Determination of adhesion between corrosion product film and carbon steel by a scratch test

被引：2
|
作者：
Zhu, X. L. [1 ]
Lu, X. F. [1 ]
Ling, X. [1 ]
机构：
[1] Nanjing Univ Technol, Dept Mech Engn, Nanjing 211816, Jiangsu, Peoples R China
来源：
MATERIALS AND CORROSION-WERKSTOFFE UND KORROSION | 2013年 / 64卷 / 10期
关键词：
adhesion; carbon steel; corrosion product film; scratch test; THIN-FILMS; COATINGS; RESISTANCE; ENERGY;
D O I：
10.1002/maco.201206863
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
A scratch test is used to measure the adhesion between corrosion product film (CPF) and carbon steel in deionized water under different pH and temperatures. The fuzzy feature model is modified to minimize errors between calculation and scanning electron microscopy (SEM) results. Findings illustrate that the maximum error decreases to 11%. The adhesion between CPF and substrate increases with rising temperature and pH of deionized water. The Poisson's ratio and Young's modulus of CPF are in the ranges [0.34 and 0.45] and [0.08 and 0.11GPa], respectively, as temperature and pH change.
引用
收藏
页码：876 / 880
页数：5
相关论文
共 50 条
  • [1] Assessment of adhesion between thin film and silicon based on a scratch test
    Lee, Jung-Eun
    Kim, Hym-Joon
    Kim, Dae-Eun
    [J]. JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY, 2010, 24 (01) : 97 - 101
  • [2] Assessment of adhesion between thin film and silicon based on a scratch test
    Jung-Eun Lee
    Hyun-Joon Kim
    Dae-Eun Kim
    [J]. Journal of Mechanical Science and Technology, 2010, 24 : 97 - 101
  • [3] THE DEVELOPMENT OF THE SCRATCH TEST TECHNIQUE FOR THE DETERMINATION OF THE ADHESION OF COATINGS
    LAUGIER, M
    [J]. THIN SOLID FILMS, 1981, 76 (03) : 289 - 294
  • [4] Failure mode maps in the thin film scratch adhesion test
    Bull, SJ
    [J]. TRIBOLOGY INTERNATIONAL, 1997, 30 (07) : 491 - 498
  • [5] DETERMINATION OF ADHESION STRENGTH BETWEEN A CARBON-FILM AND A POLYMERIC SUBSTRATE
    VORONKIN, MA
    DUB, SN
    LUPICH, IN
    MASLYUK, BA
    [J]. DIAMOND AND RELATED MATERIALS, 1994, 3 (1-2) : 116 - 118
  • [6] CORROSION AND WEAR OF 304-STAINLESS STEEL USING A SCRATCH TEST
    ADLER, TA
    WALTERS, RP
    [J]. CORROSION SCIENCE, 1992, 33 (12) : 1855 - 1876
  • [7] Organic ultrathin film adhesion on compliant substrate using scratch test technique
    Boddaert, X.
    Covarel, G.
    Bensaid, B.
    Mattei, M.
    Benaben, P.
    Bois, J.
    [J]. THIN SOLID FILMS, 2013, 528 : 194 - 198
  • [8] TECHNIQUE FOR DETECTING CRITICAL LOADS IN SCRATCH TEST FOR THIN-FILM ADHESION
    GREENE, JE
    WOODHOUSE, J
    PESTES, M
    [J]. REVIEW OF SCIENTIFIC INSTRUMENTS, 1974, 45 (06): : 747 - 749
  • [9] THE ADHESION OF CHEMICALLY VAPOUR-DEPOSITED HARD COATINGS TO STEEL - THE SCRATCH TEST
    PERRY, AJ
    [J]. THIN SOLID FILMS, 1981, 78 (01) : 77 - 93
  • [10] Numerical simulation of carbon steel atmospheric corrosion under varying electrolyte-film thickness and corrosion product porosity
    Wenchao Li
    Kangning Liu
    Jiangshun Wu
    Qinglin Lian
    Yujie Qiang
    Jinshan Pan
    Ying Jin
    [J]. npj Materials Degradation, 7
12345