Lumped parameter identification of a quarter car test rig

被引：0

作者：

Taskin, Y. ^{[1
]}

Yagiz, N. ^{[1
]}

Yuksek, I.

机构：

[1] Istanbul Univ, Fac Engn, Dept Mech Engn, TR-34320 Istanbul, Turkey

来源：

IC-MSQUARE 2012: INTERNATIONAL CONFERENCE ON MATHEMATICAL MODELLING IN PHYSICAL SCIENCES | 2013年 / 410卷

关键词：

SUSPENSION SYSTEM;

D O I：

10.1088/1742-6596/410/1/012089

中图分类号：

O59 [应用物理学];

学科分类号：

摘要：

Quarter car model is a simple and widely used mathematical model to analyze the vibration and control problem of vehicles. In this study, a quarter car test rig is modeled as a lumped parameter system. Model parameters of the system are determined by measurements and experiments. Forced vibration method is used to identify the stiffness and damping parameters of the lumped model. A modal shaker is used to generate the road input in the test rig. The accelerations of the road input, sprung and unsprung masses are measured by piezoelectric accelerometers. The frequency response functions are obtained by using acceleration data. The identified parameters of the test rig are adjusted by comparing the experimental and simulation results.

引用

页数：4

共 50 条

[11] Modeling and Experimental Parameter Identification of a Multicopter via a Compound Pendulum Test Rig
Capello, Elisa
Park, Hyeongjun
Tavora, Bruno
Guglieri, Giorgio
Romano, Marcello
2015 WORKSHOP ON RESEARCH, EDUCATION AND DEVELOPMENT OF UNMANNED AERIAL SYSTEMS (RED-UAS), 2015, : 308 - 317
[12] Development of a general use quarter-vehicle test rig
Langdon, Justin
Southward, Steve C.
19TH INTERNATIONAL CONFERENCE ON DESIGN THEORY AND METHODOLOGY/1ST INTERNATIONAL CONFERENCE ON MICRO AND NANO SYSTEMS, VOL 3, PART A AND B, 2008, : 1239 - 1245
[13] Car-in-the-Loop Complete Vehicle Test Rig
Fietzek, Rafael
Rinderknecht, Stephan
SAE INTERNATIONAL JOURNAL OF PASSENGER CARS-MECHANICAL SYSTEMS, 2015, 8 (02): : 476 - 481
[14] Parameter identification of the fatigue-testing rig
Jaksic, Nikola
Foong, Chee-Hoe
Wiercigroch, Marian
Boltezar, Miha
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES, 2008, 50 (07) : 1142 - 1152
[15] An Hydraulic Test Rig for the Testing of Quarter Turn Valve Actuation Systems
Pugi, Luca
Pallini, Giovanni
Rindi, Andrea
Lucchesi, Nicola
2014 IEEE/ASME 10TH INTERNATIONAL CONFERENCE ON MECHATRONIC AND EMBEDDED SYSTEMS AND APPLICATIONS (MESA 2014), 2014,
[16] Multivariable control for reference tracking on half car test rig
Vaes, David
Smolders, Kris
Swevers, Jan
Sas, Paul
2005 44th IEEE Conference on Decision and Control & European Control Conference, Vols 1-8, 2005, : 6498 - 6503
[17] Lumped modeling and parameter identification of a hydraulic engine mount
Li, Q.
Liu, W. B.
Ji, A. M.
He, G.
PROCEEDINGS OF THE 2016 5TH INTERNATIONAL CONFERENCE ON MEASUREMENT, INSTRUMENTATION AND AUTOMATION (ICMIA 2016), 2016, 138 : 209 - 213
[18] The Classification Detection Technology of Car Quarter Glass Based on the Feature Parameter
Chen, Wei
Lin, Hualiang
Zhai, Yiwu
Luo, Kan
Ma, Ying
Li, Jianxing
2019 CHINESE AUTOMATION CONGRESS (CAC2019), 2019, : 4454 - 4458
[19] Inverse Methodology for the Parameter Identification of a Lumped Parameter Thermal Network for an Induction Machine
Phuc, Pieter Nguyen
Stockman, Kurt
Crevecoeur, Guillaume
2018 INTERNATIONAL SYMPOSIUM ON POWER ELECTRONICS, ELECTRICAL DRIVES, AUTOMATION AND MOTION (SPEEDAM), 2018, : 298 - 303
[20] Parameter Identification of a Lumped Parameter Thermal Model for a Permanent Magnet Synchronous Machine
Guemo, Gilles Guedia
Chantrenne, Patrice
Jac, Julien
2013 IEEE INTERNATIONAL ELECTRIC MACHINES & DRIVES CONFERENCE (IEMDC), 2013, : 1316 - 1320

← 1 2 3 4 5 →