Seismic response mitigation of chemical plant components by passive control techniques

被引：61

作者：

Paolacci, F. ^{[1
]}

Giannini, R. ^{[1
]}

De Angelis, M. ^{[2
]}

机构：

[1] Univ Roma Tre, Dept Struct, I-00146 Rome, Italy

[2] Univ Roma La Sapienza, Dept Struct & Geotech Engn, I-00184 Rome, Italy

来源：

JOURNAL OF LOSS PREVENTION IN THE PROCESS INDUSTRIES | 2013年 / 26卷 / 05期

关键词：

Chemical plants; Seismic response; Passive control; RISK-ASSESSMENT; STORAGE TANKS; EARTHQUAKE; DESIGN; SYSTEMS; RELIABILITY; PERFORMANCE; PROTECTION; FACILITIES; EQUIPMENT;

D O I：

10.1016/j.jlp.2013.03.003

中图分类号：

TQ [化学工业];

学科分类号：

0817 ;

摘要：

This paper deals with the applicability of seismic passive control in major-hazard chemical installations. The objective is to show numerically and experimentally the applicability of Passive Control Techniques (PCT) in industrial plants. Consequently, the main components of a process plant are classified and collected into a limited number of classes; for each class, the main damages caused by past earthquakes are described and the most vulnerable components are identified. A synthesis of the effects of earthquakes on the different typologies of process components is also presented and the most suitable innovative seismic protection systems, in particular passive control techniques (PCT), are acknowledged. Finally, the effectiveness of PCT in reducing the seismic response of process plant components is proved by three representative case studies: a base isolated above-ground storage tank, a distillation column connected by elastoplastic dampers to the adjacent service frame and an application of non-conventional Tuned Mass Dampers to a support frame. (C) 2013 Elsevier Ltd. All rights reserved.

引用

下载

页码：924 / 935

页数：12

共 50 条

[21] Active/passive seismic control of structures
Han, Sang-Jun
Tsopelas, Panos
Baz, A.
JOURNAL OF EARTHQUAKE ENGINEERING, 2006, 10 (04) : 509 - 526
[22] Passive control of structures for seismic loads
Buckle, Ian G.
Bulletin of the New Zealand National Society for Earthquake Engineering, 2000, 33 (03): : 209 - 221
[23] Seismic response mitigation of a wind turbine via inerter-based structural control
Michael Z. Q. Chen
Zengmei Li
Haoyu Wang
Yinlong Hu
Bulletin of Earthquake Engineering, 2023, 21 : 1361 - 1388
[24] Seismic response mitigation of a wind turbine via inerter-based structural control
Chen, Michael Z. Q.
Li, Zengmei
Wang, Haoyu
Hu, Yinlong
BULLETIN OF EARTHQUAKE ENGINEERING, 2023, 21 (03) : 1361 - 1388
[25] Aerogel for Multipactor Mitigation in RF Passive Components of Satellite Payloads
Vague, Jose Joaquin
Goussetis, George
Boria, Vicente E.
Kunes, Mark
Simoes, Fernando
Bouzekri, Oilid
Reglero, Marta
Mata, Rafael
Raboso, David
IEEE TRANSACTIONS ON MICROWAVE THEORY AND TECHNIQUES, 2024, : 1 - 0
[26] Shake table testing of a passive negative stiffness device with curved leaf springs for seismic response mitigation of structures
Shirai, Kazutaka
Noro, Shuji
Walsh, Kenneth K.
STRUCTURAL CONTROL & HEALTH MONITORING, 2021, 28 (07):
[27] Shape optimization of metallic yielding devices for passive mitigation of seismic energy
Ghabraie, Kazem
Chan, Ricky
Huang, Xiaodong
Xie, Yi Min
ENGINEERING STRUCTURES, 2010, 32 (08) : 2258 - 2267
[28] Seismic response correlation coefficient for the structures, systems and components of the Korean nuclear power plant for seismic probabilistic safety assessment
Eem, Seunghyun
Choi, In Kil
Cha, Sang Lyul
Kwag, Shinyoung
ANNALS OF NUCLEAR ENERGY, 2021, 150
[29] Seismic response control of a building complex utilizing passive friction damper: Experimental investigation
Ng, CL
Xu, YL
EARTHQUAKE ENGINEERING & STRUCTURAL DYNAMICS, 2006, 35 (06): : 657 - 677
[30] Seismic response control of a building complex utilizing passive friction damper: Analytical study
Ng, CL
Xu, YL
STRUCTURAL ENGINEERING AND MECHANICS, 2006, 22 (01) : 85 - 105

← 1 2 3 4 5 →