Dynamic stability of the process of turning nickel superalloys using a toolholder produced by selective laser sintering

被引：0
|
作者：
Gutnichenko, O. A. [1 ]
Bushlya, V. M. [1 ]
Zhou, J. M. [1 ]
Avdovic, P. [2 ]
Simmons, U. [2 ]
Stahl, J. -E. [1 ]
机构：
[1] Lund Univ, SE-22100 Lund, Sweden
[2] Siemens Turbomachinery AB, S-61231 Finspang, Sweden
来源：
JOURNAL OF SUPERHARD MATERIALS | 2013年 / 35卷 / 06期
关键词：
dynamic stability; turning; Inconel; 718; tool wear; wavelet analysis; 0-1; test; INCONEL; 718; MACHINABILITY; ALUMINA;
D O I：
10.3103/S1063457613060075
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
The paper presents the results of a comparative analysis of dynamic stability of SiC whisker reinforced alumina tools used in a conventional and prototype toolholders when turning a nickel-based superalloy Inconel 718. The use of the prototype toolholder with a cellular spatial structure is shown to significantly suppress vibrations during the machining operation and stabilize the cutting process within the cutting speed range between 200 and 500 m/min. Considering the identical nature of tool wear rate and the analytical ellaborations regarding the process dynamics, the above-mentioned benefits are related to damping properties of the proposed toolholder.
引用
收藏
页码：391 / 398
页数：8
相关论文
共 50 条
  • [31] Interruption of the selective laser sintering process and resulting options
    Becker M.
    Pfeffer S.
    Springer P.
    Cardenas M.
    Refle O.
    WT Werkstattstechnik, 2021, 111 (06): : 378 - 384
  • [32] Computational Framework to Model the Selective Laser Sintering Process
    Castro, Joao
    Nobrega, Joao Miguel
    Costa, Ricardo
    MATERIALS, 2024, 17 (08)
  • [33] Characterizing process window for microscale selective laser sintering 
    Behera, Dipankar
    Liao, Aaron
    Cullinan, Michael A.
    MANUFACTURING LETTERS, 2023, 37 : 39 - 44
  • [34] A Statistical Study of Surface Roughness for Polyamide 12 Parts Produced Using Selective Laser Sintering
    Petzold, S.
    Klett, J.
    Osswald, T. A.
    INTERNATIONAL POLYMER PROCESSING, 2020, 35 (02) : 126 - 138
  • [35] Manufacture of passive dynamic ankle-foot orthoses using selective laser sintering
    Faustini, Mario C.
    Neptune, Richard R.
    Crawford, Richard H.
    Stanhope, Steven J.
    IEEE TRANSACTIONS ON BIOMEDICAL ENGINEERING, 2008, 55 (02) : 784 - 790
  • [36] Impact of an Aluminization Process on the Microstructure and Texture of Samples of Haynes 282 Nickel Alloy Produced Using the Direct Metal Laser Sintering (DMLS) Technique
    Mizera, Jaroslaw
    Adamczyk-Cieslak, Boguslawa
    Maj, Piotr
    Wisniewski, Pawel
    Drajewicz, Marcin
    Sitek, Ryszard
    MATERIALS, 2023, 16 (14)
  • [37] Improving the dynamic stability of a workpiece dominated turning process using an adaptronic tool holder
    Achim Fischer
    Peter Eberhard
    Theoretical & Applied Mechanics Letters, 2013, 3 (01) : 63 - 70
  • [38] Improving the dynamic stability of a workpiece dominated turning process using an adaptronic tool holder
    Fischer, Achim
    Eberhard, Peter
    THEORETICAL AND APPLIED MECHANICS LETTERS, 2013, 3 (01) : 013008
  • [39] Routes to plastic models and prototypes using the SLS(R) selective laser sintering process
    Seitz, S
    vandeCrommert, S
    Esser, KJ
    McAlea, K
    RAPID PROTOTYPING AND FLEXIBLE MANUFACTURING, 1997, 3102 : 106 - 111
  • [40] Integration of Acceleration Sensors in Polymer Parts produced with Selective Laser Sintering
    Stoll, P.
    Schmid, M.
    von Ohr, M. Schmock
    Wegener, K.
    PROCEEDINGS OF THE 35TH INTERNATIONAL CONFERENCE OF THE POLYMER PROCESSING SOCIETY (PPS-35), 2020, 2205
12345