The eCoMove Simulation Test Bed

被引:1
|
作者
Benz, Thomas [1 ]
El Ghouti, Norddin [2 ]
Krietsch, Florian [1 ]
Mathias, Paul [3 ]
Peyeron, Florian [4 ]
Themann, Philipp [5 ]
机构
[1] PTV AG, D-76131 Karlsruhe, Germany
[2] DAF Trucks NV, NL-5600 PT Eindhoven, Netherlands
[3] Mat Traff GmbH, D-52062 Aachen, Germany
[4] Volvo Technol France, F-69800 St Priest, France
[5] Ika RWTH Aachen, D-52074 Aachen, Germany
来源
关键词
Emission reduction; simulation; freight; logistics;
D O I
10.1016/j.sbspro.2012.06.1171
中图分类号
U [交通运输];
学科分类号
08 ; 0823 ;
摘要
In the EU FP7 project, eCoMove "green" ITS applications are being developed and tested. Within eCoMove, sub-project 4 is dedicated to the challenge of reducing CO2 emissions in the field of freight & logistics. A set of applications is therefore being developed, approaching the tasks tour planning based on traffic information, driver support tools and post trip assessment. The underlying research activity focuses on two main aspects: One is the development of a dedicated software tool and assistance components to holistically optimize the actions of drivers and logistics planners; the other is to provide the setup of a dedicated freight & logistics test bed, which includes the driver model and the adaptation of HGV models as well as the modeling of logistical scenarios in a microscopic simulation using the simulation environment VISSIM. For this purpose a dedicated test bed of freight & logistics simulations is to be deployed. In this simulation test bed eCoMove applications will be rolled out and tested with focus on urban and interurban environments covering some specific scenarios. In the first stage, the simulation test bed will be used for the initial parameterization of the tools & components in the development phase before the start of a real world implementation. In the second stage, field tests with eCoMove equipped vehicles will be carried out. Thus data coming from the field about vehicle behavior itself but also concerning traffic situations will be collected and reviewed in the post trip analysis. Results will be used to improve the microscopic simulations, which will then be applied for the impact assessment. This allows to identify further reduction potentials as well as to adjust the applications. This paper summarizes the development of the simulation test bed and also explains the cooperation with in-vehicle components. First functionalities for logistics planning are shown. (C) 2012 Published by Elsevier Ltd. Selection and/or peer review under responsibility of the Programme Committee of the Transport Research Arena 2012
引用
收藏
页码:1983 / 1992
页数:10
相关论文
共 50 条
  • [41] A modular real-time simulation platform based on the virtual test bed
    Figueroa, Hernan P.
    Bastos, Jimena L.
    Monti, Antonello
    Dougal, Roger
    [J]. 2006 IEEE INTERNATIONAL SYMPOSIUM ON INDUSTRIAL ELECTRONICS, VOLS 1-7, 2006, : 1537 - +
  • [42] Simulation of centrifugal inertia forces on a test bed of blow-molding machines
    Arakelian, V
    [J]. MECHANICS RESEARCH COMMUNICATIONS, 2005, 32 (02) : 201 - 208
  • [43] Relative Motion Transformation for Ground Robotics Test Bed in Rendezvous/Docking Simulation
    Lim, Jaewook
    Park, Sejun
    Park, Kyung-Mi
    Son, Donghoon
    Cho, Dong-Hyun
    [J]. INTERNATIONAL JOURNAL OF AERONAUTICAL AND SPACE SCIENCES, 2024, : 302 - 313
  • [44] A flexible test-bed pilot facility for the analysis and simulation of Smart Microgrids
    de Simon-Martin, Miguel
    Bracco, Stefano
    Rossi, Mansueto
    Delfino, Federico
    Gonzalez-Martinez, Alberto
    Juan Blanes-Peiro, Jorge
    [J]. 2019 IEEE INTERNATIONAL CONFERENCE ON ENVIRONMENT AND ELECTRICAL ENGINEERING AND 2019 IEEE INDUSTRIAL AND COMMERCIAL POWER SYSTEMS EUROPE (EEEIC / I&CPS EUROPE), 2019,
  • [45] Design and Implementation of Damage Simulation Structural Health Monitoring test-bed
    Yuan Mei
    Liang Yuxuan
    Dong Shaopeng
    Yu Liang
    [J]. 2015 FIFTH INTERNATIONAL CONFERENCE ON INSTRUMENTATION AND MEASUREMENT, COMPUTER, COMMUNICATION AND CONTROL (IMCCC), 2015, : 1071 - 1076
  • [46] Design of Dynamic MCFC Simulation Bed for MBOP Feasibility Test of Marine Applications
    Sung, Taehong
    Kim, Kyung Chun
    [J]. ADVANCES IN ENERGY SCIENCE AND TECHNOLOGY, PTS 1-4, 2013, 291-294 : 589 - 592
  • [47] TO THE TEST BED, WITH LOVE
    HERSCHBERG, B
    VANDENHERIK, J
    [J]. ICCA JOURNAL, 1991, 14 (03): : 113 - 114
  • [48] CELLULOSIC TEST BED
    Voith, Melody
    [J]. CHEMICAL & ENGINEERING NEWS, 2009, 87 (44) : 20 - 21
  • [49] No test bed is an island
    [J]. Automot Eng (London), 4 (22):
  • [50] Fully resolved simulation of a gas-fluidized bed: A critical test of DEM models
    Kriebitzsch, S. H. L.
    van der Hoef, M. A.
    Kuipers, J. A. M.
    [J]. CHEMICAL ENGINEERING SCIENCE, 2013, 91 : 1 - 4