Efficiency of a dense thin CGO buffer layer for solid oxide fuel cell operating at intermediate temperature

被引:51
|
作者
Constantin, G. [1 ]
Rossignol, C. [1 ]
Briois, P. [2 ]
Billard, A. [2 ]
Dessemond, L. [1 ]
Djurado, E. [1 ]
机构
[1] Univ Grenoble 1, Univ Savoie, CNRS Grenoble INP, LEPMI,UMR 5279, F-38402 St Martin Dheres, France
[2] UTBM, IRTES LERMPS EA 7274, F-90010 Belfort, France
关键词
Buffer layer; LSCF; CGO; YSZ; Ageing; Impedance spectroscopy; ELECTROSTATIC SPRAY DEPOSITION; YTTRIA-STABILIZED ZIRCONIA; ELECTROCHEMICAL CHARACTERIZATION; IMPEDANCE SPECTROSCOPY; REFERENCE ELECTRODE; EXPERIMENTAL LIMITATIONS; CATHODE MATERIALS; MODEL ELECTRODES; OXYGEN REDUCTION; SOFC CATHODES;
D O I
10.1016/j.ssi.2013.07.004
中图分类号
O64 [物理化学(理论化学)、化学物理学];
学科分类号
070304 ; 081704 ;
摘要
An ageing investigation of LSCF/CGO/YSZ half-cell, at 700 degrees C in air at OCP, was performed for different CGO buffer layer thicknesses (0, 0.11, 0.45, 1.1 and 2 mu m), using impedance spectroscopy (IS). The ageing behavior of the half-cell has been found to be strongly dependent on the CGO thickness. With addition of the CGO buffer layer the initial apparent electrolyte resistance was significantly reduced, while the LSCF cathodes showed limited performance degradation over a period of 530 h. X-ray microanalyses have shown that the recorded degradation of the LSCF cathode without buffer layer is due to the diffusion and the segregation of Sr at the LSCF/YSZ interface. (C) 2013 Elsevier B.V. All rights reserved.
引用
收藏
页码:98 / 104
页数:7
相关论文
共 50 条
  • [21] Intermediate temperature solid oxide fuel cells
    Meng, Guangyao
    Fu, Qingxi
    Peng, Dingkun
    Taiyangneng Xuebao/Acta Energiae Solaris Sinica, 2002, 23 (03): : 378 - 382
  • [22] Morphological studies of macrostructure of Ni-CGO anode hollow fibres for intermediate temperature solid oxide fuel cells
    Othman, Mohd Hafiz Dzarfan
    Wu, Zhentao
    Droushiotis, Nicolas
    Kelsall, Geoff
    Li, K.
    JOURNAL OF MEMBRANE SCIENCE, 2010, 360 (1-2) : 410 - 417
  • [23] Lithium Iron Oxide - An Anode Material for Intermediate Temperature Solid Oxide Fuel Cell
    Muhl, T. T.
    Irvine, J. T. S.
    SOLID OXIDE FUEL CELLS 13 (SOFC-XIII), 2013, 57 (01): : 1533 - 1538
  • [24] Performance of a double-layer CGO/YSZ electrolyte for solid oxide fuel cells
    A. Tsoga
    A. Gupta
    A. Naoumidis
    D. Skarmoutsos
    P. Nikolopoulos
    Ionics, 1998, 4 : 234 - 240
  • [25] Performance of a Double-Layer CGO/YSZ Electrolyte for Solid Oxide Fuel Cells
    Tsoga, A.
    Gupta, A.
    Naoumidis, A.
    Skarmoutsos, D.
    Nikolopoulos, P.
    IONICS, 1998, 4 (3-4) : 234 - 240
  • [26] Demonstration of high efficiency intermediate-temperature solid oxide fuel cell based on lanthanum gallate electrolyte
    Inagaki, T
    Nishiwaki, F
    Kanou, J
    Yamasaki, S
    Hosoi, K
    Miyazawa, T
    Yamada, M
    Komada, N
    JOURNAL OF ALLOYS AND COMPOUNDS, 2006, 408 : 512 - 517
  • [27] Effect of nanostructured anode functional layer thickness on the solid-oxide fuel cell performance in the intermediate temperature
    Yamaguchi, Toshiaki
    Sumi, Hirofumi
    Hamamoto, Koichi
    Suzuki, Toshio
    Fujishiro, Yoshinobu
    Carter, J. David
    Barnett, Scott A.
    INTERNATIONAL JOURNAL OF HYDROGEN ENERGY, 2014, 39 (34) : 19731 - 19736
  • [28] Short stack performance of intermediate temperature-operating solid oxide fuel cells with hydrocarbon fuel processor
    Bae, J.
    Jee, H.
    Kim, J.
    Yoo, Y. S.
    THERMEC 2006, PTS 1-5, 2007, 539-543 : 1338 - +
  • [29] Designing the Interfacial Layer between the Electrolyte and Fuel Electrode for Solid Oxide Fuel Cells Operating at Intermediate Temperatures with Fuel Flexibility
    Bang, Sehee
    Lee, Jongseo
    Lee, Wonyoung
    TRANSACTIONS OF THE KOREAN SOCIETY OF MECHANICAL ENGINEERS B, 2023, 47 (12) : 631 - 637
  • [30] Optimization of Solid Oxide Fuel Cell Ni-CGO Anode Porosity
    Tamm, K.
    Kivi, I.
    Anderson, E.
    Moeller, P.
    Nurk, G.
    Lust, E.
    SOLID OXIDE FUEL CELLS 12 (SOFC XII), 2011, 35 (01): : 1771 - 1779