Estimating the Reduction of Radiated Emissions From Microstrip Components Using Network Analyzer With a Bulk Current Injection Probe

被引：7
|
作者：
Ho, Cheng-Yu [1 ]
Chen, Kai-Syaun [1 ]
Horng, Tzyy-Sheng [1 ]
机构：
[1] Natl Sun Yat Sen Univ, Dept Elect Engn, Kaohsiung 80424, Taiwan
来源：
IEEE MICROWAVE AND WIRELESS COMPONENTS LETTERS | 2013年 / 23卷 / 02期
关键词：
Bulk current injection (BCI) probe; common-mode current; microstrip bandpass filter (BPF); network analyzer; radiated emissions; COMMON-MODE; EMI;
D O I：
10.1109/LMWC.2012.2236887
中图分类号：
TM [电工技术]; TN [电子技术、通信技术];
学科分类号：
0808 ; 0809 ;
摘要：
This work presents a novel measurement method using a network analyzer with a bulk current injection (BCI) probe to measure the common-mode conversion coefficient of microstrip components in an RF/microwave circuit. Based on the proposed measurement method, far-field radiated emissions from microstrip components are obtained, which closely corresponds to measurements in a fully anechoic chamber. The proposed method also estimates the radiated emission reduction by miniaturizing the physical size of microstrip bandpass filters (BPFs). Full-wave electromagnetic simulation further demonstrates the effectiveness of the measurement method.
引用
收藏
页码：108 / 110
页数：3
相关论文
共 21 条
  • [1] ESTIMATING THE REDUCTION OF RADIATED EMISSIONS FROM TFT-LCD PANEL USING NETWORK ANALYZER WITH A BULK CURRENT INJECTION PROBE
    Ho, Cheng-Yu
    Chen, Kai-Syuan
    Horng, Tzyy-Sheng
    Wu, Jian-Ming
    [J]. PROGRESS IN ELECTROMAGNETICS RESEARCH-PIER, 2013, 140 : 181 - 197
  • [2] ESTIMATING RADIATED EMISSION REDUCTION FROM PRINTED CIRCUIT BOARD USING VECTOR NETWORK ANALYZER WITH A BULK CURRENT INJECTION PROBE
    Ho, Cheng-Yu
    Chen, Kai-Syuan
    Horng, Tzyy-Sheng
    [J]. PROGRESS IN ELECTROMAGNETICS RESEARCH-PIER, 2013, 135 : 1 - 16
  • [3] Prediction of common-mode radiated emission from PCB using vector network analyzer with a bulk injection current probe
    Ho, C. -Y.
    Chen, K. -S.
    Horng, T. -S.
    [J]. JOURNAL OF ELECTROMAGNETIC WAVES AND APPLICATIONS, 2012, 26 (16) : 2121 - 2129
  • [4] Estimation of Radiated Emissions from Microstrip PCB using Neural Network Model
    Sayegh, Ahmed Mohammed
    Jenu, Mohd Zarar Mohd
    [J]. 2016 IEEE ASIA-PACIFIC CONFERENCE ON APPLIED ELECTROMAGNETICS (APACE), 2016,
  • [5] Prediction of radiated emissions from microstrip components for RF/microwave circuits using measurement of common-mode current
    Ho, Cheng-Yu
    Chen, Kai-Syuan
    Horng, Tzyy-Sheng
    Wu, Jian-Ming
    Huang, Chien-Hsiang
    [J]. JOURNAL OF ELECTROMAGNETIC WAVES AND APPLICATIONS, 2013, 27 (18) : 2355 - 2365
  • [6] Estimating Radiated Emissions from Microstrip Transmission Lines Based on the Imbalance Model
    Al-Rubaye, Hasan
    Pararajasingam, Kuganesan
    Kane, Mamadou
    [J]. 2012 IEEE ELECTRICAL DESIGN OF ADVANCED PACKAGING AND SYSTEMS SYMPOSIUM (EDAPS), 2012, : 93 - 96
  • [7] Estimating The Radiated Emissions And Received Waveforms From Coupled Microstrip Lines With Unipolar Signaling
    Norte, David
    [J]. 2014 IEEE INTERNATIONAL SYMPOSIUM ON ELECTROMAGNETIC COMPATIBILITY (EMC), 2014, : 103 - 108
  • [8] Reduction of radiated emissions from semiconductor by using absorbent materials
    Kim, SH
    Lee, SB
    Ouh, KI
    Rim, CB
    Moon, KS
    Yoon, HG
    Moon, TJ
    [J]. 2000 IEEE INTERNATIONAL SYMPOSIUM ON ELECTROMAGNETIC COMPATIBILITY, VOLS 1 AND 2, SYMPOSIUM RECORD, 2000, : 153 - 156
  • [9] Simulation of radiated narrow band electromagnetic interference for components in the Automotive industry. (Bulk Current Injection)
    Kunkel, H
    Klezar, S
    [J]. PROCEEDINGS OF THE 8TH INTERNATIONAL CONFERENCE ON ELECTROMAGNETIC INTERFERENCE AND COMPATIBILITY, 2003, : 245 - 248
  • [10] Study on reduction in radiated emissions from PCB using test LSI
    Haga, S
    Nakano, K
    Sudo, T
    Hashimoto, O
    [J]. MICROWAVE AND OPTICAL TECHNOLOGY LETTERS, 2003, 36 (04) : 238 - 242
123