Effect of Pharmaceutical Wastes Usage as Partial Replacement of Cement on the Durability of High-Performance Concrete

被引:1
|
作者
Aissa, Talah [1 ]
Rachid, Belaid [1 ]
Kharchi, Fattoum [1 ]
机构
[1] Univ Sci & Technol, Bp32 BabEzzouar, Algiers 16111, Algeria
关键词
ash; pharmaceutical wastes; durability; concrete; STRENGTH;
D O I
10.1016/j.prostr.2018.12.036
中图分类号
TH [机械、仪表工业];
学科分类号
0802 ;
摘要
This paper reports an experimental study of the influence of ash produced from incinerated hospital wastes used as partial substitute for Portland cement (PC) on the mechanical properties and durability of high performance concretes. The analysis of the experimental results on concrete at 10% content of ash resulting from incineration of pharmaceutical wastes with a fineness modulus of 8000 cm(2)/g, in a chloride environment, showed that it contributes positively to the perfection of its mechanical characteristics, its durability with respect to migration of chloride ions and oxygen permeability. On the basis of the experiments performed, it can be concluded that the ash is suitable for formulation of high performance concretes (HPC) and their properties are significantly better compared to the reference concrete (RC). This paper points out the directions for the proper uses of ash of pharmaceutical wastes in concrete. (C) 2018 The Authors. Published by Elsevier B.V.
引用
收藏
页码:218 / 221
页数:4
相关论文
共 50 条
  • [21] Mechanical and durability performance of mortars with fine recycled concrete aggregates and reactive magnesium oxide as partial cement replacement
    Goncalves, T.
    Silva, R. V.
    de Brito, J.
    Fernandez, J. M.
    Esquinas, A. R.
    CEMENT & CONCRETE COMPOSITES, 2020, 105
  • [22] Physical and Mechanical Properties of High Performance Concrete with Alum Sludge as Partial Cement Replacement
    Owaid, Haider Mohammed
    Hamid, Roszilah
    Abdullah, Siti Rozaimah Sheikh
    Kofli, Noorhisham Tan
    Taha, Mohd Raihan
    JURNAL TEKNOLOGI, 2013, 65 (02):
  • [23] A design consideration for durability of high-performance concrete
    Chang, PK
    Peng, YN
    Hwang, CL
    CEMENT & CONCRETE COMPOSITES, 2001, 23 (4-5): : 375 - 380
  • [24] Effect of crushed waste glass as partial replacement of natural fine aggregate on performance of high strength cement concrete
    Paktiawal, Ajmal
    Alam, Mehtab
    ADVANCES IN MATERIALS RESEARCH-AN INTERNATIONAL JOURNAL, 2022, 11 (04): : 251 - 277
  • [25] Study of durability properties on high performance concrete using metakaolin and partial replacement with quarry dust
    Vijay Shankar, G.R.
    Suji, D.
    International Journal of Applied Environmental Sciences, 2013, 8 (07): : 791 - 805
  • [26] Strength and durability of recycled aggregate concrete containing milled glass as partial replacement for cement
    Nassar, Roz-Ud-Din
    Soroushian, Parviz
    CONSTRUCTION AND BUILDING MATERIALS, 2012, 29 : 368 - 377
  • [27] A review of the mechanical properties and durability of concrete containing recycled seashells as a partial cement replacement
    Hasan, Kamrul
    Karim, Ahasanul
    Islam, Md. Toriqule
    Ali, Muaz Bin
    Rahman, Md. Towsikur
    Rahman, Md. Mahfuzur
    Yahaya, Fadzil Mat
    JOURNAL OF MATERIAL CYCLES AND WASTE MANAGEMENT, 2023, 25 (06) : 3192 - 3216
  • [28] Durability analysis of partial replacement of ordinary Portland cement by white glass waste concrete
    da Silva Filho M.J.
    de Souza M.L.
    de Paiva Veras V.C.
    Cabral A.E.B.
    Journal of Building Pathology and Rehabilitation, 2023, 8 (1)
  • [29] A review of the mechanical properties and durability of concrete containing recycled seashells as a partial cement replacement
    Kamrul Hasan
    Ahasanul Karim
    Md. Toriqule Islam
    Muaz Bin Ali
    Md. Towsikur Rahman
    Md. Mahfuzur Rahman
    Fadzil Mat Yahaya
    Journal of Material Cycles and Waste Management, 2023, 25 (6) : 3192 - 3216
  • [30] Mechanical properties and durability of ultra-high-performance concrete with calcined diatomaceous earth as cement replacement
    Hasan, Muttaqin
    Jamil, Muhammad
    Saidi, Taufiq
    JOURNAL OF THE MECHANICAL BEHAVIOR OF MATERIALS, 2023, 32 (01)