Fatigue and Fatigue Crack Growth Behavior of Tool Steel

被引：0
|
作者：
Sajuri, Z. [1 ]
Syarif, J. [1 ]
Omar, M. Z. [1 ]
Allafi, M. M. [1 ]
Sudar, M. F. [1 ]
机构：
[1] Univ Kebangsaan Malaysia, Dept Mech & Mat Engn, Bangi 43600, Selangor, Malaysia
来源：
PROCEEDINGS OF THE 1ST WSEAS INTERNATIONAL CONFERENCE ON MATERIALS SCIENCE (MATERIALS'08) | 2008年
关键词：
Fatigue; FCG; Inclusion; Stress intensity factor; Life prediction; Tool steel;
D O I：
暂无
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Fatigue and fatigue crack growth (FCG) behaviors of tool steel were investigated at room temperature. Fatigue tests were performed under a load control with sinusoidal waveform of stress ratio R=0.1 at a frequency of 10Hz. The fatigue crack was identified nucleated from inclusion presents at specimen surface. The inclusion became the stress raiser and acts as the fatigue fracture origin. The fatigue limit value was observed at 396Mpa. The threshold stress intensity factor range obtained from the fatigue crack growth test was 8.06MPam(1/2). The fatigue crack growth curve was then used to predict the fatigue life based on modified Paris equation. The predicted lives were in good agreement with the experimental results.
引用
收藏
页码：53 / 56
页数：4
相关论文
共 50 条
  • [21] Thermal fatigue crack growth in stainless steel
    Kadlec, M.
    Hausild, P.
    Siegl, J.
    Materna, A.
    Bystriansky, J.
    INTERNATIONAL JOURNAL OF PRESSURE VESSELS AND PIPING, 2012, 98 : 89 - 94
  • [22] Fatigue crack growth retardation in welded steel
    Garwood, SJ
    Maddox, SJ
    INTERNATIONAL CONFERENCE ON FATIGUE OF WELDED COMPONENTS AND STRUCTURES, 1996, : 217 - 224
  • [23] Fatigue crack growth behavior of surface crack in rails
    Seo, Jungwon
    Kwon, Seokjin
    Jun, Hynukyu
    Lee, Donghyeong
    FATIGUE 2010, 2010, 2 (01): : 865 - 872
  • [24] Fatigue crack growth in inhomogeneous steel components
    Firrao, D.
    Matteis, P.
    Spena, P. Russo
    Mortarino, G. M. M.
    INTERNATIONAL JOURNAL OF FATIGUE, 2010, 32 (05) : 864 - 869
  • [25] On striations and fatigue crack growth in 1018 steel
    Cai, H
    McEvily, AJ
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2001, 314 (1-2): : 86 - 89
  • [26] Crack growth behavior at thermal fatigue of H13 tool steel processed by laser surface melting
    Jia, Zhi-xin
    Liu, Yao-wei
    Li, Ji-qiang
    Liu, Li-jun
    Li, Hong-lin
    INTERNATIONAL JOURNAL OF FATIGUE, 2015, 78 : 61 - 71
  • [27] Fatigue crack growth behavior of selective laser melted martensitic stainless steel
    Jiang, Chong-Ming
    Ho, Jeng-Rong
    Tung, Pi-Cheng
    Lin, Chih-Kuang
    INTERNATIONAL JOURNAL OF FATIGUE, 2024, 179
  • [28] Fatigue Crack Growth Behavior of Austempered AISI 4140 Steel with Dissolved Hydrogen
    Nagarajan, Varun Ramasagara
    Putatunda, Susil K.
    Boileau, James
    METALS, 2017, 7 (11):
  • [29] Analysis of the fatigue crack growth behavior of a low N Austenitic stainless steel
    Babu, M. Nani
    Sasikala, G.
    Sadananda, K.
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2018, 726 : 18 - 20
  • [30] EFFECTS OF GASEOUS HYDROGEN ON FATIGUE CRACK GROWTH BEHAVIOR OF LOW CARBON STEEL
    Lee, Dongsun
    Nishikawa, Hide-aki
    Oda, Yasuji
    Noguchi, Hiroshi
    ASME PRESSURE VESSELS AND PIPING CONFERENCE 2009, VOL 3: DESIGN AND ANALYSIS, 2010, : 499 - 507
12345