Effect of the variation of oxygen concentration on the laminar burning velocities of hydrogen-enriched methane flames

The combustion properties of hydrogen-containing fuel mixtures and the effect of the variation of the oxygen content of the oxidizer are at the center of recent research interest. Laminar burning velocity measurements with varied oxygen content can help in the validation of reaction mechanisms for better simulations of combustion systems using exhaust gas recirculation (EGR) or oxygen-enriched atmosphere. Such measurements were carried out in hydrogen-enriched methane-air flames using the heat flux method with higher accuracy and a wider range of initial oxygen and hydrogen concentrations compared to the similar studies in the literature. The mole fractions of the hydrogen and oxygen contents of the initial fuel and oxidizer mixtures were varied between xH2 = 0 and 0.20, and xO2 = 0.14 and 0.23, respectively. The initial gas temperature and pressure were 298 K and 1 bar, respectively. It is demonstrated that the increase of combustion rate by the hydrogen enrichment can be compensated with the decrease of the oxygen content. This compensating effect was investigated in detail in a wide range of equivalence ratio (4). The experimental data were simulated with 11 widely used methane combustion reaction mechanisms. The prediction accuracies of the mechanisms at lean and rich equivalence ratios were significantly different and the important reaction steps were identified using sensitivity analysis for three mechanisms. Mechanisms POLIMI-2014 and Caltech-2015 gave the best overall predictions.(c) 2023 Hydrogen Energy Publications LLC. Published by Elsevier Ltd. All rights reserved.