Numerical Simulation and Unsteady Combustion Model of AP/HTPB Propellant under Depressurization by Rotation

被引:14
|
作者
Ye, Zhen-W. [1 ]
Yu, Yong-G. [1 ]
机构
[1] Nanjing Univ Sci & Technol, Sch Energy & Power Engn, Nanjing 210094, Jiangsu, Peoples R China
关键词
AP/HTPB; composite solid propellant; rotation; out-of-phase blowing effect; unsteady combustion; DIFFUSION FLAME;
D O I
10.1002/prep.201800091
中图分类号
O69 [应用化学];
学科分类号
081704 ;
摘要
In order to study micro-scale combustion characteristics of base-bleed propellant ammonium perchlorate/hydroxyl terminated polybutadiene (AP/HTPB) under rotation condition, a two-dimensional unsteady rotating combustion model of periodic sandwich model of AP/HTPB was established. In the gas phase, a two-step overall reaction was used to couple the gas-solid boundary layer, the rotational momentum was fitted and the numerical simulation comparative analysis under the initial combustion pressure of 0.1 MPa-5 MPa and the rotation velocity of 0-10 800 r min(-1) was experimented. The results show that under the conditions of an initial combustion pressure of 3.5 MPa, a depressurization rate of 1000 MPa s(-1) and a rotation velocity of 10 200 r min(-1), the formation of a narrow diffusion-controlled chemical reaction zone appears in the initial stage of depressurization. When the combustion pressure drops to about 0.88 MPa, the flame shows dual characteristics: diffusion-controlled and premixed combustion. When the pressure dropped to 0.1 MPa, the flame is premixed combustion. The steady combustion process at different combustion pressures and different rotational velocities was analyzed numerically. The results show that there is a linear positive correlation between the flame deflection angle and the pressure. When the rotation velocity is lower than 10 000 r min(-1), the deflection angle of the gas flame increases linearly with the rotation velocity. However, when the rotation velocity is higher than 10 000 r min(-1), the deflection angle and the rotation velocity of the gas flame increase exponentially. The trend of the average Reynolds number of the combustion surface is basically the same as that of the deflection angle of the gas flame. Therefore, the average Reynolds number of the combustion surface can be used to describe the influence of rotation and pressure on the deflection angle of the gas phase flame.
引用
收藏
页码:493 / 504
页数:12
相关论文
共 50 条
  • [21] AP-HTPB propellant combustion under strain conditions with laser absorption spectroscopy
    Gu, Mingming
    Ouyang, Jianfeng
    Wang, Shaojie
    Yuan, Wenhao
    Shi, Xiaoming
    Hou, Kaiyu
    Xiao, Libai
    Gao, Hongxu
    Zhou, Zhongyue
    Qi, Fei
    APPLIED OPTICS, 2023, 62 (06) : A37 - A45
  • [22] Thermal decomposition and combustion characteristics of Al/AP/HTPB propellant
    Yuan, Jifei
    Liu, Jianzhong
    Zhou, Yunan
    Zhang, Yanwei
    Cen, Kefa
    JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY, 2021, 143 (06) : 3935 - 3944
  • [23] Ignition and combustion characteristics of AP/HTPB composite propellant by laser
    Zhang, Lingke
    Zhao, Wei
    Wu, Lizhi
    Zhongguo Jiguang/Chinese Journal of Lasers, 2013, 40 (08):
  • [24] Thermal decomposition and combustion characteristics of Al/AP/HTPB propellant
    Jifei Yuan
    Jianzhong Liu
    Yunan Zhou
    Yanwei Zhang
    Kefa Cen
    Journal of Thermal Analysis and Calorimetry, 2021, 143 : 3935 - 3944
  • [25] Effects of AP powder topology on microscale combustion properties of AP/HTPB propellant
    Zou, Xiangrui
    Wang, Ningfei
    Chen, Yi
    Han, Lei
    Wang, Junlong
    Wang, Chao
    Shi, Baolu
    POWDER TECHNOLOGY, 2021, 394 : 468 - 477
  • [26] Validation of a Multi-Dimensional Model for Unsteady Combustion of AP/HTPB Propellants
    Lopez-Munoz, Carmen
    Sanchez Velasco, Francisco-Javier
    Garcia-Cascales, Jose-Ramon
    Mur, Ramon
    Oton-Martinez, Ramon-Antonio
    PROPELLANTS EXPLOSIVES PYROTECHNICS, 2019, 44 (11) : 1482 - 1493
  • [27] Cook-off test and numerical simulation of AP/HTPB composite solid propellant
    Yang, Hou-Wen
    Yu, Yong-Gang
    Ye, Rui
    Xue, Xiao-Chun
    Li, Wen-Feng
    JOURNAL OF LOSS PREVENTION IN THE PROCESS INDUSTRIES, 2016, 40 : 1 - 9
  • [28] Numerical Simulation of the Pouring Process of HTPB Propellant
    Jiang X.-R.
    Li Z.
    Lu R.
    Huang D.-H.
    Hanneng Cailiao/Chinese Journal of Energetic Materials, 2020, 28 (08): : 724 - 730
  • [29] Effects of acceleration overload on combustion characteristics of HTPB/AP/Al propellant
    He, Ye
    Li, Junwei
    Tian, Zhongliang
    Qin, Shengfu
    Xu, Tuanwei
    Ding, Miao
    Wang, Ningfei
    Hangkong Dongli Xuebao/Journal of Aerospace Power, 2024, 39 (08):
  • [30] Understanding AP/HTPB composite propellant combustion from new perspectives
    Cang, Yu
    Wang, Lipo
    COMBUSTION AND FLAME, 2024, 259