Nonlinear finite element analysis of stresses and deformations beneath rigid footings

被引:6
|
作者
Bose, SK
Das, SC
机构
[1] Department of Civil Engineering, Jadavpur University
关键词
D O I
10.1016/S0045-7949(96)00199-X
中图分类号
TP39 [计算机的应用];
学科分类号
081203 ; 0835 ;
摘要
Nonlinear finite element analysis was carried out to investigate the stress distribution and load-settlement behaviour of uniformly loaded circular footings of absolute rigidity and absolute flexibility. An absolutely rigid footing was modelled by simulating the footing as a rigid body undergoing equal vertical displacements at the contact points. The nonlinearity of the stress-strain curve of soil was taken into account by adopting a ''piecewise'' linear model. A hyperbolic stress-strain relationship of the soil was assumed, and Mohr-Coulomb yield criterion was chosen for analysis. An analysis was carried out under conditions simulating the experimental setup of the model footing tests, performed on two different types of soil media. Theoretical observations were compared with experimental ones and good agreement between the above two was found. Thus, reasonable predictions of the effect of relative rigidity of footing in the nonlinear range of soil mass could be obtained and a set of conclusions are arrived at from the present investigation. Copyright (C) 1997 Elsevier Science Ltd.
引用
收藏
页码:487 / 492
页数:6
相关论文
共 50 条
  • [31] An analytical solution for the settlement of encased stone columns beneath rigid footings
    Castro, Jorge
    Justo, Jon
    Miranda, Marina
    GEOTEXTILES AND GEOMEMBRANES, 2024, 52 (04) : 451 - 464
  • [32] Buried footings in random soils: comparison of limit analysis and finite element analysis
    Li, J. H.
    Cassidy, M. J.
    Tian, Y.
    Huang, J.
    Lyamin, A. V.
    Uzielli, M.
    GEORISK-ASSESSMENT AND MANAGEMENT OF RISK FOR ENGINEERED SYSTEMS AND GEOHAZARDS, 2016, 10 (01) : 55 - 65
  • [33] FINITE-ELEMENT ANALYSIS OF LINEAR AND NONLINEAR PLANAR DEFORMATIONS OF ELASTIC INITIALLY CURVED BEAMS
    IBRAHIMBEGOVIC, A
    FREY, F
    INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN ENGINEERING, 1993, 36 (19) : 3239 - 3258
  • [34] Seismic bearing capacity of skirted footings using finite element analysis
    Department of Civil Engineering, NIT Srinagar, Srinagar
    190006, India
    不详
    208016, India
    Geomach. Eng., 2024, 1 (13-26):
  • [35] Finite element analysis for fretting contacting stresses
    Liu, Jun
    Liu, Daoxin
    Liu, Yuanyong
    Tang, Changbin
    Jixie Qiandu/Journal of Mechanical Strength, 2005, 27 (04): : 504 - 509
  • [36] Finite element analysis of thermoelastoplastic stresses in composites
    Kwon, Y.W.
    European Journal of Mechanical and Environmental Engineering, 1992, 37 (02): : 83 - 88
  • [37] FINITE ELEMENT ANALYSIS OF RESIDUAL STRESSES IN MACHINING
    Rizzuti, S.
    Umbrello, D.
    Filice, L.
    Settineri, L.
    INTERNATIONAL JOURNAL OF MATERIAL FORMING, 2010, 3 : 431 - 434
  • [38] Finite element analysis of residual stresses in machining
    S. Rizzuti
    D. Umbrello
    L. Filice
    L. Settineri
    International Journal of Material Forming, 2010, 3 : 431 - 434
  • [39] Nonlinear finite element calculations of residual stresses in dislocated crystals
    Maciejewski, G
    Dluzewski, P
    COMPUTATIONAL MATERIALS SCIENCE, 2004, 30 (1-2) : 44 - 49
  • [40] Analysis of rigid pavement by using finite element
    Public Works Dept., Faculty of Engg., Mansoura University, Mansoura, Egypt
    不详
    AEJ Alexandria Eng J, 2008, 6 (557-562): : 557 - 562