Parametric Modeling as a Technology of Rapid Prototyping in Light Industry

被引：1
|
作者：
Tomilov, I. N. [1 ]
Grudinin, S. N. [2 ]
Frolovsky, V. D. [2 ]
Alexandrov, A. A. [1 ]
机构：
[1] Tomsk Polytech Univ, Yurga Inst Technol, TPU Affiliate, Leningradskaya Str 26, Yurga 652055, Russia
[2] Novosibirsk State Tech Univ, Marx Ave 20, Novosibirsk 630073, Russia
来源：
INTERNATIONAL SCIENTIFIC AND PRACTICAL CONFERENCE ON URGENT PROBLEMS OF MODERN MECHANICAL ENGINEERING | 2016年 / 127卷
关键词：
D O I：
10.1088/1757-899X/127/1/012028
中图分类号：
TH [机械、仪表工业];
学科分类号：
0802 ;
摘要：
The paper deals with the parametric modeling method of virtual mannequins for the purposes of design automation in clothing industry. The described approach includes the steps of generation of the basic model on the ground of the initial one (obtained in 3D-scanning process), its parameterization and deformation. The complex surfaces are presented by the wireframe model. The modeling results are evaluated with the set of similarity factors. Deformed models are compared with their virtual prototypes. The results of modeling are estimated by the standard deviation factor.
引用
收藏
页数：6
相关论文
共 50 条
  • [21] Coding system for rapid prototyping industry
    Ingole, Dilip
    Kuthe, Abhaykumar
    Deshmukh, Tushar
    Bansod, Satish
    RAPID PROTOTYPING JOURNAL, 2008, 14 (04) : 221 - 233
  • [22] Application of Rapid Prototyping Technology for Modeling the Mechanisms of F. Reuleaux Collection
    Vlasov, M.
    Samoylova, M.
    EXPLORATIONS IN THE HISTORY OF MACHINES AND MECHANISMS, 2016, 32 : 9 - 15
  • [23] PHOTOPOLYMER JETTING TECHNOLOGY IN RAPID PROTOTYPING
    Gothait, Hanan
    Even, Robert
    Danai, Dror
    PROCEEDINGS OF THE 1ST INTERNATIONAL CONFERENCE ON ADVANCED RESEARCH IN VIRTUAL AND RAPID PROTOTYPING, 2003, : 385 - 387
  • [24] Rapid prototyping in dentistry: technology and application
    Qingbin Liu
    Ming C. Leu
    Stephen M. Schmitt
    The International Journal of Advanced Manufacturing Technology, 2006, 29 : 317 - 335
  • [25] Effective Utilization of Rapid Prototyping Technology
    Novakova-Marcincinova, L.
    Fecova, V.
    Novak-Marcincin, J.
    Janak, M.
    Barna, J.
    ADVANCES IN NON CONVENTIONAL MATERIALS PROCESSING TECHNOLOGIES, 2012, 713 : 61 - 66
  • [26] Effective Utilization of Rapid Prototyping Technology
    Novakova-Marcincinova, L.
    Fecova, V.
    Novak-Marcincin, J.
    Janak, M.
    Barna, J.
    4TH MANUFACTURING ENGINEERING SOCIETY INTERNATIONAL CONFERENCE (MESIC 2011), 2012, 1431 : 834 - 841
  • [27] Development and tendency of rapid prototyping technology
    Yan, YN
    Hong, GD
    LASER PROCESSING OF MATERIALS AND INDUSTRIAL APPLICATIONS II, 1998, 3550 : 298 - 306
  • [28] Autocoding: An enabling technology for rapid prototyping
    Robbins, CB
    1996 IEEE INTERNATIONAL CONFERENCE ON ACOUSTICS, SPEECH, AND SIGNAL PROCESSING, CONFERENCE PROCEEDINGS, VOLS 1-6, 1996, : 1260 - 1263
  • [29] Medical Applications of Rapid Prototyping Technology
    Chaudhari, Rakesh
    Loharkar, Praveen Kumar
    Ingle, Asha
    RECENT ADVANCES IN INDUSTRIAL PRODUCTION, ICEM 2020, 2022, : 241 - 250
  • [30] Surfaces: Concept, Design, Parametric Modeling and Prototyping
    Casale, Andrea
    Valenti, Graziano Mario
    Calvano, Michele
    Romor, Jessica
    NEXUS NETWORK JOURNAL, 2013, 15 (02) : 271 - 283
12345