Polishing of Large-Sized Spiral Bevel Gears Using Elastic Grindstone

被引：0
|
作者：
Kawasaki, K. [1 ]
Tsuji, I. [2 ]
Nukazawa, T. [3 ]
机构：
[1] Niigata Univ, Dept Mech & Prod Engn, Niigata 9502181, Japan
[2] Iwasa Tech Co Ltd, Funabashi, Chiba 2730014, Japan
[3] Niigata Univ, Grad Sch Sci & Technol, Niigata 9502181, Japan
来源：
2016 INTERNATIONAL CONFERENCE ON SUSTAINABLE ENERGY, ENVIRONMENT AND INFORMATION ENGINEERING (SEEIE 2016) | 2016年
关键词：
Polishing; Spiral bevel gears; Surface roughness; Multi-axis control and multi-tasking machine tool; Tool mark; End mill;
D O I：
暂无
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
A manufacturing method of large-sized spiral bevel gears has been developed using a multi-axis control and multi-tasking machine tool in recent years. As a result of trial manufacturing of large-sized spiral bevel gears in a cyclo-palloid system using a multi-axis control and multi-tasking machine tool, and the surfaces roughness and tool mark of the machined gears were compared with those using a special generator, the surfaces were rough and leprous tool mark occurred. In this paper, the tooth surfaces are polished using a PVA elastic grindstone in order to improve the surface roughness and leprous tool mark. As a result, the surface roughness was improved after polishing although the wear and clogging of the elastic grindstone occurred.
引用
收藏
页码：500 / 504
页数：5
相关论文
共 50 条
  • [31] FAST MORPHOLOGY HARDWARE USING LARGE-SIZED STRUCTURING ELEMENT
    KOJIMA, S
    EBISAWA, Y
    MIYAKAWA, T
    [J]. SYSTEMS AND COMPUTERS IN JAPAN, 1994, 25 (06) : 41 - 49
  • [32] Geometric error measurement of spiral bevel gears using a virtual gear model for STEP-NC
    Suh, SH
    Lee, ES
    Kim, HC
    Cho, JH
    [J]. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, 2002, 42 (03): : 335 - 342
  • [33] Theoretical and Experimental Study on Contact Characteristics of Spiral Bevel Gears under Quasi-Static and Large Loading Conditions
    Fu, Yimeng
    Zhuo, Yaobing
    Zhou, Xiaojun
    Wan, Bowen
    Lv, Haoliang
    Wang, Zhe
    [J]. APPLIED SCIENCES-BASEL, 2020, 10 (15):
  • [34] Active control for the suspension of large-sized buses using fuzzy logic
    Yoshimura, T
    Hayashi, N
    [J]. INTERNATIONAL JOURNAL OF SYSTEMS SCIENCE, 1996, 27 (12) : 1243 - 1250
  • [35] Thermal Modeling and Experimental Verification Using Large-sized Stacked Chips
    Kikuchi, Shunichi
    Suwada, Makoto
    Iwakiri, Yoshihisa
    Nakamura, Naoaki
    [J]. 2017 IEEE CPMT SYMPOSIUM JAPAN (ICSJ), 2017, : 95 - 98
  • [36] Active suspension with preview of large-sized buses using fuzzy reasoning
    Li, Q
    Yoshimura, T
    Hino, J
    [J]. INTERNATIONAL JOURNAL OF VEHICLE DESIGN, 1998, 19 (02) : 187 - 198
  • [37] Optimized Growth of Large-Sized LiInSe2 Crystals and the Electric-Elastic Properties
    Jia, Ning
    Wang, Shanpeng
    Gao, Zeliang
    Wu, Qian
    Li, Chunlong
    Zhang, Xixia
    Yu, TongTong
    Lu, Qingming
    Tao, Xutang
    [J]. CRYSTAL GROWTH & DESIGN, 2017, 17 (11) : 5875 - 5880
  • [38] NON-CONTACT MEASUREMENT OF SPIRAL BEVEL GEARS USING THE LASER PROFILER ON THE FIVE-AXIS MACHINE
    Shih, Yi-Pei
    Sheen, Bor-Tyng
    Wu, Wun-Kai
    Wei, Bo-Lin
    [J]. PROCEEDINGS OF ASME 2023 INTERNATIONAL DESIGN ENGINEERING TECHNICAL CONFERENCES AND COMPUTERS AND INFORMATION IN ENGINEERING CONFERENCE, IDETC-CIE2023, VOL 11, 2023,
  • [39] Prediction of churning losses in an industrial gear box with spiral bevel gears using the smoothed particle hydrodynamic method
    Legrady, B.
    Taesch, M.
    Tschirschnitz, G.
    Mieth, C. F.
    [J]. FORSCHUNG IM INGENIEURWESEN-ENGINEERING RESEARCH, 2022, 86 (03): : 379 - 388
  • [40] INTELLIGENT DEFECT DIAGNOSIS OF SPIRAL BEVEL GEARS UNDER DIFFERENT OPERATING CONDITIONS USING ANN AND KNN CLASSIFIERS
    Tayyab, Syed Muhammad
    Pennacchi, Paolo
    Chatterton, Steven
    Asghar, Eram
    [J]. PROCEEDINGS OF ASME 2021 INTERNATIONAL MECHANICAL ENGINEERING CONGRESS AND EXPOSITION (IMECE2021), VOL 7A, 2021,
12345