Corrosion behaviour of Al-Si/SiC composite in sea water

被引：0
|
作者：
Gnecco, F [1 ]
Beccaria, AM [1 ]
机构：
[1] CNR, MITER, Ist Corros Marina Met, I-16149 Genoa, Italy
来源：
BRITISH CORROSION JOURNAL | 1999年 / 34卷 / 01期
关键词：
D O I：
10.1179/bcj.1999.34.1.57
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
A study was made of the corrosion behaviour in sea water of a metal matrix composite (MMC) of Al-si alloy reinforced with SiC particles. Free corrosion and electrochemical tests were carried out at 25 degrees C in quiescent sea water at pH 8.2 containing 6.5 ppm dissolved oxygen. The microstructure if as examined by metallographic microscopy and by X-my microdiffractometry; electrochemical properties (pitting resistance, polarisation resistance) were investigated by potentiodynamic polarisation and electrochemical impedance spectroscopy; pitting formation was observed by optical microscopy; and the corrosion layer was characterised by X-ray photoelectron spectroscopy. In sea water the MMC suffered localised corrosion of the metallic matrix where Al-Cu intermetallic compounds ale present. Pit formation was enhanced by copper enrichment in the surface layer. The MMC showed a small passivity domain which increased slowly,with immersion time. No domain of perfect passivity was present. The SiC particles acted as cathodic sites with respect to the metallic matrix, which experienced selective aluminium dissolution.
引用
收藏
页码：57 / 62
页数：6
相关论文
共 50 条
  • [1] Microstructural, mechanical and corrosion behaviour of Al-Si alloy reinforced with SiC metal matrix composite
    Bandil, Kapil
    Vashisth, Himanshu
    Kumar, Sourav
    Verma, Lokesh
    Jamwal, Anbesh
    Kumar, Devendra
    Singh, Neera
    Sadasivuni, Kishor Kumar
    Gupta, Pallav
    JOURNAL OF COMPOSITE MATERIALS, 2019, 53 (28-30) : 4215 - 4223
  • [2] Fabrication and behaviour of Al-Si/SiC composite in cavitation conditions
    Cosic, M.
    Dojcinovic, M.
    Acimovic-Pavlovic, Z.
    INTERNATIONAL JOURNAL OF CAST METALS RESEARCH, 2014, 27 (01) : 49 - 55
  • [3] Microstructure, mechanical properties, wear and corrosion behaviour of Al-Si/FLYASHP composite
    Ramachandra, M
    Radhakrishna, K
    MATERIALS SCIENCE AND TECHNOLOGY, 2005, 21 (11) : 1337 - 1343
  • [4] Unveiling the corrosion perspective of Al-Si alloy/SiC foam interpenetrating phase composite
    Bhuyan, P.
    Kota, N.
    Bairagi, D.
    Sahasrabudhe, S.
    Roy, S.
    Mandal, S.
    MATERIALS TODAY COMMUNICATIONS, 2023, 35
  • [5] Tribological Behaviour of SiC Particle Reinforced Al-Si Alloy
    Kaur, Kamalpreet
    Anant, Ramkishor
    Pandey, O. P.
    TRIBOLOGY LETTERS, 2011, 44 (01) : 41 - 58
  • [6] Hardness and corrosion behaviour of anodised Al-Si produced by rheocasting
    Zhu, Baiwei
    Zanella, Caterina
    MATERIALS & DESIGN, 2019, 173
  • [7] YAG laser cladding of an Al-Si alloy onto an Mg/SiC composite for the improvement of corrosion resistance
    Wang, AH
    Yue, TM
    COMPOSITES SCIENCE AND TECHNOLOGY, 2001, 61 (11) : 1549 - 1554
  • [8] Laser assisted Al-Si-SiC composite layer formation on an Al-Si alloy
    Jaffar, MJM
    Sastikumar, D
    Nath, AK
    LASERS IN ENGINEERING, 2005, 15 (5-6) : 393 - 411
  • [9] Corrosion Behaviour of Al Alloys in Sea Water
    Kamarudin, S. R. M.
    Daud, M.
    Muhamad, A.
    Sattar, M. S.
    Daud, A. R.
    INTERNATIONAL CONFERENCE ON ADVANCEMENT OF MATERIALS AND NANOTECHNOLOGY 2007, 2010, 1217 : 72 - +
  • [10] Corrosion behavior of an Al-Si casting and a sintered Al/Si composite immersed into biodiesel and blends
    Pereira Elias, Alfredo Luis
    Koizumi, Murilo Shiniti
    Ortiz, Eder Lopes
    Queiroz Rodrigues, Joao Felipe
    Bortolozo, Ausdinir Danilo
    Osorio, Wislei Riuper
    Padilha, Giovana da Silva
    FUEL PROCESSING TECHNOLOGY, 2020, 202 (202)
12345