Optimization of parameters for adsorption of acid yellow 36 dye onto nitrate-intercalated MgAl LDH nanoparticle using Box-Behnken design

被引:5
|
作者
Yadav, Balram Singh [2 ]
Durgawati, Sudip [3 ]
Dasgupta, Sudip [1 ,2 ]
机构
[1] Natl Inst Technol, Dept Ceram Engn, Rourkela 769008, India
[2] Natl Inst Technol, Dept Ceram Engn, Rourkela, India
[3] Natl Inst Technol, Dept Food Proc Engn, Rourkela, India
关键词
acid yellow 36; anion-exchange mechanism; Box-Behnken design (BBD); nitrate-intercalated MgAl LDH; response surface methodology (RSM); LAYERED DOUBLE HYDROXIDE; AQUEOUS-SOLUTION; TEXTILE DYE; ANIONIC DYE; REMOVAL; KINETICS; ORANGE; BATCH; ION; PH;
D O I
10.1002/jctb.7460
中图分类号
Q81 [生物工程学(生物技术)]; Q93 [微生物学];
学科分类号
071005 ; 0836 ; 090102 ; 100705 ;
摘要
BACKGROUND: Layered double hydroxide nanoparticles have been extensively investigated and exploited for the removal of harmful anions from contaminated water. For adsorption of acid yellow dye (AY) from contaminated water, nitrate-intercalated MgAl layered double hydroxide (LDH) nanoparticles were synthesized using the co-precipitation method with the refluxing condition in a nitrogen atmosphere. RESULTS: The X-ray diffraction pattern of LDH nanoparticles showed that LDH nanopowder with nitrate in the interlayer position was successfully synthesized. The shift in (003) basal plane diffraction peak to a lower angle (2 theta) of 7.75 degrees in the LDH-AY from 10.40 degrees in the pristine LDH confirmed the intercalation of AY in the interlayer space of LDH. Variable factors for the adsorption of the AY on the LDH nanoparticles were examined in the batch process using ultraviolet-visible spectroscopy and those included the adsorbent dose (5-30 mg), the incubation time (3-60 min), the temperature (25-50 degrees C), the pH of the AY aqueous suspension (5-9) and the AY concentration (0.03-0.1 mg mL(-1)). Box-Behnken design was used to optimize the three independent variables of temperature, incubation time and pH of AY solution for the adsorption of the dye. The optimized values of the incubation time, temperature and pH were found to be 25.89 min, 35.99 degrees C and 5.16, respectively. A maximum adsorption rate of 0.00515 g mg(-1) min(-1) of AY onto LDH nanoparticles was found at a solution pH of 5 and a temperature of 50 degrees C. The adsorption kinetics of the AY at different suspension pH values and temperature followed a pseudo-second-order kinetic model. Furthermore, an adsorption isotherm study for the adsorption of AY at a temperature of 40 degrees C and pH 5 followed a Langmuir isotherm model, and the maximum adsorption capacity of the AY was calculated to be 412.55 mg g(-1) with excellent regeneration capacity. CONCLUSION: The study revealed that the synthesized nitrate intercalated Mg Al LDH nanoparticles using the reflux conditions offered promising potential to adsorb acid yellow 36 dye form its aqueous solution. (c) 2023 Society of Chemical Industry (SCI).
引用
收藏
页码:2305 / 2317
页数:13
相关论文
共 50 条
  • [41] Use of the Box-Behnken Experimental Design for the Optimization of Orange II (Acid Orange 7) Adsorption on Aloe vera
    Aguilar, Maria Isabel
    Llorens, Mercedes
    Ortuno, Juan Francisco
    Meseguer, Victor Francisco
    Perez-Marin, Ana Belen
    Cases, Alejandro
    [J]. SUSTAINABILITY, 2023, 15 (22)
  • [42] Adsorption property of direct red brown onto acid-thermal-modified sepiolite and optimization of adsorption conditions using Box-Behnken response surface methodology
    Su, Cheng-yuan
    Li, Wei-guang
    Liu, Xing-zhe
    Zhang, Lei
    [J]. DESALINATION AND WATER TREATMENT, 2014, 52 (4-6) : 880 - 888
  • [43] Optimization of nickel oxide nanoparticle synthesis through the sol-gel method using Box-Behnken design
    Ba-Abbad, Muneer M.
    Chai, Pui Vun
    Takriff, Mohd S.
    Benamor, Abdelbaki
    Mohammad, Abdul Wahab
    [J]. MATERIALS & DESIGN, 2015, 86 : 948 - 956
  • [44] Optimization of Process Parameters for Pellet Production from Corn Stalk Rinds Using Box-Behnken Design
    Liu, Dan
    Teng, Da
    Zhu, Yan
    Wang, Xingde
    Wang, Hanyang
    [J]. ENERGIES, 2023, 16 (12)
  • [45] Extraction of Peanut Oil Using Thermosonication: Modeling and Multiobjective Optimization of Process Parameters Using Box-Behnken Design
    Ketenoglu, Onur
    [J]. JOURNAL OF OLEO SCIENCE, 2020, 69 (06) : 585 - 595
  • [46] Effect of Electrolysis Parameters on the Specific Surface Area of Nickel Powder: Optimization using Box-Behnken Design
    Abbar, Ali H.
    [J]. INTERNATIONAL JOURNAL OF ELECTROCHEMICAL SCIENCE, 2019, 14 (01): : 662 - 678
  • [47] Formulation and optimization of solid lipid nanoparticle formulation for pulmonary delivery of budesonide using Taguchi and Box-Behnken design
    Emami, J.
    Mohiti, H.
    Hamishehkar, H.
    Varshosaz, J.
    [J]. RESEARCH IN PHARMACEUTICAL SCIENCES, 2015, 10 (01) : 17 - 33
  • [48] Optimization of process parameters for acrylonitrile removal by a low-cost adsorbent using Box-Behnken design
    Kumar, Arvind
    Prasad, B.
    Mishra, I. M.
    [J]. JOURNAL OF HAZARDOUS MATERIALS, 2008, 150 (01) : 174 - 182
  • [49] Optimization of Operating Parameters on Dry Grinding of Calcite in a Stirred Media Mill Using the Box-Behnken Design
    Katirciodlu-Bayel, Diler
    [J]. MINERALS, 2020, 10 (03)
  • [50] Application of Box-Behnken factorial design for parameters optimization of basic dye removal using nano-hematite photo-Fenton tool
    Tayeb, Aghareed M.
    Tony, Maha A.
    Mansour, Shehab A.
    [J]. APPLIED WATER SCIENCE, 2018, 8 (05)