Finite Element Simulation of Orthogonal Cutting of Nodular Cast Iron

被引：0

作者：

Zhang, S. W. ^{[1
]}

Gong, C. Y. ^{[1
]}

Fang, X. F. ^{[1
]}

Zhu, C. S. ^{[1
]}

Jia, W. ^{[2
]}

机构：

[1] Jiangsu Univ Sci & Technol, Zhenjiang, Peoples R China

[2] HuDong Heavy Machinery Co Ltd, Shanghai, Peoples R China

来源：

MANUFACTURING AUTOMATION TECHNOLOGY | 2009年 / 392-394卷

关键词：

Cutting machining; Nodular cast iron; Constitutive relationship; FE simulation; FLOW;

D O I：

10.4028/www.scientific.net/KEM.392-394.929

中图分类号：

TP [自动化技术、计算机技术];

学科分类号：

0812 ;

摘要：

Some key techniques such as material constitutive model, friction characteristics at tool-chip interface were discussed. And the constitutive equation for nodular cast iron 500-7 was established. Then the simulation software DEFORM-2D was used to simulate the orthogonal cutting process. Finally, the influences of cutting parameters and tool geometries on cutting forces, cutting temperature and chip morphology were analyzed. This study provides some academic support to the optimization of cutting parameters for nodular cast irons.

引用

页码：929 / +

页数：2

共 50 条

[31] Coupled thermo-mechanical model for metal orthogonal cutting process and finite element simulation
Huang, Zhi-Gang
Ke, Ying-Lin
Wang, Li-Tao
Hangkong Xuebao/Acta Aeronautica et Astronautica Sinica, 2004, 25 (03): : 317 - 320
[32] 3D Finite Element Simulation on the Orthogonal Cutting Processes with Different Commercial Codes
Mou, Z. Y.
Gao, P. F.
Wang, W. F.
Wen, D. H.
HIGH SPEED MACHINING, 2011, 188 : 555 - 560
[33] Thermomechanical finite element simulation and correlation analysis for orthogonal cutting of normalized AISI 9310 steels
Lilia Miller
Kai Zhou
Jiong Tang
Lesley D. Frame
Rainer J. Hebert
Lakshmi Ravi Narayan
S. Pamir Alpay
Alexandra Merkouriou
Jeongho Kim
The International Journal of Advanced Manufacturing Technology, 2021, 114 : 3337 - 3356
[34] Effects of flow stress and friction models in finite element simulation of orthogonal cutting -: A sensitivity analysis
Sartkulvanich, P
Altan, T
Göcmen, A
MACHINING SCIENCE AND TECHNOLOGY, 2005, 9 (01) : 1 - 26
[35] Thermomechanical finite element simulation and correlation analysis for orthogonal cutting of normalized AISI 9310 steels
Miller, Lilia
Zhou, Kai
Tang, Jiong
Frame, Lesley D.
Hebert, Rainer J.
Narayan, Lakshmi Ravi
Alpay, S. Pamir
Merkouriou, Alexandra
Kim, Jeongho
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2021, 114 (11-12): : 3337 - 3356
[36] Computer simulation of AISI D2 orthogonal cutting using finite element method
Yan, L.
Jiang, F.
Rong, Y.M.
Key Engineering Materials, 2012, 499 : 39 - 44
[37] Rigid-thermoviscoplastic finite element simulation of non-steady-state orthogonal cutting
Ko, DC
Ko, SL
Kim, BM
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2002, 130 : 345 - 350
[38] Finite element simulation of the process of orthogonal metal cutting based on the ANSYS/LS-DYNA
Li, Guohe
Wang, Minjie
Duan, Chunzheng
Nongye Jixie Xuebao/Transactions of the Chinese Society of Agricultural Machinery, 2007, 38 (12): : 173 - 176
[39] Study on "Single Factor" Material Model Used in Finite Element Simulation of High Speed Cutting of Mo-Cr Cast Iron
Yang, Yong
Chen, Chengjun
Li, Changhe
APPLIED MECHANICS AND MECHANICAL ENGINEERING, PTS 1-3, 2010, 29-32 : 365 - 369
[40] Finite Element Simulation of Orthogonal Cutting of H13-Hardened Steel to Evaluate the Influence of Coatings on Cutting Temperature
Hao, Guangchao
Tang, Aijun
Zhang, Zhenzhong
Xing, Hongyu
Xu, Nan
Duan, Ran
COATINGS, 2024, 14 (03)

← 1 2 3 4 5 →