Bending Analysis and Measures of the Forming of Automobile Semi-axle on Cross-Wedge Rolling with Multi-wedge

被引：7

作者：

Shu, Xuedao ^{[1
]}

Li, Zhan ^{[1
]}

Zu, Wangming ^{[2
]}

机构：

[1] Ningbo Univ, Fac Mech Engn & Mech, Ningbo 315000, Zhejiang, Peoples R China

[2] Univ Sci & Technol, Coll Mech Engn, Beijing 100083, Peoples R China

来源：

FRONTIERS OF MECHANICAL ENGINEERING AND MATERIALS ENGINEERING, PTS 1 AND 2 | 2012年 / 184-185卷

关键词：

Cross wedge rolling; Automobile semi-axle; Rolling bending measures;

D O I：

10.4028/www.scientific.net/AMM.184-185.75

中图分类号：

TH [机械、仪表工业];

学科分类号：

0802 ;

摘要：

When forming automobile semi-axle using Multi-wedges Cross-Wedge Rolling (MCWR), it is difficult to avoid the rolling bending phenomenon. Thus to improve the product quality for finding out the causes and preventing rolling bending is essential. In this paper, the finite element model(FEM) analysis software Deform-3D was used to analyze the bending causes, and giving the corresponding measures from numerical simulation of the forming of multi-wedge automobile semi-axle using Cross-Wedge Rolling. Based on the corresponding simulation experiments, the results indicate that the measures are feasible. The results of this study for rolling forming of automobile semi-axle can improve product quality and provide a theoretical basis.

引用

页码：75 / +

页数：2

共 50 条

[1] OPTIMIZATION DESIGN OF THE DIE OF SYNCHRONIZATION ROLLING AXLE ON CROSS-WEDGE ROLLING WITH MULTI-WEDGE
Shu Xue dao
Li Chuan min
Hu Zheng huan
[J]. NUMIFORM 2010, VOLS 1 AND 2: DEDICATED TO PROFESSOR O. C. ZIENKIEWICZ (1921-2009), 2010, 1252 : 1087 - +
[2] The Stress and Strain Analysis in the Broadening Stage of Multi-wedge Synchrostep Rolling Railway Axle by Cross-wedge Rolling
Shu, Xuedao
Xiao, Min
Li, Chuanmin
Hu, Zhenghuan
[J]. ADVANCES IN ENGINEERING DESIGN AND OPTIMIZATION, PTS 1 AND 2, 2011, 37-38 : 1561 - +
[3] Feasibility Study on Forming Hollow Axle with Multi-wedge Synchrostep by Cross Wedge Rolling
Sun, Baoshou
Zeng, Xuelei
Shu, Xuedao
Peng, Wenfei
Sun, Pei
[J]. ADVANCES IN ENGINEERING DESIGN AND OPTIMIZATION III, PTS 1 AND 2, 2012, 201-202 : 673 - +
[4] Simulation of forming automotive semi-axes with multi-wedge cross wedge rolling
Zhao, Jing
Lu, Liqun
Hu, Zhenghuan
[J]. INTERNATIONAL JOURNAL OF COMPUTER APPLICATIONS IN TECHNOLOGY, 2011, 41 (1-2) : 17 - 21
[5] Study on varying rule of mechanical parameters in forming automobile semi-axes with multi-wedge cross wedge rolling
Zhao, Jing
Lu, Liqun
Hu, Zhenghuan
[J]. PROCEEDINGS OF THE INTERNATIONAL CONFERENCE ON MECHANICAL ENGINEERING AND MECHANICS 2007, VOLS 1 AND 2, 2007, : 1723 - 1727
[6] Study on Stress and Strain Distribution in Stretching Stage Forming Automobile Semi-axis with Multi-wedge Cross Wedge Rolling
Lu Liqun
[J]. ICMS2010: PROCEEDINGS OF THE THIRD INTERNATIONAL CONFERENCE ON MODELLING AND SIMULATION, VOL 1: ENGINEERING COMPUTATION AND FINITE ELEMENT ANALYSIS, 2010, : 453 - 456
[7] The Strain Analysis at the Broadening Stage of the Hollow Railway Axle by Multi-wedge Cross Wedge Rolling
Hu, Bin
Shu, Xuedao
Yu, Penghui
Peng, Wenfei
[J]. CURRENT DEVELOPMENT OF MECHANICAL ENGINEERING AND ENERGY, PTS 1 AND 2, 2014, 494-495 : 457 - +
[8] Mechanism Research on Multi-wedge Synchrostep Rolling Asymmetric Shaft-Parts by Cross-wedge Rolling
Chen, Leping
Shu, Xuedao
Peng, Wenfei
Sun, Baoshou
[J]. ADVANCES IN ENGINEERING DESIGN AND OPTIMIZATION III, PTS 1 AND 2, 2012, 201-202 : 1061 - 1065
[9] The Application of Multi-wedge Cross Wedge Rolling Forming Long Shaft Technology
Zhao, Jing
Lu, Liqun
[J]. ADVANCES IN ENGINEERING DESIGN AND OPTIMIZATION II, PTS 1 AND 2, 2012, 102-102 : 1002 - 1005
[10] The Mechanism on Defect of Transition Section with Multi-Wedge Cross Wedge Rolling Forming Automotive Semi-Axis
Zhao Jing
Lu Liqun
[J]. PROCEEDINGS OF THE SECOND INTERNATIONAL CONFERENCE ON MODELLING AND SIMULATION (ICMS2009), VOL 6, 2009, : 167 - 170

← 1 2 3 4 5 →