Condition-based inspection scheme for condition-based maintenance

In condition-based maintenance (CBM) with periodic inspection, the item is preventively replaced if failure risk, which is calculated based on the information obtained from inspection, exceeds a pre-determined threshold. The determination of optimal replacement threshold is often based on minimisation of long-run average maintenance costs per unit time due to preventive and failure replacements. It is assumed that inspections are performed at equal time intervals and that the corresponding cost is negligible. However, in many practical situations where CBM is implemented, e. g. manufacturing processes, inspections require labours, specific test devices, and sometimes suspension of operations. Thus, when inspection cost is considerable, it is reasonable to inspect less frequently during the time the item is in healthier states, and, more frequently as time passes and/or the item degrades, namely, a condition-based inspection scheme. This paper proposes a novel two-phase approach for determination of replacement threshold and a condition-based inspection scheme for CBM. First, it takes into account failure and preventive replacement costs to determine the optimal replacement threshold assuming that inspections are performed at equal time intervals with no cost. This assumption is, then, relaxed and its consequences on total average cost are evaluated using a proposed iterative procedure to obtain a cost-effective condition-based inspection scheme. The proposed approach can be utilised in many CBM applications. For the sake of simplicity of presentation, the approach is illustrated through a simplified case study already reported by some researchers referenced in the paper.