Long-term modeling of the performance of a solar still with phase-change material

被引:12
|
作者
Radomska, Ewelina [1 ]
Mika, Lukasz [1 ]
机构
[1] AGH Univ Sci & Technol, Fac Energy & Fuels, Dept Thermal & Fluid Flow Machines, Mickiewicza 30 Av, PL-30059 Krakow, Poland
关键词
Desalination; Distillation; Phase-change material; Solar still; SINGLE-SLOPE; TEMPERATURE-RANGE; ENERGY; OPTIMIZATION; DESALINATION; PRODUCTIVITY; ENHANCEMENT; WATER; AIR;
D O I
10.1016/j.applthermaleng.2023.121339
中图分类号
O414.1 [热力学];
学科分类号
摘要
Solar stills may be a small-scale and eco-friendly alternative to conventional, large-scale, and fossil-fuel-powered desalination plants due to growing worldwide water scarcity. However, solar stills suffer from low productivity which can be increased by optimizing the water mass and phase-change material (PCM) mass. Therefore, this paper aims at investigating the influence of water mass and PCM mass on the long-term performance of a solar still (SS) located in Poland. The long-term performance of SS is an important issue, as people need desalinated water all year round. Simultaneously, there is a limited number of publications concerning this issue in the open literature as most papers focus on the SS performance in a short-term period, usually no more than a couple of days. Therefore, research on the effect of water and PCM mass on SS performance in the context of long-term operation under various weather conditions, which is done in this work, is valuable and necessary. Additionally, this is the first time when the SS is investigated under Polish weather conditions. The study is carried out by conducting a theoretical analysis based on the mathematical modeling of the solar still. The mathematical model describing the thermal processes in the SS is established and validated using the experimental results. The results of simulations for average days for each month show that the maximum productivity of the SS is in July (3039 mL/m2/day with 5 kg of water), while the lowest is in October (900 mL/m2/day). The greatest annual SS productivity is 488.8 L/m2/year in Poland and is achieved with 5 kg of water and without PCM. The daily productivity is inversely proportional to the mass of water and the mass of PCM. The PCM reduces productivity by up to 11%. The results of daily simulations from April to October 2021 show that the daily productivity of the SS in Poland varies from 0.2 L/m2/day to 5.2 L/m2/day. The productivity of the SS investigated in this study in Poland is comparable to the productivity of solar stills investigated in countries with similar daily solar insolation and ambient air temperature.
引用
收藏
页数:15
相关论文
共 50 条
  • [41] Analysis of solar still integrated with phase change material and pin fins as absorbing material
    Kateshia, Jyotin
    Lakhera, Vikas J.
    JOURNAL OF ENERGY STORAGE, 2021, 35
  • [42] Experimental Investigation for Enhancement of Solar Still Performance for Wastewater Treatment with the Influence of Encapsulated Phase Change Material
    Sharma, Mriduta
    Tyagi, Vineet Veer
    Chopra, Kapil
    Kothari, Richa
    ENERGY TECHNOLOGY, 2024,
  • [43] Characterization of form-stable phase-change material for solar photovoltaic cooling
    Senthilkumar, M.
    Balasubramanian, K. R.
    Kottala, Ravi Kumar
    Sivapirakasam, S. P.
    Maheswari, L.
    JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY, 2020, 141 (06) : 2487 - 2496
  • [44] Analysis of solar still with nanoparticle incorporated phase change material for solar desalination application
    Rufuss, D. Dsilva Winfred
    Iniyan, S.
    Suganthi, L.
    Davies, P. A.
    Akinaga, Takeshi
    PROCEEDINGS OF THE ISES SOLAR WORLD CONFERENCE 2015, 2015, : 1271 - 1280
  • [45] Thermal Performance Measurement Procedure and Its Accuracy for Shape-Stabilized Phase-Change Material and Microcapsule Phase-Change Material Combined with Building Materials
    Kim, Hyun Bae
    Mae, Masayuki
    Choi, Youngjin
    SUSTAINABILITY, 2021, 13 (12)
  • [46] Study on a tankless solar heating system using phase-change material plaster
    Kusama, Yuka
    Ishidoya, Yuji
    BUILDING AND ENVIRONMENT, 2018, 127 : 256 - 267
  • [47] Characterization of form-stable phase-change material for solar photovoltaic cooling
    M. Senthilkumar
    K. R. Balasubramanian
    Ravi Kumar Kottala
    S. P. Sivapirakasam
    L. Maheswari
    Journal of Thermal Analysis and Calorimetry, 2020, 141 : 2487 - 2496
  • [48] PERFORMANCE ENHANCEMENT OF CONCENTRATED PHOTOVOLTAIC SYSTEM USING PHASE-CHANGE MATERIAL
    Emam, Mohamed
    Ahmed, Mahmoud
    Ookawara, Shinichi
    PROCEEDINGS OF THE ASME 10TH INTERNATIONAL CONFERENCE ON ENERGY SUSTAINABILITY, 2016, VOL 1, 2016,
  • [49] Energy performance of an office cooling system with phase-change material tank
    Susman, Gideon
    Dehouche, Zahir
    Craig, Salmaan
    Hassan, Rafay
    PROCEEDINGS OF THE INSTITUTION OF CIVIL ENGINEERS-ENERGY, 2012, 165 (04) : 169 - 179
  • [50] Influence of the copper foam shape on thermal performance of phase-change material
    Gao, Yanna
    Liu, Fudan
    Wang, Jiahui
    Ye, WeiRui
    Meng, Xi
    JOURNAL OF ENERGY STORAGE, 2021, 36