Chemical degradation of 3d printed polymers

被引：0

作者：

Kaspar, Vaclav ^{[1
]}

Rozlivka, Jakub ^{[1
]}

机构：

[1] Mendel Univ Brno, Dept Technol & Automobile Transport, Zemedelska 1, Brno 61300, Czech Republic

来源：

MENDELNET 2019: PROCEEDINGS OF 26TH INTERNATIONAL PHD STUDENTS CONFERENCE | 2019年

关键词：

3d printing; tensile test; chemical degradation; liquid fertilizer;

D O I：

暂无

中图分类号：

S [农业科学];

学科分类号：

09 ;

摘要：

This template describes the features of the components created by additive technology called 3d printing. The material tested was PETG. This is a very popular print material. Normalized samples in the fish bone shape with a 20% grid fill were tested. The tested samples were subjected to chemical degradation in various types of environments and subsequently a tensile test was performed. The result of the research is the influence of the degradation factor on the mechanical properties of these samples and possible use in practice, specifically in agriculture.

引用

页码：511 / 515

页数：5

共 50 条

[41] Evaluation of mechanical properties of 3D printed PETG and Polyamide (6) polymers
Sri, S. V. Lakshman
Karthick, A.
Dinesh, C.
CHEMICAL PHYSICS IMPACT, 2024, 8
[42] Enhancing mechanical properties of 3D printed thermoplastic polymers by annealing in moulds
Vorkapic, Milos
Mladenovic, Ivana
Ivanov, Toni
Kovacevic, Aleksandar
Hasan, Mohammad Sakib
Simonovic, Aleksandar
Trajkovic, Isaak
ADVANCES IN MECHANICAL ENGINEERING, 2022, 14 (08)
[43] Metallization of Thermoplastic Polymers and Composites 3D Printed by Fused Filament Fabrication
Romani, Alessia
Mantelli, Andrea
Tralli, Paolo
Turri, Stefano
Levi, Marinella
Suriano, Raffaella
TECHNOLOGIES, 2021, 9 (03)
[44] Penetration testing of 3D printed projectiles made of various types of polymers
Bisic, Muhamed
Razic, Faruk
Pandzic, Adi
Bevrnja, Mustafa
JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY, 2023, 37 (11) : 5535 - 5539
[45] Indentation experiments and simulations of nonuniformly photocrosslinked polymers in 3D printed structures
Zhao, Zeang
Wu, Dong
Chen, Hao-Sen
Qi, H. Jerry
Fang, Daining
ADDITIVE MANUFACTURING, 2020, 35
[46] Tensile strengths of polyamide based 3D printed polymers in liquid nitrogen
Cruz, P.
Shoemake, E. D.
Adam, P.
Leachman, J.
ADVANCES IN CRYOGENIC ENGINEERING - MATERIALS: PROCEEDINGS OF THE INTERNATIONAL CRYOGENIC MATERIALS CONFERENCE (ICMC) 2015, 2015, 102
[47] Moisture-induced changes in the mechanical behavior of 3D printed polymers
Banjo, Adedotun D.
Agrawal, Vinamra
Auad, Maria L.
Celestine, Asha-Dee N.
COMPOSITES PART C: OPEN ACCESS, 2022, 7
[48] Manufacture dependent differential biodegradation of 3D printed shape memory polymers
Akman, Ryan
Ramaraju, Harsha
Moore, Samuel
Verga, Adam
Hollister, Scott J.
VIRTUAL AND PHYSICAL PROTOTYPING, 2024, 19 (01)
[49] Thermal properties of 3D printed products from the most common polymers
Irina Bute
Sergejs Tarasovs
Sergejs Vidinejevs
Laima Vevere
Jevgenijs Sevcenko
Andrey Aniskevich
The International Journal of Advanced Manufacturing Technology, 2023, 124 : 2739 - 2753
[50] Fracture resistance measurement of fused deposition modeling 3D printed polymers
Aliheidari, Nahal
Tripuraneni, Rajasekhar
Ameli, Amir
Nadimpalli, Siva
POLYMER TESTING, 2017, 60 : 94 - 101

← 1 2 3 4 5 →