Experimental investigation of convection heat transfer in converging-diverging wall channels

被引：24

作者：

Pehlivan, H. ^{[1
]}

机构：

[1] Sakarya Univ, Dept Mech Engn, Sakarya, Turkey

来源：

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER | 2013年 / 66卷

关键词：

Converging-diverging channel; Convection heat transfer enhancement; AIR-SIDE PERFORMANCE; HERRINGBONE WAVY FIN; PRESSURE-DROP; FLUID-FLOW; TRANSFER ENHANCEMENT; TRANSFER COEFFICIENT; LIQUID FLOW; TUBE ROWS; EXCHANGER; NUMBER;

D O I：

10.1016/j.ijheatmasstransfer.2013.06.033

中图分类号：

O414.1 [热力学];

学科分类号：

摘要：

In this study, heat transfer and pressure drop characteristics of air flow in corrugated channels have been experimentally investigated. Experiments were performed on channels of uniform wall heat flux and varied Reynolds Number (Re) from 2000 to 9000. Four different types, two sharp and two rounded corrugation peak, finned plates are used in present experiments. The effects of channel height on heat transfer and pressure drop are obtained and discussed. The increase of corrugated angle and channel height tends to increase heat transfer. (C) 2013 Elsevier Ltd. All rights reserved.

引用

页码：128 / 138

页数：11

共 50 条

[31] Effect of wall roughness on the flow through converging-diverging nozzles
Krishnamurty, VS
Shyy, W
[J]. JOURNAL OF PROPULSION AND POWER, 1997, 13 (06) : 753 - 762
[32] HEAT TRANSFER AND PRESSURE DROP CHARACTERISTICS IN A CONVERGING-DIVERGING DUCT (HEAT TRANSFER AND PRESSURE RESPONSES TO ROUNDING OF PEAKS).
Asako, Yutaka
Nakamura, Hiroshi
Faghiri, Mohammad
[J]. Nippon Kikai Gakkai Ronbunshu, B Hen/Transactions of the Japan Society of Mechanical Engineers, Part B, 1986, 52 (477): : 2170 - 2176
[33] Prediction of convection heat transfer in converging-diverging tube for laminar air flowing using back-propagation neural network
Taymaz, Imdat
Islamoglu, Yasar
[J]. INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER, 2009, 36 (06) : 614 - 617
[34] A correlation for mixed convection heat transfer from converging, parallel and diverging channels with uniform volumetric heat generating plates
Premachandran, B
Balaji, C
[J]. INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER, 2006, 33 (03) : 350 - 356
[35] Dynamical flow characterization of transitional and chaotic regimes in converging-diverging channels
Guzman, A.M.
Amon, C.H.
[J]. Journal of Fluid Mechanics, 1996, 321 : 25 - 57
[36] NUMERICAL INVESTIGATION OF CAVITATING FLOW IN A HORIZONTAL CONVERGING-DIVERGING NOZZLE
Zamoum, Mohammed
Boucetta, Rachid
Kessal, Mohand
[J]. PROCEEDINGS OF CHT-21 ICHMT INTERNATIONAL SYMPOSIUM ON ADVANCES IN COMPUTATIONAL HEAT TRANSFER, 2021, 2021,
[37] NUMERICAL INVESTIGATION OF CHOCKED CONVERGING-DIVERGING NOZZLES FOR THRUSTER APPLICATION
Noh, M. H. M.
Hamid, A. H. A.
Atan, R.
Rashid, H.
[J]. IIUM ENGINEERING JOURNAL, 2011, 12 (03): : 10 - 18
[38] Experimental and numerical investigation of pressure drop and heat transfer coefficient in converging–diverging microchannel heat sink
M. K. Dheepan Chakravarthii
D. Mutharasu
S. Shanmugan
[J]. Heat and Mass Transfer, 2017, 53 : 2265 - 2277
[39] Experimental study on radial voidage distribution in converging-diverging riser
Bie, Rushan
Yang, Lidan
Li, Jinghai
[J]. Huaxue Fanying Gongcheng Yu Gongyi/Chemical Reaction Engineering and Technology, 1996, 12 (01):
[40] Experimental Study of Flow Structure in Converging-Diverging Axisymmetric Geometry
Volent, Eirik
Sagmo, Kristian
Solemslie, Bjorn Winther
Dahlhaug, Ole Gunnar
[J]. JOURNAL OF FLUIDS ENGINEERING-TRANSACTIONS OF THE ASME, 2020, 142 (04):

← 1 2 3 4 5 →