Solid-state surface alloying of ZK60 Mg alloy with tin using friction stir processing

被引：1
|
作者：
Lingampalli, Bhavya [1 ]
Dondapati, Sreekanth [1 ,2 ]
机构：
[1] Vellore Inst Technol, Sch Mech Engn, Chennai, India
[2] Vellore Inst Technol, Sch Mech Engn, Chennai Campus,Vandalur Kelambakkam Rd, Chennai 600127, Tamilnadu, India
来源：
MATERIALS TECHNOLOGY | 2024年 / 39卷 / 01期
关键词：
Friction stir processing; ZK60 Mg alloy; surface alloy; corrosion; tin; MECHANICAL-PROPERTIES; PROCESS PARAMETERS; MG-2ZN-2GD ALLOY; DEFORMATION; ALUMINUM; BEHAVIOR;
D O I：
10.1080/10667857.2024.2318886
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
The present study aims to alloy the surface of ZK60 Mg alloy with Sn using friction stir processing (FSP). Experiments were conducted with the combination of higher and lower values of tool rotational speed and feed rate to evaluate the best combination of parameters for the alloy formation. The surface alloy has been successfully formed with improved hardness and corrosion properties in the combination of higher rotational speed of 2800 rpm and lower processing speed of 0.6 mm/min, which was attributed to the proper diffusion of Sn particles at the higher temperature produced in that combination of parameters.
引用
收藏
页数：6
相关论文
共 50 条
  • [41] Effect of cryogenic cooling on machinability and surface quality of bio-degradable ZK60 Mg alloy
    Dinesh, S.
    Senthilkumar, V.
    Asokan, P.
    Arulkirubakaran, D.
    MATERIALS & DESIGN, 2015, 87 : 1030 - 1036
  • [42] Microstructure and Residual Stresses in a Friction Stir Welded Butt Joint of as-cast ZK60 Alloy Containing Rare Earths
    da Silva, Erenilton Pereira
    Oliveira, Verona Biancardi
    Pereira, Victor Ferrinho
    Maluf, Omar
    Buzolin, Ricardo Henrique
    Pinto, Haroldo Cavalcanti
    MATERIALS RESEARCH-IBERO-AMERICAN JOURNAL OF MATERIALS, 2017, 20 (03): : 775 - 779
  • [43] Optimization of friction stir process parameters for enhanced mechanical properties in surface-alloyed ZK60 magnesium with Tin (Sn): an RSM-ANN hybrid approach
    Lingampalli, Bhavya
    Dondapati, Sreekanth
    PRODUCTION AND MANUFACTURING RESEARCH-AN OPEN ACCESS JOURNAL, 2024, 12 (01):
  • [44] Microstructure, corrosion behavior, and surface mechanical properties of Fe oxide coatings on biomedical ZK60 Mg alloy
    Zheng, Yang
    Ma, Yinglei
    Zang, Libin
    Chen, Yong
    MATERIALS AND CORROSION-WERKSTOFFE UND KORROSION, 2019, 70 (12): : 2292 - 2302
  • [45] Enhanced corrosion resistance of Mg alloy ZK60 after processing by integrated extrusion and equal channel angular pressing
    Orlov, D.
    Ralston, K. D.
    Birbilis, N.
    Estrin, Y.
    ACTA MATERIALIA, 2011, 59 (15) : 6176 - 6186
  • [46] Surface solid-state amorphization of accumulative roll bonded Cu-Zr laminates by friction stir processing
    Sun, Yufeng
    Rong, Zeyu
    Guan, Shaokang
    MATERIALS LETTERS, 2020, 279
  • [47] Friction Stir Surface Processing of Al 6061 Alloy: Role of Surface Alloying with Copper and Heat-Treatment
    Kaustubh M. Mane
    Santosh S. Hosmani
    Transactions of the Indian Institute of Metals, 2018, 71 : 1411 - 1425
  • [48] Friction Stir Surface Processing of Al 6061 Alloy: Role of Surface Alloying with Copper and Heat-Treatment
    Mane, Kaustubh M.
    Hosmani, Santosh S.
    TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS, 2018, 71 (06) : 1411 - 1425
  • [49] Experimental studies on the cryogenic machining of biodegradable ZK60 Mg alloy using micro-textured tools
    Dinesh, S.
    Senthilkumar, V.
    Asokan, P.
    MATERIALS AND MANUFACTURING PROCESSES, 2017, 32 (09) : 979 - 987
  • [50] Role of tool pin profiles on wear characteristics of friction stir processed magnesium alloy ZK60/silicon carbide surface compositesEinfluss von Pinprofilen auf die Verschleisseigenschaften bei der Ruhrreibbearbeitung von Oberflachenverbundwerkstoffen aus Magnesiumlegierung ZK60/Siliziumkarbid
    Kumar, M. Vignesh
    Padmanaban, G.
    Balasubramanian, V
    MATERIALWISSENSCHAFT UND WERKSTOFFTECHNIK, 2020, 51 (02) : 140 - 152
12345