Determination of adhesion between corrosion product film and carbon steel by a scratch test

被引：2
|
作者：
Zhu, X. L. [1 ]
Lu, X. F. [1 ]
Ling, X. [1 ]
机构：
[1] Nanjing Univ Technol, Dept Mech Engn, Nanjing 211816, Jiangsu, Peoples R China
来源：
MATERIALS AND CORROSION-WERKSTOFFE UND KORROSION | 2013年 / 64卷 / 10期
关键词：
adhesion; carbon steel; corrosion product film; scratch test; THIN-FILMS; COATINGS; RESISTANCE; ENERGY;
D O I：
10.1002/maco.201206863
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
A scratch test is used to measure the adhesion between corrosion product film (CPF) and carbon steel in deionized water under different pH and temperatures. The fuzzy feature model is modified to minimize errors between calculation and scanning electron microscopy (SEM) results. Findings illustrate that the maximum error decreases to 11%. The adhesion between CPF and substrate increases with rising temperature and pH of deionized water. The Poisson's ratio and Young's modulus of CPF are in the ranges [0.34 and 0.45] and [0.08 and 0.11GPa], respectively, as temperature and pH change.
引用
收藏
页码：876 / 880
页数：5
相关论文
共 50 条
  • [21] AN INVESTIGATION OF CORROSION-RESISTING FILM ON CARBON-STEEL
    XIE, SF
    HUANG, ZQ
    [J]. JOURNAL OF THE ELECTROCHEMICAL SOCIETY, 1987, 134 (8B) : C422 - C422
  • [22] Naphthenic acid corrosion characteristic and corrosion product film resistance of carbon steel and Cr5Mo low alloy steel in secondary vacuum gas oil
    Liu, G. Q.
    Zhang, X. L.
    Qu, D. R.
    Zheng, Y. G.
    Jiang, S. L.
    Jiang, X.
    Yang, Q. X.
    Han, F. L.
    [J]. CORROSION ENGINEERING SCIENCE AND TECHNOLOGY, 2016, 51 (06) : 445 - 454
  • [23] COMPARISON BETWEEN THE SCRATCH ADHESION TEST AND TRIBOLOGICAL TEST CONCERNING CRITICAL LOADS AND FAILURE MODES OF PHYSICALLY VAPOR-DEPOSITED HARD COATINGS ON STEEL SUBSTRATES
    ROCHOTZKI, R
    VETTER, J
    WEISSMANTEL, E
    [J]. THIN SOLID FILMS, 1991, 198 (1-2) : 103 - 108
  • [24] Characterization of organic ultra-thin film adhesion on flexible substrate using scratch test technique
    Covarel, G.
    Bensaid, B.
    Boddaert, X.
    Giljean, S.
    Benaben, P.
    Louis, P.
    [J]. SURFACE & COATINGS TECHNOLOGY, 2012, 211 : 138 - 142
  • [25] CARBON EXCHANGE BETWEEN STEEL AND SODIUM AS A CORROSION PHENOMENON
    BORGSTEDT, HU
    FREES, G
    [J]. WERKSTOFFE UND KORROSION-MATERIALS AND CORROSION, 1990, 41 (01): : 1 - 6
  • [26] CO2 corrosion prediction on 20# steel under the influence of corrosion product film
    Liu, Yingxue
    Jiang, Hongye
    Xu, Taolong
    Li, Youlv
    [J]. PETROLEUM, 2023, 9 (03) : 427 - 438
  • [27] Corrosion processes of carbon steel in argillite: Galvanic effects associated with the heterogeneity of the corrosion product layer
    Romaine, Alexandre
    Jeannin, Marc
    Sabot, Rene
    Necib, Sophia
    Refait, Philippe
    [J]. ELECTROCHIMICA ACTA, 2015, 182 : 1019 - 1028
  • [28] Localized corrosion of carbon steel in marine media: Galvanic coupling and heterogeneity of the corrosion product layer
    Refait, Ph.
    Grolleau, A. -M.
    Jeannin, M.
    Francois, E.
    Sabot, R.
    [J]. CORROSION SCIENCE, 2016, 111 : 583 - 595
  • [29] THE ATMOSPHERIC CORROSION OF UNPROTECTED CARBON-STEEL - A COMPARISON BETWEEN FIELD-STUDY AND LABORATORY TEST
    JOHANSSON, LG
    VANNERBERG, NG
    [J]. WERKSTOFFE UND KORROSION-MATERIALS AND CORROSION, 1981, 32 (06): : 265 - 268
  • [30] Polydopamine Nanomembranes as Adhesion Layers for Improved Corrosion Resistance in Low Carbon Steel
    Ding, Zihao
    Fatollahi-Fard, Farzin
    Kwon, Ik Soo
    Pistorius, Petrus Christiaan
    Bettinger, Christopher J.
    [J]. ADVANCED ENGINEERING MATERIALS, 2018, 20 (11)
12345