Effect of W content on the compression properties and abrasive wear behavior of the (TiB2-TiCxNy)/(Ni plus W) composites

被引：16
|
作者：
Wang, Yawei
Shu, Shili
Qiu, Feng
Zhou, Dongshuai
Wang, Jinguo [1 ]
Jiang, Qichuan
机构：
[1] Jilin Univ, Minist Educ, Key Lab Automobile Mat, Changchun 130025, Peoples R China
来源：
MATERIALS & DESIGN | 2013年 / 45卷
基金：
中国国家自然科学基金;
关键词：
A. Metal matrix composites; C. Powder metallurgy; E; Wear; NI-BASED CERMETS; MECHANICAL-PROPERTIES; COMBUSTION SYNTHESIS; HIGH-TEMPERATURE; MICROSTRUCTURE; PARTICLES; PRESSURE; TIB2; MO;
D O I：
10.1016/j.matdes.2012.09.021
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
The (TiB2-TiCxNy)/(Ni + W) composites were fabricated successfully by the method of combustion synthesis and hot press consolidation in the Ni-W-Ti-B4C-BN system. The effect of the content of W on the hardness, compression properties and abrasive wear behavior of the composites was investigated. The results indicate that with increasing W content from 0 to 8 wt.%, the average sizes of the TiB2 and TiCxNy particles decrease firstly and then keep almost constant, while the hardness and the compression strength increase firstly and then change a little. The abrasive wear resistance of the composites increases firstly and then decreases with the increase in the W content. (c) 2012 Elsevier Ltd. All rights reserved.
引用
收藏
页码：286 / 291
页数：6
相关论文
共 50 条
  • [31] Effect of TiB2 content on microstructure and properties of in situ Ti-TiB composites
    Harshpreet Singh
    Muhammad Hayat
    Hongzhou Zhang
    Raj Das
    Peng Cao
    International Journal of Minerals, Metallurgy, and Materials, 2019, 26 : 915 - 924
  • [32] Effect of TiB2 content on microstructure and properties of in situ Ti-TiB composites
    Singh, Harshpreet
    Hayat, Muhammad
    Zhang, Hongzhou
    Das, Raj
    Cao, Peng
    INTERNATIONAL JOURNAL OF MINERALS METALLURGY AND MATERIALS, 2019, 26 (07) : 915 - 924
  • [33] Laser cladding with (WC+W2C)/Co-Cr-C and (WC+W2C)/Ni-B-Si composites for enhanced abrasive wear resistance
    Gassmann, RC
    MATERIALS SCIENCE AND TECHNOLOGY, 1996, 12 (08) : 691 - 696
  • [34] Effect of (Ni,Mo) and (W,Ti)C on the Microstructure and Mechanical Properties of TiB2 Ceramic Tool Materials
    Yang, Tongchun
    Huang, Chuanzhen
    Liu, Hanlian
    Zou, Bin
    Zhu, Hongtao
    Wang, Jun
    HIGH SPEED MACHINING V, 2012, 723 : 233 - +
  • [35] Effect of NbC content on microstructure and mechanical properties of W-NbC composites
    Wei, Boxin
    Wang, Yujin
    Zhao, Yanwei
    Wang, Dong
    Song, Guiming
    Fu, Yudong
    Zhou, Yu
    INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS, 2018, 70 : 66 - 76
  • [36] Microstructures, Properties and Fracture Behavior of Solidified TiC-TiB2 Composites with increasing content of TiB2
    Huang, Xuegang
    Zhang, Long
    Zhao, Zhongmin
    Pan, Chuanzeng
    HIGH-PERFORMANCE CERAMICS VII, PTS 1 AND 2, 2012, 512-515 : 685 - 690
  • [37] Effect of electroplating temperature on microstructure, corrosion, and wear behavior of Ni-P-W-TiO2 coating
    Sadeghi, Sajjad
    Ebrahimifar, Hadi
    INDIAN JOURNAL OF ENGINEERING AND MATERIALS SCIENCES, 2022, 29 (01) : 108 - 115
  • [38] Effect of Ni content on the wear behavior of Al–Si–Cu–Mg–Ni/SiC particles composites
    Yanyu Liu
    Lina Jia
    Wenbo Wang
    Zuheng Jin
    Hu Zhang
    International Journal of Minerals,Metallurgy and Materials, 2024, (02) : 374 - 383
  • [39] The influence of TiB2 content on microstructure and properties of W-30Cu composites prepared by electroless plating and powder metallurgy
    Huang, Li-Mei
    Luo, Lai-Ma
    Cheng, Ji-Gui
    Zhu, Xiao-Yong
    Wu, Yu-Cheng
    ADVANCED POWDER TECHNOLOGY, 2015, 26 (04) : 1058 - 1063
  • [40] Properties and abrasive wear of TiB2/Al-4%Cu composites produced by hot isostatic pressing
    Tjong, SC
    Lau, KC
    COMPOSITES SCIENCE AND TECHNOLOGY, 1999, 59 (13) : 2005 - 2013
12345