Polishing of Large-Sized Spiral Bevel Gears Using Elastic Grindstone

被引：0
|
作者：
Kawasaki, K. [1 ]
Tsuji, I. [2 ]
Nukazawa, T. [3 ]
机构：
[1] Niigata Univ, Dept Mech & Prod Engn, Niigata 9502181, Japan
[2] Iwasa Tech Co Ltd, Funabashi, Chiba 2730014, Japan
[3] Niigata Univ, Grad Sch Sci & Technol, Niigata 9502181, Japan
来源：
2016 INTERNATIONAL CONFERENCE ON SUSTAINABLE ENERGY, ENVIRONMENT AND INFORMATION ENGINEERING (SEEIE 2016) | 2016年
关键词：
Polishing; Spiral bevel gears; Surface roughness; Multi-axis control and multi-tasking machine tool; Tool mark; End mill;
D O I：
暂无
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
A manufacturing method of large-sized spiral bevel gears has been developed using a multi-axis control and multi-tasking machine tool in recent years. As a result of trial manufacturing of large-sized spiral bevel gears in a cyclo-palloid system using a multi-axis control and multi-tasking machine tool, and the surfaces roughness and tool mark of the machined gears were compared with those using a special generator, the surfaces were rough and leprous tool mark occurred. In this paper, the tooth surfaces are polished using a PVA elastic grindstone in order to improve the surface roughness and leprous tool mark. As a result, the surface roughness was improved after polishing although the wear and clogging of the elastic grindstone occurred.
引用
收藏
页码：500 / 504
页数：5
相关论文
共 50 条
  • [1] Method for remanufacturing large-sized skew bevel gears using CNC machining center
    Kawasaki, Kazumasa
    Tsuji, Isamu
    Gunbara, Hiroshi
    Houjoh, Haruo
    [J]. MECHANISM AND MACHINE THEORY, 2015, 92 : 213 - 229
  • [2] ANALYTICAL AND EXPERIMENTAL TOOTH CONTACT PATTERN OF LARGE-SIZED SPIRAL BEVEL GEARS IN CYCLO-PALLOID SYSTEM
    Kawasaki, Kazumasa
    Tsuji, Isamu
    [J]. DETC2009: PROCEEDINGS OF THE ASME INTERNATIONAL DESIGN ENGINEERING TECHNICAL CONFERENCES/COMPUTERS AND INFORMATION IN ENGINEERING CONFERENCE, 2010, : 139 - 147
  • [3] Analytical and Experimental Tooth Contact Pattern of Large-Sized Spiral Bevel Gears in Cyclo-palloid System
    Kawasaki, Kazumasa
    Tsuji, Isamu
    [J]. JOURNAL OF MECHANICAL DESIGN, 2010, 132 (04)
  • [4] Fatigue testing of large sized bevel gears
    Virtanen, Erkka
    Kanerva, Mikko
    Szanti, Gabor
    [J]. VDI Berichte, 2023, 2023 (2422): : 897 - 906
  • [5] TOOTH CONTACT ANALYSIS AND MANUFACTURE ON MULTI-TASKING MACHINE OF LARGE-SIZED STRAIGHT BEVEL GEARS
    Kawasaki, Kazumasa
    Tsuji, Isamu
    Gunbara, Hiroshi
    [J]. PROCEEDINGS OF THE ASME INTERNATIONAL DESIGN ENGINEERING TECHNICAL CONFERENCES AND COMPUTERS AND INFORMATION IN ENGINEERING CONFERENCE, 2011, VOL 8, 2012, : 63 - 71
  • [6] Design and Analysis of Spiral Bevel Gears with Large Contact Ratio
    Su, Jinzhan
    Wei, Gang
    Yang, Yu
    Chang, Lehao
    Guo, Jiashun
    [J]. Hsi-An Chiao Tung Ta Hsueh/Journal of Xi'an Jiaotong University, 2021, 55 (03): : 117 - 125
  • [7] Tooth Contact Analysis and Manufacture on Multitasking Machine of Large-Sized Straight Bevel Gears With Equi-Depth Teeth
    Tsuji, Isamu
    Kawasaki, Kazumasa
    Gunbara, Hiroshi
    Houjoh, Haruo
    Matsumura, Shigeki
    [J]. JOURNAL OF MECHANICAL DESIGN, 2013, 135 (03)
  • [8] Kinematics optimization of the polishing process of large-sized ceramic slabs
    Ivo Campione
    Cristiano Fragassa
    Alberto Martini
    [J]. The International Journal of Advanced Manufacturing Technology, 2019, 103 : 1325 - 1336
  • [9] Kinematics optimization of the polishing process of large-sized ceramic slabs
    Campione, Ivo
    Fragassa, Cristiano
    Martini, Alberto
    [J]. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2019, 103 (1-4): : 1325 - 1336
  • [10] Dynamic Model of the Separation of Large-Sized Elastic Structures
    Bakulin, V. N.
    Borzykh, S. V.
    [J]. DOKLADY PHYSICS, 2023, 68 (06) : 190 - 194
12345