The ITER Equatorial Visible/Infra-Red Wide Angle Viewing System: Status of design and R&D

被引：23

作者：

Salasca, Sophie ^{[1
]}

Aumeunier, Marie-Helene ^{[1
]}

Benoit, Fabrice ^{[1
]}

Cantone, Bruno ^{[1
]}

Corre, Yann ^{[1
]}

Delchambre, Elise ^{[1
]}

Ferlet, Marc ^{[1
]}

Gauthier, Eric ^{[1
]}

Guillon, Christophe ^{[1
]}

van Houtte, Didier ^{[1
]}

Keller, Delphine ^{[1
]}

Labasse, Florence ^{[1
]}

Larroque, Sebastien ^{[1
]}

Loarer, Thierry ^{[1
]}

Micolon, Frederic ^{[1
]}

Peluso, Bertrand ^{[1
]}

Proust, Maxime ^{[1
]}

Blanchet, David ^{[2
]}

Peneliau, Yannick ^{[2
]}

Alonso, Javier ^{[3
]}

de la Cal, Eduardo ^{[3
]}

Hidalgo, Carlos ^{[3
]}

Martin, Piedad ^{[3
]}

Medrano, Mercedes ^{[3
]}

Mota, Fernando ^{[3
]}

Luis de Pablos, Jose ^{[3
]}

Rios, Luis ^{[3
]}

Rincon, Esther ^{[3
]}

Vila, Rafael ^{[3
]}

Manzanares, Ana ^{[4
]}

Martin, Vincent ^{[5
]}

Reichle, Roger ^{[6
]}

Le Guern, Frederic ^{[7
]}

机构：

[1] IRFM, CEA, F-13108 St Paul Les Durance, France

[2] DER, DEN, CEA, F-13108 St Paul Les Durance, France

[3] CIEMAT, E-28040 Madrid, Spain

[4] Greenlight Solut SL, Madrid 28015, Spain

[5] Berlin Technol, CS 30495, F-13593 Aix En Provence 3, France

[6] ITER Org, CS 90 046, F-13067 St Paul Les Durance, France

[7] Torres Diagonal Litoral B3, F4E, Barcelona 08019, Spain

来源：

FUSION ENGINEERING AND DESIGN | 2015年 / 96-97卷

关键词：

ITER; Diagnostic; Visible; Infra-Red; First mirror;

D O I：

10.1016/j.fusengdes.2015.02.062

中图分类号：

TL [原子能技术]; O571 [原子核物理学];

学科分类号：

0827 ; 082701 ;

摘要：

The Equatorial Visible/Infra-Red Wide Angle Viewing System (WAVS) is one of the ITER key diagnostics owing to its role in machine investment protection through the monitoring of Plasma Facing Components (PFCs) by Infra-Red thermography and visible imaging. Foreseen to be installed in 4 equatorial port plugs to maximize the coverage of divertor, first wall, heating antennas and upper strike zone, the WAVS will likely be composed of 15 lines of sight and 15 optical systems transferring the light along several meters from the PFCs through the port plug and interspace up to detectors located in the port cell. After a conceptual design phase led by ITER Organization, the design is being further developed through a Framework Partnership Agreement signed between the European Domestic Agency, Fusion for Energy, and a consortium gathering CEA, CIEMAT (with INTA as third party) and Reran Technologies company. The next design step is the System Level Design (SLD) which will enable to consolidate the WAVS specifications as well as the performance realistically achievable (taking into account ITER and project constraints). The SLD has been preceded by a preparatory phase aiming at clarifying the WAVS functions and identifying critical prototyping. The outcomes of this preparatory phase are reported in this paper. First a review by the consortium of the WAVS measurement specifications is presented, for the purpose of a clearer separation of measurement parameters mandatory for machine protection (with stringent requirements) from those relevant for machine control and physics studies. Secondly the main features of the diagnostic are summarized, including a description of its current design, a preliminary analysis of its interfaces and a high level functional analysis. Finally the status of the R&D which may be necessary to validate the diagnostic design is presented. On the one hand, this R&D could consist in testing materials and coatings of optical components to characterize their behavior under the harsh environment of ITER. On the other hand R&D activities could concern prototyping and testing of subsystems of the diagnostic which have been identified as critical, such as the first mirrors and their associated devices (shutter and cleaning system) and the differential movement compensation system. (c) 2015 Elsevier B.V. All rights reserved.

引用

页码：932 / 937

页数：6

共 37 条

[31] Progress on design and development of ITER equatorial launcher: Analytical investigation and R&D of the launcher components for the design improvement
Takahashi, K.
Kobayashi, N.
Ohmori, J.
Suzuki, S.
Kasugai, A.
Sakamoto, K.
FUSION SCIENCE AND TECHNOLOGY, 2007, 52 (02) : 266 - 280
[32] Current status of final design and R&D for ITER blanket shield blocks in Korea
Ha, M. S.
Kim, S. W.
Jung, H. C.
Hwang, H. S.
Heo, Y. G.
Kim, D. H.
Ahn, H. J.
Lee, H. G.
Jung, K. J.
NUCLEAR FUSION, 2015, 55 (07)
[33] Progress in the design, R&D and procurement preparation of the ITER Divertor Remote Handling System
Esque, Salvador
van Hille, Carine
Ranz, Roberto
Damiani, Carlo
Palmer, Jim
Hamilton, David
FUSION ENGINEERING AND DESIGN, 2014, 89 (9-10) : 2373 - 2377
[34] Development of a new dynamic foveated imager on wide-angle infra-red thermography system to improve local spatial resolution in EAST
Zhang, J. Y.
Zhang, B.
Gong, X.
Chang, J.
Jia, M. N.
Liu, C.
Liang, R. R.
Chen, W. L.
Wu, C. H.
Feng, S.
REVIEW OF SCIENTIFIC INSTRUMENTS, 2020, 91 (11):
[35] Overview on R&D and design activities for the ITER core charge exchange spectroscopy diagnostic system
Biel, W.
Baross, T.
Bourauel, P.
Dunai, D.
Durkut, M.
Erdei, G.
Hawkes, N.
v. Hellermann, M.
Hogenbirk, A.
Jaspers, R.
Kiss, G.
Klinkhamer, F.
Koning, J. F.
Kotov, V.
Krasikov, Y.
Krimmer, A.
Lischtschenko, O.
Litnovsky, A.
Marchuk, O.
Neubauer, O.
Offermanns, G.
Panin, A.
Patel, K.
Pokol, G.
Schrader, M.
Snijders, B.
Szabo, V.
van der Valk, N.
Voinchet, R.
Wolters, J.
Zoletnik, S.
FUSION ENGINEERING AND DESIGN, 2011, 86 (6-8) : 548 - 551
[36] The HCLL Test Blanket Module system: Present reference design, system integration in ITER and R&D needs
Salavy, J. -F.
Aiello, G.
David, O.
Gabriel, F.
Giancarli, L.
Girard, C.
Jonqueres, N.
Laffont, G.
Madeleine, S.
Poitevin, Y.
Rampal, G.
Ricapito, I.
Splichal, K.
FUSION ENGINEERING AND DESIGN, 2008, 83 (7-9) : 1157 - 1162
[37] System thermalhydraulics for design basis accident analysis and simulation: Status of tools and methods and direction for future R&D
Bestion, D.
NUCLEAR ENGINEERING AND DESIGN, 2017, 312 : 12 - 29

← 1 2 3 4 →