Opto-mechanical Design of the 3,6 m Optical Telescope for ARIES

被引：5

作者：

Flebus, Carlo ^{[1
]}

Gabriel, Eric ^{[1
]}

Lambotte, Sebastien ^{[1
]}

Ninane, Nathalie ^{[2
]}

Pierard, Maxime ^{[1
]}

Rausin, Frederic ^{[1
]}

Schumacher, Jean-Marc ^{[1
]}

机构：

[1] AMOS Sa, Liege Sci Pk, B-4031 Liege, Belgium

[2] CSL, B-4031 Liege, Belgium

来源：

GROUND-BASED AND AIRBORNE TELESCOPES II, PTS 1-3 | 2008年 / 7012卷

关键词：

telescope design; opto-mechanical design; active optics; mirror supports;

D O I：

10.1117/12.787888

中图分类号：

P1 [天文学];

学科分类号：

0704 ;

摘要：

AMOS SA has been awarded of the contract for the design, manufacturing, assembly, tests and on site installation (Nainital, Devasthal site at 2540 mm attitude) of the 3,6 m Optical Telescope for ARIES (Aryabhatta Research Institute of Observational Sciences), Nainital (India). This paper describes the opto-mechanical design of this telescope and presents the solutions adopted by AMOS to meet the specific requirements. The telescope has a Ritchey-Chretien optical configuration with a Cassegrain focus equipped with one axial port and two side ports. The primary mirror is a meniscus active mirror.

引用

页数：12

共 50 条

[41] Opto-mechanical Design of Monocrystalline Silicon Mirror for a Reflective Imaging Optical System
Liu, Xiaofeng
Zhang, Xin
Tian, Fuxiang
CURRENT OPTICS AND PHOTONICS, 2022, 6 (03) : 236 - 243
[42] The Canarias InfraRed Camera Experiment (CIRCE): Optical and opto-mechanical design and manufacture
Edwards, M. L.
Eikenberry, S. S.
Marin-Franch, A.
Charcos-Llorens, M.
Rodgers, M.
Julian, J.
Raines, N.
Packham, C.
GROUND-BASED AND AIRBORNE INSTRUMENTATION FOR ASTRONOMY, PTS 1- 3, 2006, 6269
[43] Design of the opto-mechanical mounts of the ESPRESSO Spectrograph
Santana Tschudi, Samuel
Fragoso, A.
Amate, M.
Rebolo, R.
Megevand, D.
Zerbi, F. M.
Pepe, F.
ADVANCES IN OPTICAL AND MECHANICAL TECHNOLOGIES FOR TELESCOPES AND INSTRUMENTATION, 2014, 9151
[44] Optical, Mechanical, and Opto-Mechanical Switching of Anchored Dithioazobenzene Bridges
Turansky, Robert
Konopka, Martin
Doltsinis, Nikos L.
Stich, Ivan
Marx, Dominik
CHEMPHYSCHEM, 2010, 11 (02) : 345 - 348
[45] Opto-mechanical performances of slewing mirror space telescope for GRB detection
Ahn, Ki-Beom
Jeong, Soomin
Kim, Sug-Whan
Nam, Jiwoo
Chen, Pisin
Choi, Hyeunseok
Choi, Yeon Ju
Grossan, Bruce
Herman, Indra
Huang, Ming-Huey A.
Jung, Aera
Kim, Jieun
Kim, Yewon
Lee, Jik
Lim, Heuijin
Linder, Eric
Liu, Tsung-Che
Min, Kyoungwook
Na, Gowoon
Nam, Koo Hyun
Panasyuk, Michel I.
Smoot, George
Suh, Young D.
Svertilov, Sergey
Vedenkin, Nikolay
Yashin, Ivan
Cho, Myungheh
Park, Il H.
OPTICAL DESIGN AND ENGINEERING IV, 2011, 8167
[46] The ASTRI SST-2M prototype for the Cherenkov Telescope Array: opto-mechanical test results
Canestrari, Rodolfo
Giro, Enrico
Antolini, Elisa
Bonnoli, Giacomo
Cascone, Enrico
La Palombara, Nicola
Leto, Giuseppe
Pareschi, Giovanni
Scuderi, Salvo
Stringhetti, Luca
Tancia, Claudio
Tosti, Gino
OPTICS FOR EUV, X-RAY, AND GAMMA-RAY ASTRONOMY VII, 2015, 9603
[47] NRCIM integrated opto-mechanical analysis toolset for the Thirty Meter Telescope
Roberts, Scott
INTEGRATED MODELING OF COMPLEX OPTOMECHANICAL SYSTEMS, 2011, 8336
[48] Combined Opto-mechanical analysis for modern optical instruments
Heijmans, J.
Mueller, M.
Holzloehner, R.
MODELING, SYSTEMS ENGINEERING, AND PROJECT MANAGEMENT FOR ASTRONOMY VIII, 2018, 10705
[49] FRIDA Integral Field Unit Opto-mechanical Design
Cuevas, Salvador
Eikenberry, Stephen S.
Bringas, Vicente
Corrales, Adi
Espejo, Carlos
Lucero, Diana
Rodriguez, Alberto
Sanchez, Beatriz
Uribe, Jorge
MODERN TECHNOLOGIES IN SPACE-AND GROUND-BASED TELESCOPES AND INSTRUMENTATION II, 2012, 8450
[50] Design guidelines for thermal stability in opto-mechanical instruments
Giesen, P
Folgering, E
OPTOMECHANICS 2003, 2003, 5176 : 126 - 134

← 1 2 3 4 5 →