Laser Welding of Deep Drawing 08Al Killed Steel Sheet

被引：0
|
作者：
Liu, J. [1 ]
Shi, Y. [1 ]
Wang, Y-Q. [2 ]
Yang, Z-K. [2 ]
Zhang, H. [1 ]
机构：
[1] Changchun Univ Sci & Technol, Sch Electromech Engn, Changchun 130022, Jilin, Peoples R China
[2] Inner Mongolia First Machinery Grp Corp, Inst Technol, Baotou 014032, Inner Mongolia, Peoples R China
来源：
LASERS IN ENGINEERING | 2015年 / 31卷 / 5-6期
关键词：
CO2; laser; laser welding; 08Al killed steel; deep drawing; manufacturing technique; distortion; cylinder;
D O I：
暂无
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
This paper investigated the laser welding technology on deep drawing 08Al killed steel sheets by slab CO2 laser in order to reduce its welding distortion and improve its welding efficiency. The microstructure of the welded joints was examined with scanning electron microscope (SEM), while the properties were investigated by means of microhardness tester and tensile testing machine. Firstly, welding parameters of laser power, welding speed, and defocusing distance were optimized. Secondly, using of the optimized parameters, the cylinders were manufactured by the laser power of 2.00 kW, welding speed of 1.50 m/min, defocusing distance of 5.00mm, shielding gas of 101/min He and 151/min Ar. After deformation test, it was found that CO2 laser welded cylinders could meet the technical requirements, with the inner diameter of 173(0)(+2)mm and a cylindricity of less than 1.00mm.
引用
收藏
页码：299 / 314
页数：16
相关论文
共 50 条
  • [21] Metallurgical Mechanisms in the Production of Deep Drawing Sheet of Aluminum Killed Very Low Carbon Steel - 3.
    Aubrun, Ph.
    Rocquet, P.
    Memoires Scientifiques de la Revue de Metallurgie, 1974, 71 (01): : 1 - 8
  • [22] METALLURGICAL ASPECTS OF PREPARATION OF EXTRA-MILD AL-KILLED STEEL SHEETS FOR DEEP DRAWING
    AUBRUN, P
    ROCQUET, P
    MEMOIRES SCIENTIFIQUES DE LA REVUE DE METALLURGIE, 1973, 70 (7-8): : 569 - 575
  • [23] Recrystallization behavior of cold rolled 4A60/08Al steel clad strips
    Zeng, Xiang-Yong
    Li, Long
    Zhou, De-Jing
    Cailiao Rechuli Xuebao/Transactions of Materials and Heat Treatment, 2015, 36 (08): : 73 - 78
  • [24] Analysis of Sheet Steel Fracture during Deep Drawing
    McDougall, J. L.
    Stevenson, M. E.
    McKeever, K.
    JOURNAL OF FAILURE ANALYSIS AND PREVENTION, 2005, 5 (05) : 20 - 25
  • [25] CORROSION-RESISTANCE OF DEEP DRAWING SHEET STEEL
    PLOSHKIN, VV
    VAGANOV, PG
    RYABYSHEV, AM
    METAL SCIENCE AND HEAT TREATMENT, 1982, 24 (7-8) : 448 - 451
  • [26] Formation and bonding properties of Al(4A60)-steel(08Al) clad strip intermetallic compound
    Chen, Xin
    Li, Long
    Zhou, De-Jing
    Zhongguo Youse Jinshu Xuebao/Chinese Journal of Nonferrous Metals, 2015, 25 (05): : 1176 - 1184
  • [27] PRODUCTION OF NON-AGEING STEEL SHEET KILLED WITH ALUMINIUM AND REQUIRED FOR COMPLEX DRAWING
    SIFTSOV, GV
    STAL IN ENGLISH-USSR, 1965, (08): : 629 - &
  • [28] Numerical analysis of 08AL one time drawing process to CA488 engine oil - Bottom shell
    Li, S.-H.
    Suxing Gongcheng Xuebao/Journal of Plasticity Engineering, 2001, 8 (03): : 42 - 44
  • [29] Research on hot-rolled deep drawing steel sheet
    Chen, Y
    Chen, X
    Li, CY
    Li, XY
    PRICM 4: FORTH PACIFIC RIM INTERNATIONAL CONFERENCE ON ADVANCED MATERIALS AND PROCESSING, VOLS I AND II, 2001, : 2355 - 2358
  • [30] Hydraulic concrete as a deep-drawing tool of sheet steel
    Schwartzentruber, A
    Bournazel, JP
    Gacel, JN
    CEMENT AND CONCRETE RESEARCH, 1999, 29 (02) : 267 - 271
12345