3D contaminant transport by GFEM with hexahedral elements

被引：3

作者：

Romao, Estaner Claro ^{[1
]}

Mendes de Moura, Luiz Felipe ^{[2
]}

机构：

[1] Univ Fed Itajuba, Itabira, MG, Brazil

[2] Univ Estadual Campinas, Fac Mech Engn, Thermal & Fluids Engn Dept, Campinas, SP, Brazil

来源：

INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER | 2013年 / 42卷

关键词：

GFEM; Hexahedral elements; Error norms; Convective problems; EQUATION; GALERKIN;

D O I：

10.1016/j.icheatmasstransfer.2012.10.016

中图分类号：

O414.1 [热力学];

学科分类号：

摘要：

This work aims to apply the GFEM (Galerkin Finite Element Method), with hexahedral elements in concentration transport problems in a three-dimensional domain. Since these problems are highly convective in nature, a study of the GFEM with 8 and 27-node hexahedron is performed. For such, an application with an analytical solution is performed by examining the norms L-2 and L-infinity from the error in the numerical solution; especially considering the variation of the velocity components, and the geometry of the proposal. Finally, the application involved the transport of an ammonia concentration through a tubulation containing holes caused by ruptures, which allows for inward air flow; thus, in this study, the influence of the variation of hole quantities, the maximum drainage velocity, and the geometry employed are analyzed. (C) 2012 Elsevier Ltd. All rights reserved.

引用

页码：43 / 50

页数：8

共 50 条

[41] Mapping-Based 3D Hexahedral Finite Element Mesh Generation Method
REN Bo
WuhanUniversityJournalofNaturalSciences, 2007, (02) : 255 - 259
[42] STRUCTURE ANALYSIS WITH 3D HEXAHEDRAL MESHES GENERATED BY A LABEL-DRIVEN SUBDIVISION
Liu, Xuewu
Zhong, Zhenyuan
Liu, Bo
Ling, Xiaoming
2020 5TH INTERNATIONAL CONFERENCE ON MECHANICAL, CONTROL AND COMPUTER ENGINEERING (ICMCCE 2020), 2020, : 2396 - 2403
[43] A 3D unstructured Navier-Stokes solver with multigrid on adaptive hexahedral meshes
Van de Velde, O
Lacor, C
Alavilli, P
Hirsch, C
COMPUTATIONAL FLUID DYNAMICS '98, VOL 1, PARTS 1 AND 2, 1998, : 675 - 680
[44] Key technologies of 3D FEM analysis system for bulk forming with hexahedral mesh
Wang, Zhong-Lei
Zhao, Guo-Qun
Huang, Li-Li
Ma, Xin-Wu
Cailiao Kexue yu Gongyi/Material Science and Technology, 2010, 18 (04): : 509 - 513
[45] Thermal Transport in 3D Nanostructures
Zhan, Haifei
Nie, Yihan
Chen, Yongnan
Bell, John M.
Gu, Yuantong
ADVANCED FUNCTIONAL MATERIALS, 2020, 30 (08)
[46] 3D geological model to assess the fate of contaminant transport in groundwater: the case study of Maruzzella Landfill (Caserta, Italy)
Ruberti, Daniela
Buffardi, Carla
Vigliotti, Marco
RENDICONTI ONLINE DELLA SOCIETA GEOLOGICA ITALIANA, 2023, 59 : 131 - 138
[47] RKPM-based smoothed GFEM with Kronecker-Delta property for 2D and 3D solid problems
Jinsong Tang
Linfang Qian
Longmiao Chen
Acta Mechanica, 2023, 234 : 471 - 490
[48] RKPM-based smoothed GFEM with Kronecker-Delta property for 2D and 3D solid problems
Tang, Jinsong
Qian, Linfang
Chen, Longmiao
ACTA MECHANICA, 2023, 234 (02) : 471 - 490
[49] 3D hydraulic objects for groundwater how and contaminant migration modelling
Boisson, M
Cabal, A
Guinot, V
HYDROINFORMATICS '98, VOLS 1 AND 2, 1998, : 561 - 565
[50] 3D volume modeling for contaminant extent and source term definition
Hicks, J
Fox, T
Naymik, T
Gupta, N
FIRST INTERNATIONAL CONFERENCE ON REMEDIATION OF CHLORINATED AND RECALCITRANT COMPOUNDS, VOL 1: RISK, RESOURCE, AND REGULATORY ISSUES, 1998, : 127 - 132

← 1 2 3 4 5 →