Evaluation of Maximum Inclusion Size and Fatigue Limit for High Strength Steel in Rotating Rending

被引：0

作者：

Wang, Ping ^{[1
]}

Li, Wei ^{[2
]}

Wang, Dongming ^{[1
]}

机构：

[1] Shandong Acad Sci, Inst Oceanog Instrumentat, Shandong Prov Key Lab Ocean Environm Monitoring T, Qingdao 266001, Peoples R China

[2] Beijing Inst Technol, Sch Mech & Vehicular Engn, Beijing 100081, Peoples R China

来源：

ADVANCED COMPOSITE MATERIALS, PTS 1-3 | 2012年 / 482-484卷

关键词：

Rotating bending; Very high cycle fatigue; Maximum inclusion size; Fatigue limit;

D O I：

10.4028/www.scientific.net/AMR.482-484.1622

中图分类号：

TB33 [复合材料];

学科分类号：

摘要：

Based on the observation of fracture surfaces for a low-alloy high strength steel under rotating bending in very high cycle regime, a newly defined method about inspection plane under rotating bending was developed in this paper. By using the statistics of extreme values (SEV) method, the maximum sizes of inclusion and FGA corresponding to the control volume of specimen are evaluated to be about 41.38 mu m and 58.51 mu m on the basis of this newly defined inspection plane, and the corresponding values of fatigue limit are evaluated to be 690 MPa and 654 MPa, respectively. It should be noted that fatigue design based on former involves a certain amount of risk in very high cycle regime.

引用

下载

页码：1622 / +

页数：2

共 50 条

[31] Effect of inclusion size on the high cycle fatigue strength and failure mode of a high V alloyed powder metallurgy tool steel
Jun Yao
International Journal of Minerals,Metallurgy and Materials, 2012, 19 (07) : 608 - 614
[32] Effect of inclusion size on the high cycle fatigue strength and failure mode of a high V alloyed powder metallurgy tool steel
Jun Yao
Xuan-hui Qu
Xin-bo He
Lin Zhang
International Journal of Minerals, Metallurgy, and Materials, 2012, 19 : 608 - 614
[33] Notch size effects in the fatigue limit of steel
Makkonen, M
INTERNATIONAL JOURNAL OF FATIGUE, 2003, 25 (01) : 17 - 26
[34] Statistical size effect in the fatigue limit of steel
Makkonen, M
INTERNATIONAL JOURNAL OF FATIGUE, 2001, 23 (05) : 395 - 402
[35] Increasing the fatigue limit of a high-strength bearing steel by thermomechanical treatment
Kerscher, Eberhard
Lang, Karl-Heinz
Loehe, Detlef
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2008, 483-84 : 415 - 417
[36] The fatigue endurance limit of a high strength CrNi steel in a fretting dominated regime
Christiner, Thomas
Reiser, Johannes
Godor, Istvan
Eichlseder, Wilfried
Trieb, Franz
Stuehlinger, Rene
TRIBOLOGY INTERNATIONAL, 2013, 59 : 97 - 103
[37] Inclusion Size Distribution and Endurance Limit of a Hard Steel
Hubert Bomas
Peter Mayr
Thomas Linkewitz
Extremes, 1999, 2 (2) : 149 - 164
[38] Effects of inclusion types on the high-cycle fatigue properties of high-strength steel
Wang, P.
Wang, B.
Liu, Y.
Zhang, P.
Luan, Y. K.
Li, D. Z.
Zhang, Z. F.
SCRIPTA MATERIALIA, 2022, 206
[39] On the critical inclusion size of high strength steels under ultra-high cycle fatigue
Yang, Z. G.
Zhang, J. M.
Li, S. X.
Li, G. Y.
Wang, Q. Y.
Hui, W. J.
Weng, Y. Q.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2006, 427 (1-2): : 167 - 174
[40] HIGH-STRENGTH AND HIGH-FATIGUE LIMIT ZINC GALVANIZED STEEL CORD FOR ACSR
AIHARA, K
SUDO, C
TSUKAMOTO, T
NISHIMURA, S
WIRE JOURNAL INTERNATIONAL, 1983, 16 (04): : 50 - &

← 1 2 3 4 5 →