Influence of Al(Er) interlayer on the mechanical properties of AlN(Er) coatings

被引:14
|
作者
Oliveira, JC [1 ]
Cavaleiro, A [1 ]
Vieira, MT [1 ]
机构
[1] Univ Coimbra, ICEMS, Dept Engn Mecan, P-3030 Coimbra, Portugal
来源
SURFACE & COATINGS TECHNOLOGY | 2002年 / 151卷
关键词
aluminium nitrides; erbium; sputtering; interlayer; adhesion;
D O I
10.1016/S0257-8972(01)01631-0
中图分类号
TB3 [工程材料学];
学科分类号
0805 ; 080502 ;
摘要
AIN(Er) thin films were deposited by sputtering on M2 steel (AISI) and Si substrates with different thickness of an AI(Er) interlayer. No significant variations were observed in the chemical composition and structure of the AIN(Er) films. The films in all cases presented excess nitrogen in relation to AIN stoichiometry. The diffraction peaks were strongly shifted to lower angles due to the presence of Er. The hardness of the films is approximately 32 GPa and does not change with the thickness of the AI(Er) interlayer. The cohesion and adhesion of the AIN(Er) films were improved with the inclusion of the AI(Er) interlayer; the cohesive and adhesive critical load values increased from 7 and 17 N to 15 and 27 N, respectively. (C) 2002 Elsevier Science B.V. All rights reserved.
引用
收藏
页码:466 / 470
页数:5
相关论文
共 50 条
  • [41] Characteristics of nanocrystalline AlN:Er films co-deposited by using AlN, Er, and SiO2 targets
    Lim, J.-W.
    Takayama, W.
    Zhu, Y. F.
    Bae, J. W.
    Wang, J. F.
    Ji, S. Y.
    Mimura, K.
    Yoo, J. H.
    Isshiki, M.
    MATERIALS LETTERS, 2007, 61 (17) : 3740 - 3745
  • [42] Microstructure and mechanical properties of Al-Mg-Er sheets jointed by friction stir welding
    Hao, H. L.
    Ni, D. R.
    Zhang, Z.
    Wang, D.
    Xiao, B. L.
    Ma, Z. Y.
    MATERIALS & DESIGN, 2013, 52 : 706 - 712
  • [43] Microstructure and Mechanical Properties of a Precipitation-Hardened Al-Mn-Zr-Er Alloy
    Farkoosh, Amir R.
    Seidman, David N.
    Dunand, David C.
    LIGHT METALS 2021, 50TH EDITION, 2021, : 239 - 244
  • [44] Microstructures and Mechanical Properties of As-Cast Al-Cu-Si Alloys with Addition of Er
    Yu C.
    Guo H.
    Deng B.
    Yang K.
    Hu W.
    Xiyou Jinshu/Chinese Journal of Rare Metals, 2023, 47 (08): : 1079 - 1087
  • [45] Microstructure and mechanical properties of novel Al-Mg-Mn-Zr-Sc-Er alloy
    Pozdniakov, A. V.
    Yarasu, V.
    Barkov, R. Yu.
    Yakovtseva, O. A.
    Makhov, S. V.
    Napalkov, V. I.
    MATERIALS LETTERS, 2017, 202 : 116 - 119
  • [46] Effect of Zr and Er on the microstructure, mechanical and electrical properties of Al-0.4Fe alloy
    Jia, Zhihong (zhihongjia@cqu.edu.cn); Liu, Manping (manpingliu@ujs.edu.cn), 1600, Elsevier Ltd (857):
  • [47] Effect of Annealing on Microstructures and Mechanical Properties of Er Bearing 5A06 Al Alloy
    Li Zhenqing
    Huang Hui
    Wen Shengping
    Wang Wei
    Nie Zuoren
    RARE METAL MATERIALS AND ENGINEERING, 2011, 40 : 95 - 98
  • [48] Microstructure and Mechanical Properties of an Al-Zr-Er High Temperature Alloy Microalloyed with Tungsten
    Farkoosh, A. R.
    Dunand, David
    Seidman, David N.
    LIGHT METALS 2019, 2019, : 379 - 383
  • [49] Effect of Zr and Er on the microstructure, mechanical and electrical properties of Al-0.4Fe alloy
    Kong, Yaping
    Jia, Zhihong
    Liu, Zhipeng
    Liu, Manping
    Roven, Hans J.
    Liu, Qing
    JOURNAL OF ALLOYS AND COMPOUNDS, 2021, 857
  • [50] Microstructures and Mechanical Properties of 1441 Al-Li Alloy with Er Micro-Alloying
    Liu D.
    Li J.
    Zheng Z.
    Chen Y.
    Zhang X.
    Xiyou Jinshu/Chinese Journal of Rare Metals, 2017, 41 (07): : 725 - 732