Investigations of the properties of fiber-metal laminates with stiffening rib embossed by the Incremental Sheet Forming technology

被引：0
|
作者：
Kubit, Andrzej [1 ]
Zielecki, Wladyslaw [1 ]
Kudelski, Rafal [2 ]
Drabczyk, Mateusz [3 ]
机构：
[1] Rzeszow Univ Technol, Fac Mech Engn & Aeronaut, Al Powstancow Warszawy 8, PL-35959 Rzeszow, Poland
[2] AGH Univ Sci & Technol Cracow, Fac Mech Engn & Robot, Al Mickiewicza 30, PL-30059 Krakow, Poland
[3] Univ Rzeszow, Fac Math & Nat Sci, Dept Mech & Mech Engn, Ctr Innovat Technol, Rzeszow, Poland
来源：
PROCEEDINGS OF THE 22ND INTERNATIONAL ESAFORM CONFERENCE ON MATERIAL FORMING (ESAFORM 2019) | 2019年 / 2113卷
关键词：
FRACTURE; FAILURE;
D O I：
10.1063/1.5112736
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
The paper presents the manufacturing process and the results of experimental investigations of 3/2 Fiber Metal Laminates with stiffening ribs made as a longitudinal embossment in external metal layer. The layers were adhesively bonded in an autoclave process, the GFRP layers were made from a prepreg, while the metal layers were made of aluminum alloy sheets 2024-T3 alclad. The stiffening ribs in the metal layer was formed using the Incremental Sheet Forming technology. The FML samples were subjected to buckling tests in order to determine the influence of the rib on the buckling resistance. On the basis of experimental research results, it was found that the stiffening rib in the outer layer of the 3/2 FML composite contributes to the increase of the critical force by about 34.47%.
引用
收藏
页数：6
相关论文
共 45 条
  • [21] Assessment and Validation of Incremental Hole-Drilling Calculation Methods for Residual Stress Determination in Fiber-Metal Laminates
    T. C. Smit
    J. P. Nobre
    R. G. Reid
    T. Wu
    T. Niendorf
    D. Marais
    A. M. Venter
    Experimental Mechanics, 2022, 62 : 1289 - 1304
  • [22] The tensile and fatigue properties of carbon fiber-reinforced PEEK-titanium fiber-metal laminates
    Cortes, P
    Cantwell, WJ
    JOURNAL OF REINFORCED PLASTICS AND COMPOSITES, 2004, 23 (15) : 1615 - 1623
  • [23] Experimental investigations and numerical analysis for improving knowledge of incremental sheet forming process for sheet metal parts
    Dejardin, S.
    Thibaud, S.
    Gelin, J. C.
    Michel, G.
    JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2010, 210 (02) : 363 - 369
  • [24] Experimental investigations and numerical analysis for improving knowledge of incremental sheet forming process for sheet metal parts
    Dejardin, S.
    Gelin, J.C.
    Thibaud, S.
    Materials Science Forum, 2009, 623 : 37 - 48
  • [25] Radial-rotation profile forming: a new processing technology of incremental sheet metal forming
    Laue, Robert
    Haertel, Sebastian
    Awiszus, Birgit
    PROCEEDINGS OF 21ST INTERNATIONAL ESAFORM CONFERENCE ON MATERIAL FORMING (ESAFORM 2018), 2018, 1960
  • [26] The Application of Single Point Incremental Forming Technology of Sheet Metal in Bus Prototyping
    Liu, Gang
    PRODUCT DESIGN AND MANUFACTURING, 2011, 338 : 46 - 55
  • [27] A Study on Dieless Incremental Sheet Metal Forming using Water Jet Technology
    He, Kai
    Li, Jiuhua
    Luo, Qun
    Mao, He
    Du, Ruxu
    MANUFACTURING PROCESS TECHNOLOGY, PTS 1-5, 2011, 189-193 : 795 - +
  • [28] The application of water-jet technology for incremental sheet-metal forming
    Junkar, M
    Heiniger, KC
    Jurisevic, B
    STROJNISKI VESTNIK-JOURNAL OF MECHANICAL ENGINEERING, 2004, 50 (12): : 613 - 622
  • [29] Correction: Assessment and Validation of Incremental Hole-Drilling Calculation Methods for Residual Stress Determination in Fiber-Metal Laminates
    T. C. Smit
    J. P. Nobre
    R. G. Reid
    T. Wu
    T. Niendorf
    D. Marais
    A. M. Venter
    Experimental Mechanics, 2022, 62 : 1241 - 1241
  • [30] Analysis of forming properties and hydroforming process of braided fiber metal laminates
    Li L.
    Lang L.
    Blala H.
    Wang H.
    Cao X.
    Zhongnan Daxue Xuebao (Ziran Kexue Ban)/Journal of Central South University (Science and Technology), 2020, 51 (09): : 2422 - 2429
12345