advanced Manufacturing Technology, 2016, 84 : 727 - 736
  • [39] Forces Shapes in 3-Axis End-Milling: Classification and Characteristic Equations
    Grossi, Niccolo
    Morelli, Lorenzo
    Venturini, Giuseppe
    Scippa, Antonio
    [J]. JOURNAL OF MANUFACTURING AND MATERIALS PROCESSING, 2021, 5 (04):
  • [40] ANALYSIS OF CUTTING FORCES IN BALL-END MILLING
    CHIANG, ST
    TSAI, CM
    LEE, AC
    [J]. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 1995, 47 (3-4) : 231 - 249
12345