Mechanical Performance of Honeycomb Sandwich Structures Using Three-Point Bend Test

被引：0
|
作者：
Subhani, Tayyab [1 ]
机构：
[1] Univ Hail, Coll Engn, Dept Mech Engn, Hail, Saudi Arabia
来源：
ENGINEERING TECHNOLOGY & APPLIED SCIENCE RESEARCH | 2019年 / 9卷 / 02期
关键词：
honeycomb sandwich; mechanical; three-point bend test; epoxy; carbon fiber; PANELS; FAILURE; FILLET; SKIN;
D O I：
暂无
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
In this study, honeycomb sandwich structures were prepared and tested. Facesheets of sandwich structures were manufactured by carbon fiber epoxy matrix composites while Nomex (R) honeycomb was used as core material. An epoxy-based adhesive film was used to bond the composite facesheets with honeycomb core. Four different curing temperatures ranging from 100 degrees C to 130 degrees C were applied with curing times of 2h and 3h. Three-point bend test was performed to investigate the mechanical performance of honeycomb sandwich structures and thus optimize the curing parameters. It was revealed that the combination of a temperature of 110 degrees C along with a curing time of 2h offered the optimum mechanical performance together with low damage in honeycomb core and facesheets.
引用
收藏
页码：3955 / 3958
页数：4
相关论文
共 50 条
  • [21] Effects of mechanical heterogeneity on plastic zones of welded three-point bend specimens
    Xue, H
    Shi, YW
    INTERNATIONAL JOURNAL OF PRESSURE VESSELS AND PIPING, 1998, 75 (07) : 575 - 580
  • [22] On the measurement of concrete fracture energy using three-point bend tests
    M. Elices
    G. V. Guinea
    J. Planas
    Materials and Structures, 1997, 30 : 375 - 376
  • [23] On the measurement of concrete fracture energy using three-point bend tests
    Elices, M
    Guinea, GV
    Planas, J
    MATERIALS AND STRUCTURES, 1997, 30 (200) : 375 - 376
  • [24] Fracture properties of fibrous self compacting concrete using three-point bend test and wedge splitting test methods
    Rajeshwari, B. Raja
    Sivakumar, M. V. N.
    INTERNATIONAL JOURNAL OF STRUCTURAL INTEGRITY, 2022, 13 (02) : 278 - 296
  • [25] Three-point bending performance of sandwich panels with various types of cores
    Xia, Fukun
    Durandet, Yvonne
    Tan, P. J.
    Ruan, Dong
    THIN-WALLED STRUCTURES, 2022, 179
  • [26] Mechanical Characterisation of Truss Models by Three-Point Bending Test
    Jeongho Choi
    International Journal of Steel Structures, 2023, 23 : 331 - 344
  • [27] Mechanical Characterisation of Truss Models by Three-Point Bending Test
    Choi, Jeongho
    INTERNATIONAL JOURNAL OF STEEL STRUCTURES, 2023, 23 (02) : 331 - 344
  • [28] Mechanical performance of honeycomb sandwich structures built by FDM printing technique
    Gohar, S.
    Hussain, G.
    Ali, A.
    Ahmad, H.
    JOURNAL OF THERMOPLASTIC COMPOSITE MATERIALS, 2023, 36 (01) : 182 - 200
  • [29] Toughness Measurement of Cemented Carbides with Chevron-Notched Three-Point Bend Test
    Deng, Xin
    Bitler, Jon
    Chawla, Krishan K.
    Patterson, Burton R.
    ADVANCED ENGINEERING MATERIALS, 2010, 12 (09) : 948 - 952
  • [30] Mechanical behavior of a thin nonwoven polyester mat subjected to three-point bend tests
    Purcarea, R.
    Motoc, D. Luca
    Scutaru, M. L.
    OPTOELECTRONICS AND ADVANCED MATERIALS-RAPID COMMUNICATIONS, 2012, 6 (1-2): : 214 - 217
12345