Flow Structures Around Proposed Bridge Piers

被引:0
|
作者
Pasupuleti, Laxmi Narayana [1 ]
Timbadiya, Praful Kumar Vasharam Bhai [2 ]
Patel, Prem Lal [2 ]
机构
[1] Aditya Engn Coll, Dept Civil Engn, Surampalem, Andhra Pradesh, India
[2] Sardar Vallabhbhai Natl Inst Technol, Dept Civil Engn, Surat, Gujarat, India
关键词
Proposed bridge; vector fields; turbulence intensity; Reynolds shear stresses; local scour; SCOUR;
D O I
暂无
中图分类号
O63 [高分子化学(高聚物)];
学科分类号
070305 ; 080501 ; 081704 ;
摘要
The current study investigated the flow hydrodynamics around proposed bridge pier and made comparison with existing bridge pier. To quantify the flow structures around the piers, the flow and turbulence parameters are analysed to understand the interference of one bridge pier over another. The experiments were performed on recirculating channel of 15 m length, 0.89 m width and 0.65 m height. Instantaneous three-dimensional velocity data was recorded by acoustic Doppler velocimeter at different radial planes alpha = 0 degrees, 45 degrees, 90 degrees, 135 degrees and 180 degrees around the piers of both the bridges, where the distance (centre to centre) was maintained two times the diameter of pier (d = 8.8 cm). The flow structures, velocity fields, vector patterns, distributions of turbulence fields are analysed around the piers. The results of planned bridge pier are compared with existing one under identical flow in the clear waters. The results from the current study reveal that the flow velocity was decreased by 30% of the mean flow velocity at a = 180 degrees. Further, the turbulence was significantly reduced around the proposed bridge pier with respect to existing, due to sheltering effect imposed by the front pier. Turbulence intensities, turbulent kinetic energy and Reynolds shear stresses are decreased by 30%, 40% and 30%, respectively. Due to the horseshoe vortex, strength is reduced by 30% around new pier vis-a-vis the old one. The present study recommends that the placement of new bridge pier should be 2 to 3 times the diameter of the pier to avoid more scouring.
引用
收藏
页码:S14 / S21
页数:8
相关论文
共 50 条
  • [31] Estimation of Floats Flow Measurement by Means of Three Dimensional Flow Analyses around Bridge Piers
    Kadota, Akihiro
    Okada, Shoji
    [J]. PROCEEDINGS OF THE 35TH IAHR WORLD CONGRESS, VOLS I AND II, 2013, : 4917 - 4925
  • [32] Simulation of flow around piers
    Ali, KHM
    Karim, O
    [J]. JOURNAL OF HYDRAULIC RESEARCH, 2002, 40 (02) : 161 - 174
  • [33] Detailed turbulent structures investigation around piers group induced flow
    Ikani, Nima
    Pu, Jaan H.
    Zang, Shuyan
    Al-Qadami, Ebrahim Hamid Hussein
    Razi, Adib
    [J]. EXPERIMENTAL THERMAL AND FLUID SCIENCE, 2024, 152
  • [34] Monitoring of scour around bridge piers and abutments
    Topczewski, Lukasz
    Ciesla, Juliusz
    Mikolajewski, Pawel
    Adamski, Pawel
    Markowski, Zenon
    [J]. TRANSPORT RESEARCH ARENA TRA2016, 2016, 14 : 3963 - 3971
  • [35] THE AREA OF SCOUR HOLE AROUND BRIDGE PIERS
    WANG, TW
    CHANG, SZ
    [J]. SEDIMENT TRANSPORT MODELING: PROCEEDINGS OF AN INTERNATIONAL SYMPOSIUM, 1989, : 468 - 473
  • [36] Influence of cohesion on scour around bridge piers
    Ansari, SA
    Kothyari, UC
    Raju, KGR
    [J]. JOURNAL OF HYDRAULIC RESEARCH, 2002, 40 (06) : 717 - 729
  • [37] Local scour countermeasure around bridge piers
    Kim, UY
    Park, H
    Yoo, KH
    [J]. RISK ANALYSIS II, 2000, 3 : 543 - 551
  • [38] Clear water scour around bridge piers
    Igarashi, Tamotsu
    Tsutsui, Takayuki
    Iigatani, Takahiro
    [J]. Nippon Kikai Gakkai Ronbunshu, B Hen/Transactions of the Japan Society of Mechanical Engineers, Part B, 1994, 60 (578): : 3352 - 3358
  • [39] Numerical Simulation of the Flow and Local Scour Process around Single and Complex Bridge Piers
    Alemi, Mahdi
    Maia, Rodrigo
    [J]. INTERNATIONAL JOURNAL OF CIVIL ENGINEERING, 2018, 16 (5A) : 475 - 487
  • [40] Numerical Evaluation of AASHTO Drag Force Coefficients of Water Flow Around Bridge Piers
    Almasri, Amin
    Moqbel, Shadi
    [J]. JOURNAL OF ENGINEERING MATERIALS AND TECHNOLOGY-TRANSACTIONS OF THE ASME, 2017, 139 (02):