Fatigue behaviour of Kevlar composites with nanoclay-filled epoxy resin

被引：40
|
作者：
Ferreira, J. A. M. [1 ]
Reis, P. N. B. [2 ]
Costa, J. D. M. [1 ]
Richardson, M. O. W.
机构：
[1] Univ Coimbra, Dept Mech Engn, CEMUC, P-3000 Coimbra, Portugal
[2] Univ Beira Interior, Dept Electromech Engn, Covilha, Portugal
来源：
JOURNAL OF COMPOSITE MATERIALS | 2013年 / 47卷 / 15期
关键词：
Composites; nanoclays; aramid fibre; fatigue; mechanical testing; LOW-VELOCITY IMPACT; INTERLAMINAR FRACTURE-TOUGHNESS; MECHANICAL-PROPERTIES; FIBER COMPOSITES; MODE-I; DELAMINATION; TENSILE; DAMAGE; NANOCOMPOSITES; RESISTANCE;
D O I：
10.1177/0021998312452024
中图分类号：
TB33 [复合材料];
学科分类号：
摘要：
The fatigue behaviour of Kevlar fibre-reinforced composites is a subject not often studied and requires a better understanding. The objective of this study is to characterize the fatigue strength of a Kevlar/epoxy laminate composite as well as the benefits obtained using a nanoclay-filled epoxy matrix. The filler used was an organoclay Cloisite 30B after applying an appropriate silane treatment and other proprietary chemicals to improve the dispersion and interface adhesion. Twelve ply laminates, all in the same direction, of woven bidirectional Kevlar 292, were prepared by hand lay-up, using an SR 1500 epoxy resin. The composite sheets were produced by a vacuum moulding process. The addition of nanoclays reduced static strength and increased the stiffness in both tension and bend loading. Filled composites exhibited tensile fatigue strengths 12% higher than unfilled matrices, but in three-point bending the fatigue strength of filled composites was lower.
引用
收藏
页码：1885 / 1895
页数：11
相关论文
共 50 条
  • [41] Melt blend studies of nanoclay-filled polypropylene (PP)-high-density polyethylene (HDPE) composites
    Mohan, T. P.
    Kanny, K.
    [J]. JOURNAL OF MATERIALS SCIENCE, 2013, 48 (23) : 8292 - 8301
  • [42] Sand erosion behaviour of alumina - Filled epoxy resin
    Saputra, AH
    Kubouchi, M
    Tsuda, K
    Arai, K
    Mitomo, N
    [J]. ADVANCED COMPOSITES LETTERS, 1999, 8 (02) : 71 - 75
  • [43] Wear Behaviour of Epoxy Resin Filled with Hard Powders
    Formisano, A.
    Boccarusso, L.
    Minutolo, F. Capece
    Carrino, L.
    Durante, M.
    Langella, A.
    [J]. PROCEEDINGS OF THE 19TH INTERNATIONAL ESAFORM CONFERENCE ON MATERIAL FORMING (ESAFORM 2016), 2016, 1769
  • [44] Hard and Flexible Nanocomposite Coatings using Nanoclay-Filled Hyperbranched Polymers
    Fogelstrom, Linda
    Malmstrom, Eva
    Johansson, Mats
    Hult, Anders
    [J]. ACS APPLIED MATERIALS & INTERFACES, 2010, 2 (06) : 1679 - 1684
  • [45] Comparison of Theory with Experimental Data for Nanoclay-Filled TPU/PP Blend
    Kannan, Murugasamy
    Bhagawan, Suggu
    Thomas, Sabu
    Joseph, Kuruvilla
    [J]. INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH, 2012, 51 (41) : 13379 - 13392
  • [46] Environmental and fatigue behavior of Kevlar/epoxy composites with prior impact damage
    [J]. Smith, S.H., 1600, (13):
  • [47] Morphological, Thermal and Mechanical Properties of Nanoclay-Filled Polyethylene Oxide Nanocomposites
    Saeed, Khalid
    Ishaq, Mohammad
    Ahmad, Imtiaz
    Shakirullah, Mohammad
    Latifullah
    [J]. JOURNAL OF THE CHEMICAL SOCIETY OF PAKISTAN, 2013, 35 (03): : 699 - 702
  • [48] Mechanical Properties and Morphology of Nanoclay-Filled Different TPU/PP Blends
    Kannan, M.
    Bhagawan, S. S.
    Joseph, Kuruvilla
    Thomas, Sabu
    [J]. POLYMER-PLASTICS TECHNOLOGY AND ENGINEERING, 2009, 48 (08) : 871 - 876
  • [49] Enhancement of the compressive strength of Kevlar-29/epoxy resin unidirectional composites
    D'Aloia, James
    Newell, James A.
    Del Vecchio, Christopher
    Hill, Christopher
    Santino, David
    Russell, Krystal
    [J]. HIGH PERFORMANCE POLYMERS, 2008, 20 (03) : 357 - 364
  • [50] Water barrier properties of nanoclay filled sisal fibre reinforced epoxy composites
    Mohan, T. P.
    Kanny, K.
    [J]. COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING, 2011, 42 (04) : 385 - 393
12345