The investigation of AlGaN/GaN HEMT failure mechanisms under different temperature conditions

被引:0
|
作者
Guo, Chunsheng [1 ]
Ren, Yunxiang [1 ]
Gao, Li [2 ]
Zhu, Hui [1 ]
Li, Shiwei [1 ]
机构
[1] Beijing Univ Technol, Coll Elect Informat & Control Engn, Beijing 100124, Peoples R China
[2] China Elect Standardizat Inst, Beijing 100176, Peoples R China
关键词
AlGaN/GaN HEMT; the Schottky barrier; junction temperature;
D O I
暂无
中图分类号
TP [自动化技术、计算机技术];
学科分类号
0812 ;
摘要
To explore degradation law and failure mechanisms of AlGaN/GaN HEMT under different temperature conditions, the step-temperature stress experiments are carried out. The results show that the drain-source current decreases with the aging time when the junction temperature range from 139 degrees to 200 degrees; while the drain-source current increases with the aging time when the junction temperature range from 200 degrees to 352 degrees. When the junction temperature is less than 200 degrees, the AlGaN ionized donor atoms cause the Schottky barrier height of the AlGaN/GaN HEMT device to rise; and when the junction temperature is higher than 200 degrees, the diffusion of impurities oxygen in surface causes the Schottky barrier height of the AlGaN/GaN HEMT device to fall. The barrier height can affect the threshold voltage which leads to the change of drain-source current. Therefore, the degradation of the drain-source current is caused by the change of the Schottky barrier height.
引用
收藏
页码:995 / 1000
页数:6
相关论文
共 50 条
  • [21] The temperature characteristics of AlGaN/GaN double heterostructure HEMT's
    Lu, CZ
    Feng, SW
    Wang, DF
    Zhu, XD
    Fan, ZF
    Morkoc, H
    2004: 7TH INTERNATIONAL CONFERENCE ON SOLID-STATE AND INTEGRATED CIRCUITS TECHNOLOGY, VOLS 1- 3, PROCEEDINGS, 2004, : 2284 - 2286
  • [22] Analytical Approach for High Temperature Analysis of AlGaN/GaN HEMT
    Parvesh
    Kaur, Ravneet
    Pandey, Sujata
    Haldar, Subhasis
    Gupta, Mridula
    Gupta, R. S.
    INTERNATIONAL CONFERENCE ON RECENT ADVANCES IN MICROWAVE THEORY AND APPLICATIONS, PROCEEDINGS, 2008, : 725 - +
  • [23] Total ionizing dose effect of enhanced AlGaN/GaN HEMT devices under different bias
    Qiu Y.
    Guo F.
    Yin Y.
    Zhang P.
    Zhou X.
    He Jishu/Nuclear Techniques, 2023, 46 (11):
  • [24] Numerical investigation on AlGaN/GaN short channel HEMT with AlGaN/InGaN/AlGaN quantum well plate
    Wang, Zeheng
    Cao, Jun
    Sun, Ruize
    Wang, Fangzhou
    Yao, Yuanzhe
    SUPERLATTICES AND MICROSTRUCTURES, 2018, 120 : 753 - 758
  • [25] Gate leakage mechanisms of the AlGaN/GaN HEMT with fluorinated graphene passivation
    Ding, Xiaoyu
    Song, Liang
    Yu, Guohao
    Cai, Yong
    Sun, Yuhua
    Zhang, Bingliang
    Du, Zhongkai
    Zeng, Zhongming
    Zhang, Xinping
    Zhang, Baoshun
    MATERIALS SCIENCE IN SEMICONDUCTOR PROCESSING, 2023, 162
  • [26] Reliability and failure analysis of AlGaN/GaN HEMT with NiPtAu and PtAu gate
    Dammann, M.
    Brueckner, P.
    Driad, R.
    Krause, S.
    Albahrani, S. A.
    Weber, B.
    Baeumler, M.
    Konstanzer, H.
    Mikulla, M.
    Simon-Najasek, M.
    Huebner, S.
    Graff, A.
    MICROELECTRONICS RELIABILITY, 2025, 168
  • [27] Improved temperature model of AlGaN/GaN HEMT and device characteristics at variant temperature
    Islam, S. K.
    Huq, H. F.
    INTERNATIONAL JOURNAL OF ELECTRONICS, 2007, 94 (12) : 1099 - 1108
  • [28] 2DEG transport properties over temperature for AlGaN/GaN HEMT and AlGaN/InGaN/GaN pHEMT
    Khan, Md. Abdul Kaium
    Alim, Mohammad Abdul
    Gaquiere, Christophe
    MICROELECTRONIC ENGINEERING, 2021, 238
  • [29] Failure mode analysis of GaN-HEMT under high temperature operation
    Kurachi, Yasuyo
    Yamamoto, Hiroshi
    Nose, Yukinori
    Shimizu, Satoshi
    Tateno, Yasunori
    Yonemura, Takumi
    Furukawa, Masato
    2018 IEEE INTERNATIONAL RELIABILITY PHYSICS SYMPOSIUM (IRPS), 2018,
  • [30] TCAD Investigation of AlGaN/AlN/GaN HEMT for Hydrogen Sensing Applications
    Kumaran, Renuka
    Rahul, J.
    Varghese, Arathy
    Rajan, Lintu
    8TH IEEE ELECTRON DEVICES TECHNOLOGY & MANUFACTURING CONFERENCE, EDTM 2024, 2024, : 325 - 327