Opto-mechanical Design of the 3,6 m Optical Telescope for ARIES

被引：5
|
作者：
Flebus, Carlo [1 ]
Gabriel, Eric [1 ]
Lambotte, Sebastien [1 ]
Ninane, Nathalie [2 ]
Pierard, Maxime [1 ]
Rausin, Frederic [1 ]
Schumacher, Jean-Marc [1 ]
机构：
[1] AMOS Sa, Liege Sci Pk, B-4031 Liege, Belgium
[2] CSL, B-4031 Liege, Belgium
来源：
GROUND-BASED AND AIRBORNE TELESCOPES II, PTS 1-3 | 2008年 / 7012卷
关键词：
telescope design; opto-mechanical design; active optics; mirror supports;
D O I：
10.1117/12.787888
中图分类号：
P1 [天文学];
学科分类号：
0704 ;
摘要：
AMOS SA has been awarded of the contract for the design, manufacturing, assembly, tests and on site installation (Nainital, Devasthal site at 2540 mm attitude) of the 3,6 m Optical Telescope for ARIES (Aryabhatta Research Institute of Observational Sciences), Nainital (India). This paper describes the opto-mechanical design of this telescope and presents the solutions adopted by AMOS to meet the specific requirements. The telescope has a Ritchey-Chretien optical configuration with a Cassegrain focus equipped with one axial port and two side ports. The primary mirror is a meniscus active mirror.
引用
收藏
页数：12
相关论文
共 50 条
  • [1] Optical and opto-mechanical design of the PRIMA telescope
    Rodgers, J. Michael
    McGuire, James P.
    Calvet, Robert J.
    UV/OPTICAL/IR SPACE TELESCOPES AND INSTRUMENTS: INNOVATIVE TECHNOLOGIES AND CONCEPTS XI, 2023, 12676
  • [2] The 3,6 m Optical Telescope for ARIES: the control system
    Gabriel, Eric
    Bastin, Christian
    Pierard, Maxime
    SOFTWARE AND CYBERINFRASTRUCTURE FOR ASTRONOMY II, 2012, 8451
  • [3] The PMAS telescope module: Opto-mechanical design and manufacture
    Roth, KM
    Laux, U
    Kelz, A
    Dionies, F
    SPECIALIZED OPTICAL DEVELOPMENTS IN ASTRONOMY, 2003, 4842 : 183 - 194
  • [4] VISTA Telescope Opto-Mechanical Integration
    Jeffers, Paul
    Henry, David
    GROUND-BASED AND AIRBORNE TELESCOPES III, 2010, 7733
  • [5] Optical and opto-mechanical design of spectrometers for PRIMA
    Rodgers, J. Michael
    McGuire, James P.
    Tieu, Vincent
    Calvet, Robert J.
    Bradford, Charles M.
    UV/OPTICAL/IR SPACE TELESCOPES AND INSTRUMENTS: INNOVATIVE TECHNOLOGIES AND CONCEPTS XI, 2023, 12676
  • [6] DOTIFS: Spectrograph optical and opto-mechanical design
    Chung, Haeun
    Ramaprakash, A. N.
    Khodade, Pravin
    Modi, Deepa
    Rajarshi, Chaitanya V.
    Chattopadhyay, Sabyasachi
    Chordia, Pravin A.
    Joshi, Vishal
    Hong, Sungwook E.
    Omar, Amitesh
    Ravindranath, Swara
    Park, Yong-Sun
    Park, Changbom
    GROUND-BASED AND AIRBORNE INSTRUMENTATION FOR ASTRONOMY VII, 2018, 10702
  • [7] The opto-mechanical design of the Antarctic telescope ICE-T
    Strassmeier, Klaus G.
    DiVarano, Igor
    Woche, Manfred
    Kaercher, Hans J.
    Eisentraeger, Peter
    GROUND-BASED AND AIRBORNE TELESCOPES III, 2010, 7733
  • [8] Opto-mechanical Design and Gravity-deformation Analysis on Optical Telescope in Laser Communication System
    Fu Sen
    Du Jindan
    Song Yiwei
    Gao Tianyu
    Zhang Daqing
    Wang Yongzhi
    LIDAR IMAGING DETECTION AND TARGET RECOGNITION 2017, 2017, 10605
  • [9] Small-ELF Telescope - opto-mechanical design and application of tensegrity
    Zhou, Ye
    Lee, T. K.
    Kuhn, J. R.
    Cunnyngham, I
    Jefferies, S.
    Langlois, M.
    Lewis, K.
    Lodieu, N.
    Moretto, G.
    Rebolo, R.
    Ritter, J.
    Swindle, R.
    Salata, S.
    Rios, M.
    Diego, R.
    GROUND-BASED AND AIRBORNE TELESCOPES IX, 2022, 12182
  • [10] CARMENES. II: Optical and Opto-Mechanical Design
    Seifert, W.
    Sanchez Carrasco, M. A.
    Xu, W.
    Cardenas, M. C.
    Sanchez-Blancod, E.
    Becerril, S.
    Feiz, C.
    Ramon, A.
    Dreizler, S.
    Rohde, P.
    Quirrenbach, A.
    Amado, P. J.
    Ribas, I.
    Reiners, A.
    Mandel, H.
    Caballero, J. A.
    GROUND-BASED AND AIRBORNE INSTRUMENTATION FOR ASTRONOMY IV, 2012, 8446
12345