Control of interfacial intermetallic compounds in Fe-Al joining by Zn addition

被引：62
|
作者：
Yang, J. [1 ,2 ]
Li, Y. L. [1 ]
Zhang, H. [1 ]
Guo, W. [2 ,3 ]
Zhou, Y. [2 ]
机构：
[1] Nanchang Univ, Key Lab Robot & Welding Automat Jiangxi Prov, Sch Mech & Elect Engn, Nanchang 330031, Jiangxi, Peoples R China
[2] Univ Waterloo, Ctr Adv Mat Joining, Waterloo, ON N2L 3G1, Canada
[3] Beijing Univ Aeronaut & Astronaut, Sch Mech Engn & Automat, Beijing 100191, Peoples R China
来源：
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING | 2015年 / 645卷
基金：
加拿大自然科学与工程研究理事会; 中国国家自然科学基金;
关键词：
Interfacial microstructure; Intermetallic compounds; Mechanical properties; Laser dissimilar joint; Al alloy; steel; ALUMINUM-ALLOY; STEEL; MICROSTRUCTURE; PHASES; PARTICLES; CU;
D O I：
10.1016/j.msea.2015.08.036
中图分类号：
TB3 [工程材料学];
学科分类号：
0805 ; 080502 ;
摘要：
By Zn addition to the fusion zone, the interfacial intermetallic compounds (IMCs) of laser Al/steel joint changed from layered Fe2Al5 and needle-like FeAl3 to layered Fe2Al5-xZnx and dispersed FeZn10 with minor Al-rich amorphous phase. This resulted in an improvement in the joint strength and the change of failure mode. (C) 2015 Elsevier B.V. All rights reserved.
引用
收藏
页码：323 / 327
页数：5
相关论文
共 50 条
  • [41] Diffusion in intermetallic phases of the Fe-Al and Fe-Si systems
    Mehrer, H.
    Eggersmann, M.
    Gude, A.
    Salamon, M.
    Sepiol, B.
    Materials Science and Engineering A, 1997, 239-240 : 889 - 898
  • [42] Diffusion in intermetallic phases of the Fe-Al and Fe-Si systems
    Mehrer, H
    Eggersmann, M
    Gude, A
    Salamon, M
    Sepiol, B
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 1997, 240 : 889 - 898
  • [43] New method of in-situ fabrication of protective coatings based on Fe-Al intermetallic compounds
    Chmielewski, T.
    Golanski, D. A.
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE, 2011, 225 (B4) : 611 - 616
  • [44] The Synthesis of Aluminum Matrix Composites Reinforced with Fe-Al Intermetallic Compounds by Ball Milling and Consolidation
    Rodriguez Diaz, Roberto Ademar
    Gonzaga Segura, Sergio Ruben
    Reyes Barragan, Jose Luis
    Ravelero Vazquez, Victor
    Molina Ocampo, Arturo
    Porcayo Calderon, Jesus
    Cruz Mejia, Hector
    Gonzalez Rodriguez, Carlos Alberto
    Barraza Fierro, Jesus Israel
    APPLIED SCIENCES-BASEL, 2021, 11 (19):
  • [45] Development of Binary Fe-Al Intermetallic Compounds by Non-Pressurizing Cladding and Heat Treatment
    Niinobe, Kouichi
    Izuchi, Yuuki
    Takiyama, Naoyuki
    JOURNAL OF THE JAPAN INSTITUTE OF METALS, 2011, 75 (04) : 213 - 222
  • [46] Effect of Si on the growth of Fe-Al intermetallic layer in Zn-11%Al-3%Mg coating
    Li, Kailiang
    Liu, Ya
    Tu, Hao
    Su, Xuping
    Wang, Jianhua
    SURFACE & COATINGS TECHNOLOGY, 2016, 306 : 390 - 396
  • [47] Characterization and Oxidation of Magnetron Sputtered Fe-Al Intermetallic Alloys
    Stönner, Thomas
    Hanžel, Darko
    Baretzky, Brigitte
    Lieb, Klaus-Peter
    Schaaf, Peter
    Hyperfine Interactions, 1998, 112 (1-4): : 155 - 160
  • [48] Review on the formation and inhibition mechanism of Fe-Al intermetallic compound
    Chen X.
    Li L.
    Zhou D.
    2016, Cailiao Daobaoshe/ Materials Review (30): : 125 - 132
  • [49] Intermetallic Fe-Al layers obtained by the powder cloth method
    Binczyk, F
    Skrzypek, ST
    Gierek, A
    POWDER TECHNOLOGY, 1997, 94 (03) : 259 - 263
  • [50] Hot deformation and processing maps of a Fe-Al intermetallic alloy
    Lyszkowski, Radoslaw
    Bystrzycki, Jerzy
    Materials Characterization, 2014, 96 : 196 - 205
12345