Evaluation of lubricant properties of bio-lubricant formulations developed from neem seed oil

被引:0
|
作者
Menon, Krishnaprasad S. [1 ]
Ambigai, R. [1 ]
机构
[1] SRM Inst Sci & Technol, Dept Mech Engn, Chennai 603203, India
关键词
neem seed oil; additives; lubrication properties; wear; coefficient of friction; viscosity; bio-lubricant; TRIBOLOGICAL PROPERTIES; BIOLUBRICANT; ADDITIVES; GRAPHENE;
D O I
10.1504/IJSURFSE.2023.134787
中图分类号
TH [机械、仪表工业];
学科分类号
0802 ;
摘要
The use of petroleum products as lubricants has already created a large number of environmental problems and this creates the importance of the search for environment-friendly vegetable oils. This study evaluates and compares the lubricant properties of neem seed oil with various proportions of stearic acid and low-density polyethylene (LDPE) separately as additives and compared with the mineral oil, SAE20W40. The bio-lubricant formulation of neem seed oil with 2% stearic acid reduced the wear scar diameter (WSD) of the base oil by 30%, and the coefficient of friction (COF) by 46.3%. At the same time, LDPE does not have a major role in varying the tribological property. The addition of LDPE had outstanding effects on improving the viscosity of neem seed oil whereas stearic acid did not improve the viscosity of the base oil considerably. The cold flow properties of the samples were evaluated using differential scanning calorimetry (DSC).
引用
收藏
页码:248 / 264
页数:18
相关论文
共 50 条
  • [21] Microwave-assisted synthesis of trimethylolpropane triester (bio-lubricant) from camelina oil
    Rokni, Kian
    Mostafaei, Mostafa
    Dehghani-Soufi, Masoud
    Kahrizi, Danial
    SCIENTIFIC REPORTS, 2022, 12 (01)
  • [22] Micro and nanoparticles blended sesame oil bio-lubricant: study of its tribological and rheological properties
    Nair, Sabarinath Sankaran
    Nair, Kumarapillai Prabhakaran
    Rajendrakumar, Perikinalil Krishnan
    MICRO & NANO LETTERS, 2018, 13 (12): : 1743 - 1746
  • [23] Effect of bio-lubricant on tribological characteristics of steel
    Habibullah, M.
    Masjuki, H. H.
    Kalam, M. A.
    Ashraful, A. M.
    Habib, M. A.
    Mobarak, H. M.
    10TH INTERNATIONAL CONFERENCE ON MECHANICAL ENGINEERING (ICME 2013), 2014, 90 : 740 - 745
  • [24] Impact of liquid crystal additives on a canola oil-based bio-lubricant
    Elemsimit, Hamid A.
    Grecov, Dana
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART J-JOURNAL OF ENGINEERING TRIBOLOGY, 2015, 229 (02) : 126 - 135
  • [25] Conversion of lipid into high-viscosity branched bio-lubricant base oil
    Chen, Shuang
    Wu, Tingting
    Zhao, Chen
    GREEN CHEMISTRY, 2020, 22 (21) : 7348 - 7354
  • [26] Preliminary studies on physical property of canola oil plus ZDDP as bio-lubricant
    Azhari, M. A.
    Zainal, S. H.
    Saroji, M. F. H. M.
    Nuri, N. R. Mat
    PROCEEDINGS OF MALAYSIAN INTERNATIONAL TRIBOLOGY CONFERENCE 2015, 2015, : 215 - 216
  • [27] Evaluation of lignin-enriched side-streams from different biomass conversion processes as thickeners in bio-lubricant formulations
    Borrero-Lopez, Antonio M.
    Martin-Sampedro, Raquel
    Ibarra, David
    Valencia, Concepcion
    Eugenio, Maria E.
    Franco, Jose M.
    INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES, 2020, 162 : 1398 - 1413
  • [28] Optimized procedure for the preparation of an enzymatic nanocatalyst to produce a bio-lubricant from waste cooking oil
    Sarno, Maria
    Iuliano, Mariagrazia
    Cirillo, Claudia
    CHEMICAL ENGINEERING JOURNAL, 2019, 377
  • [29] Physico-chemical and tribological properties of commercial oil - bio-lubricant mixtures dispersed with graphene nanoplatelets
    Banavathu, Koteswara Rao
    Chebattina, Kodanda Rama Rao
    Srinivas, V.
    Moorthy, Ch V. K. N. S. N.
    Pullagura, Gandhi
    RSC ADVANCES, 2023, 13 (26) : 17575 - 17586
  • [30] Enhanced performance of bio-lubricant properties with nano-additives for sustainable lubrication
    Sadiq, Ibrahim Ogu
    Suhaimi, Mohd Azlan
    Sharif, Safian
    Yusof, Noordin Mohd
    Hisam, Muhammad Juzaili
    INDUSTRIAL LUBRICATION AND TRIBOLOGY, 2022, 74 (09) : 995 - 1006