Effects of Wear on Cutting Forces in End-Milling Nickel Alloy

被引：0
|
作者：
Estrems, M. [1 ]
Sanchez, H. T. [1 ]
Kurfess, T. [2 ]
Bunget, C. [2 ]
机构：
[1] Univ Politecn Cartagena, Mat & Mfg Engn Dept, Murcia 30202, Spain
[2] Clemson Univ, Int Ctr Automot Res, Clemson, SC 29607 USA
来源：
ADVANCES IN MATERIALS PROCESSING TECHNOLOGIES | 2012年 / 498卷
关键词：
Machining semi-experimental model; Nickel alloy machining; Tool wear;
D O I：
10.4028/www.scientific.net/AMR.498.79
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
The effect of speed on the flank wear of the cutting tool when a nickel alloy is milled is studied. From the analysis of the measured forces, a dynamic semi-experimental model is developed based on the parallelism between the curve of the thrust forces of the unworn tool and the curves when the flank of the tool is worn. Based on the change in the geometry of the contact in the flank worn face, a theory of indentation of the tool on the workpiece is formulated in such a way that upon applying equations of contact mechanics, a good approximation of the experimental results is obtained.
引用
收藏
页码：79 / +
页数：2
相关论文
共 50 条
  • [1] Influence of Speed on Wear and Cutting Forces in End-Milling Nickel Alloy
    Estrems, M.
    Sanchez, H. T.
    Kurfess, T.
    Bunget, C.
    [J]. 4TH MANUFACTURING ENGINEERING SOCIETY INTERNATIONAL CONFERENCE (MESIC 2011), 2012, 1431 : 433 - 440
  • [2] Modeling of cutting forces in micro end-milling
    Yuan, Yanjie
    Jing, Xiubing
    Ehmann, Kornel F.
    Cao, Jian
    Li, Huaizhong
    Zhang, Dawei
    [J]. JOURNAL OF MANUFACTURING PROCESSES, 2018, 31 : 844 - 858
  • [3] Experimental study of cutting forces in micro end-milling
    Jing, Xiubing
    Li, Huaizhong
    Wang, Jun
    Liow, Jong-Leng
    [J]. ADVANCES IN MATERIALS PROCESSING X, 2012, 500 : 357 - +
  • [4] Tool wear and cutting forces variation in high-speed end-milling Ti-6Al-4V alloy
    S. Zhang
    J. F. Li
    J. Sun
    F. Jiang
    [J]. The International Journal of Advanced Manufacturing Technology, 2010, 46 : 69 - 78
  • [5] Tool wear and cutting forces variation in high-speed end-milling Ti-6Al-4V alloy
    Zhang, S.
    Li, J. F.
    Sun, J.
    Jiang, F.
    [J]. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2010, 46 (1-4): : 69 - 78
  • [6] Interrelationships between cutting force variation and tool wear in end-milling
    Sarhan, A
    Sayed, R
    Nassr, AA
    El-Zahry, RM
    [J]. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2001, 109 (03) : 229 - 235
  • [7] Mechanistic model for prediction of cutting forces in micro end-milling and experimental comparison
    Srinivasa, Y. V.
    Shunmugam, M. S.
    [J]. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, 2013, 67 : 18 - 27
  • [8] CUTTING FORCES IN END MILLING
    EGOROV, SN
    PRIMA, VI
    [J]. SOVIET ENGINEERING RESEARCH, 1986, 6 (12): : 82 - 82
  • [9] Experimental modelling of cutting forces as a function of tool wear in end milling
    Ong, PKL
    Mannan, MA
    [J]. ADVANCED MATERIALS PROCESSING II, 2003, 437-4 : 371 - 374
  • [10] An Experiment-based Investigation on Characteristic and Model of Milling Forces during End-milling Aluminum Alloy
    An, Zenghui
    Fu, Xiuli
    Pan, Yanan
    Tang, Aijun
    [J]. CURRENT DEVELOPMENT OF MECHANICAL ENGINEERING AND ENERGY, PTS 1 AND 2, 2014, 494-495 : 602 - +
12345