The Influence of Zn Doping on the Cation Distribution and Antibacterial Activity of CoFe2O4

Nanoparticles of formula Co1-xZnxFe2O4 (x = 0.0, 0.3, and 0.5) were prepared successfully using a citrate-auto-combustion method. This work studies the substitution effect of the Zn2+ ion on the physical, chemical, and structural properties of CoFe2O4. The structure of the prepared samples was determined via X-ray diffraction (XRD) and Fourier transformed infrared spectrometer (FTIR). X-ray diffraction of the investigated samples ensures that all the prepared samples crystallite into single structure. There is a variation of crystallite size with change in Zn concentration as it is observed that the crystallite size increased from 16.01 to 30.56 nm by increasing Zn concentration. The Fourier transform infrared spectra (FTIR) in range (390:4000) Cm-1 were used for studying the elastic properties of the prepared spinel ferrites. It is observed that, by increasing Zn concentration, all elastic moduli increased. The morphological and surface study of the calcined samples was investigated by scanning electron microscopy (SEM) and Gwyddion 2.45 software respectively. The roughness average (R-a) was 35.20 nm at x = 0 and increased to 46.6 nm at x = 0.5. At the room temperature, magnetic behavior of the all studied samples was studied. It is observed that the maximum saturation magnetization was 67.611emu/gm and it was related to Co0.7Zn0.3Fe2O4 while the highest value of exchange bias (H-EB) was 2.15 Oe for Co0.5Zn0.5Fe2O4. The antibacterial activity of CoFe2O4, Co0.7Zn0.3Fe2O4, and Co0.5Zn0.5Fe2O4 was successfully tested against Escherichia coli and Staphylococcus aureus bacteria. The highest inhibition zone of Co1-xZnxFe2O4 values was 8 and 7.5 mm for E. coli and S. aureus, respectively, and these values were observed for x = 0.5. Generally, these results exhibit a high possible of ferrites for using in antibacterial applications.