Effect of various pore formers on the microstructural development of tape-cast porous ceramics

被引:46
|
作者
Sarikaya, Ayhan [1 ]
Dogan, Fatih [1 ]
机构
[1] Missouri Univ Sci & Technol, Dept Mat Sci & Engn, Rolla, MO 65409 USA
关键词
Tape casting; Porosity; Fuel cells; Pore former; OXIDE FUEL-CELLS; YTTRIA-STABILIZED ZIRCONIA; FABRICATION; SILICON; INFILTRATION; PERFORMANCE; COMPOSITES; MEMBRANES; POROSITY; ANODES;
D O I
10.1016/j.ceramint.2012.06.041
中图分类号
TQ174 [陶瓷工业]; TB3 [工程材料学];
学科分类号
0805 ; 080502 ;
摘要
Various types of pore formers have been used for the fabrication of ceramics with controlled porosity. This study addresses a detailed and systematic comparison of different pore formers (e.g. graphite, polymethyl methacrylate, sucrose and polystyrene) with distinct features such as size, distribution and morphology of particles and decomposition/oxidation behavior. Investigations also involve their effect on the rheological properties of the slurries and the microstructural development of laminated porous ceramic tapes. Morphological features of the pore former particles were characterized using laser diffraction, B.E.T. surface area measurement and scanning electron microscopy (SEM) techniques as their thermal decomposition/oxidation behavior were determined by thermogravimetric analysis (TGA) and differential thermal analysis (DTA) methods. Tape compositions were developed and optimized in order to incorporate identical volumetric loadings of the materials in the tape formulations with different pore formers for a reliable comparison of their pore forming characteristics. Porous yttria stabilized zirconia (YSZ) ceramics were fabricated without macroscopic defects (e.g. cracks, warpage and delamination) by developing heating profiles based on the identified thermal properties of the pore formers. Characterization of the sintered porous ceramics by SEM and mercury intrusion porosimetry techniques revealed novel relationships between the physical properties of the utilized pore formers, processing parameters and final pore structures. (c) 2012 Elsevier Ltd and Techna Group S.r.l. All rights reserved.
引用
收藏
页码:403 / 413
页数:11
相关论文
共 50 条
  • [41] The effect of tape casting parameters on the properties of textured porous silicon nitride ceramics
    Hu, Yiyang
    Xia, Yongfeng
    Zhu, Ming
    Zhao, Jun
    Yao, Dongxu
    Zeng, Yu-Ping
    INTERNATIONAL JOURNAL OF APPLIED CERAMIC TECHNOLOGY, 2025, 22 (02)
  • [42] Effect of alumina fiber content on pore structure and properties of porous ceramics
    Lang, Ying
    Zhao, Lin
    Dai, Xin
    Wang, Chang-An
    INTERNATIONAL JOURNAL OF APPLIED CERAMIC TECHNOLOGY, 2019, 16 (02) : 814 - 819
  • [43] Effect of pore size on the flexural strength of porous silicon carbide ceramics
    Das, Dulal
    Lucio, Maria Dolores Sosa
    Kultayeva, Shynar
    Kim, Young-Wook
    OPEN CERAMICS, 2024, 17
  • [44] Gelatin tailored pore structure and mechanical properties of freeze-cast porous boron carbide ceramics
    Wang, Yang
    Liu, Qiang
    Zhang, Biao
    Zhang, Haoqian
    Jin, Yicheng
    Zhong, Zhaoxin
    Ye, Feng
    Wang, Wen
    CERAMICS INTERNATIONAL, 2021, 47 (02) : 2897 - 2902
  • [45] Fabrication, microstructural characterization and gas permeability behavior of porous silicon nitride ceramics with controllable pore structures
    Li, Xueqing
    Yao, Dongxu
    Zuo, Kaihui
    Xia, Yongfeng
    Yin, Jinwei
    Liang, Hanqin
    Zeng, Yu-Ping
    JOURNAL OF THE EUROPEAN CERAMIC SOCIETY, 2019, 39 (09) : 2855 - 2861
  • [46] Effect of different nucleation temperatures on the microstructural development of α-SiAlON ceramics
    Kushan, SR
    Mandal, H
    EURO CERAMICS VIII, PTS 1-3, 2004, 264-268 : 1099 - 1102
  • [47] Joining of SiC with Si infiltrated tape-cast TiB2-C interlayer: Effect of interlayer composition and thickness on the microstructure and mechanical properties
    Tian, Wu-Bian
    Kita, Hideki
    Hyuga, Hideki
    Kondo, Naoki
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2011, 530 : 580 - 584
  • [48] POROUS HYDROXYAPATITE CERAMICS PREPARED BY DRY POWDER PRESSING WITH SUCROSE AND BY SUSPENSION FOAMING TECHNIQUES USING WHEAT FLOUR AND OTHER PORE FORMERS
    Hoskovcova, Tereza
    Gregorova, Eva
    Uhlirova, Tereza
    Pabst, Willi
    Sedlarova, Ivona
    Vesely, Martin
    PROCEEDINGS OF THE 10TH INTERNATIONAL CONFERENCE ON POLYSACCHARIDES-GLYCOSCIENCE, 2014, : 182 - 187
  • [49] Evaluation of Pore-Former Size and Volume Fraction on Tape Cast Porous 430 Stainless Steel Substrates for Plasma Spraying
    Yan, Yifei
    Kesler, Olivera
    MATERIALS, 2024, 17 (22)
  • [50] Effect of polyvinyl alcohol additive on the pore structure and morphology of the freeze-cast hydroxyapatite ceramics
    Zuo, Kai Hui
    Zeng, Yu-Ping
    Jiang, Dongliang
    MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS, 2010, 30 (02): : 283 - 287