Improve the mechanical durability of superhydrophobic/superamphiphobic coating through multiple cross-linked mesh structure

被引:6
|
作者
Zhao, Xia [1 ]
Duan, Yanping [1 ]
机构
[1] Shaanxi Univ Technol, Sch Chem & Environm Sci, Shaanxi Key Lab Catalysis, Hanzhong 723001, Shaanxi, Peoples R China
关键词
Cross-linked; Superhydrophobic; Durability; Mesh structure; Abrasion resistance; Fluoropolymer; SUPERHYDROPHOBIC COATINGS; FACILE PREPARATION; SURFACES; ROBUST; ANTICORROSION;
D O I
10.1016/j.colsurfa.2022.128560
中图分类号
O64 [物理化学(理论化学)、化学物理学];
学科分类号
070304 ; 081704 ;
摘要
Superhydrophobic/superamphiphobic coatings have attracted extensive attention because of their unique liquid repellency, but their poor durability hinders their large-scale application in the market. This paper designs and synthesizes a mesh structure that uses covalent bonds to link the roughness-building nanoparticles, film-forming polymer, and the substrate together, which significantly improves the stability and durability of the coating. Firstly, the acrylate copolymer (FHA) containing silicon monomer and fluorine monomer was synthesized by free radical polymerization. Then FHA, SiO2/TiO2 nanoparticles, and self-made crosslinker (AG) were connected to form a meshwork structure by Si-O-Si bond through a hydrolysis condensation reaction. Finally, the curing agent (HDI) was added before dip-coating, and the coatings were firmly linked to the substrate through secondary cross-linking. The single-factor experiment showed that when silicon monomer was 12 wt%, fluorine monomer was 5 wt% and FHA content was 16 wt%, the coatings displayed the 5B adhesion. The contact angle (CA) to water, diiodomethane, soybean oil, rapeseed oil, hexadecane, kerosene, waste engine oil on the FAFH-SiO2 coating (consists of the mesh structure and SiO2 nanoparticles) were 158.7 degrees +/- 1.5 degrees, 151.1 degrees +/- 1.6 degrees, 150.1 degrees +/- 1.7 degrees, 150.4 degrees +/- 1.5 degrees, 141.1 degrees +/- 1.6 degrees, 142.2 degrees +/- 1.9 degrees, and 144.7 degrees +/- 1.8 degrees, respectively. The coatings could maintain WCA (water contact angle) > 150 degrees after immersion in HCl (PH = 1), toluene, ethanol, and acetone for 84 h. The sandpaper abrasion, water flow scouring, high-pressure steam cooking, machine washing, and environmental exposure tests proved that the coatings have excellent stability and durability. This method for enhancing the durability of the coatings is suitable for particles and substrates containing active hydrogen or hydroxyl groups, which has a wide range of application prospects.
引用
收藏
页数:11
相关论文
共 50 条
  • [21] D-Cysteine Functionalized Superhydrophobic Nanocomposite Coating with Multiple-Action Antibacterial Property and Enhanced Mechanical Durability
    Qian, Hongchang
    Liu, Wenlong
    Chang, Weiwei
    Hao, Xiangping
    Zhang, Dawei
    COATINGS, 2022, 12 (08)
  • [22] Mechanical behavior of highly cross-linked polymer networks and its links to microscopic structure
    Mukherji, Debashish
    Abrams, Cameron F.
    PHYSICAL REVIEW E, 2009, 79 (06):
  • [23] Effect of Cross-linked Structure on Mechanical and Tribological Properties of Phenolic Modified Epoxy Coatings
    Yan X.-X.
    Chen L.
    Xu H.-Y.
    Cui H.-X.
    Lei Z.-Q.
    Zhang Y.
    Surface Technology, 2023, 52 (02): : 206 - 214
  • [24] A cross-linked coating decorated mesh prepared by brush-painting method for oil-in-water emulsions separation
    Zeng, Xinjuan
    Shen, Yuanyuan
    Liu, Yongpeng
    Du, Jingcheng
    Chen, Li
    Zhou, Wei
    Yang, Hao
    Zuo, Jihao
    Zhou, Cailong
    Lin, Jing
    MATERIALS CHEMISTRY AND PHYSICS, 2020, 242
  • [25] Changes in Chemical Structure and Mechanical Properties Induced in Cross-linked Polyethylene by Thermal and Radiation Aging
    Miyazaki, Yu
    Hirai, Naoshi
    Ohki, Yoshimichi
    PROCEEDINGS OF THE 2020 3RD IEEE INTERNATIONAL CONFERENCE ON DIELECTRICS (ICD 2020), 2020, : 45 - 48
  • [26] Influence of Network Structure on Dynamic Mechanical Properties of Cross-linked Polystyrene/Glass Fiber Composites
    Zhu, Quanyao
    Wu, Fei
    Chen, Wen
    MULTI-FUNCTIONAL MATERIALS AND STRUCTURES II, PTS 1 AND 2, 2009, 79-82 : 151 - 154
  • [27] Structure, Dynamics, and Mechanical Properties of Cross-Linked Calcium Aluminosilicate Hydrate: A Molecular Dynamics Study
    Yang, Jun
    Hou, Dongshuai
    Ding, Qingjun
    ACS SUSTAINABLE CHEMISTRY & ENGINEERING, 2018, 6 (07): : 9403 - 9417
  • [28] STUDY OF STRUCTURE AND PHYSICO-MECHANICAL PROPERTIES OF CROSS-LINKED POLYMERS ON BASIS OF OLIGOMERIC DICYANATES
    PANKRATOV, VA
    ASKADSKII, AA
    PAPURIYA, MM
    KOCHERGIN, YS
    VINOGRADOVA, SV
    SLONIMSKII, GL
    KORSHAK, VV
    VYSOKOMOLEKULYARNYE SOEDINENIYA SERIYA A, 1977, 19 (01): : 142 - 148
  • [29] Modulation of Mechanical Properties of Silica-Filled Silicone Rubber by Cross-Linked Network Structure
    Jiang, Shuangyan
    Yong, Zhanfu
    POLYMERS, 2024, 16 (16)
  • [30] Potential of cross-linked plastics for the automotive and mechanical engineering: Plastic upgrading through electron beam crosslinking
    Schneider, Wilhelm
    Konstruktion, 2023, 75 (10): : 46 - 48